2023-08-16 00:20:26 +10:00
|
|
|
/* SPDX-FileCopyrightText: 2023 Blender Authors
|
2023-05-31 16:19:06 +02:00
|
|
|
*
|
|
|
|
|
* SPDX-License-Identifier: GPL-2.0-or-later */
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
|
2023-05-15 15:14:22 +02:00
|
|
|
#include "BKE_node.hh"
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
#include "BKE_node_runtime.hh"
|
|
|
|
|
#include "BKE_node_tree_zones.hh"
|
|
|
|
|
|
|
|
|
|
#include "BLI_bit_group_vector.hh"
|
|
|
|
|
#include "BLI_bit_span_ops.hh"
|
2023-06-26 14:33:04 +02:00
|
|
|
#include "BLI_set.hh"
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
#include "BLI_task.hh"
|
|
|
|
|
#include "BLI_timeit.hh"
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
namespace blender::bke {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
static void update_zone_depths(bNodeTreeZone &zone)
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
{
|
|
|
|
|
if (zone.depth >= 0) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
if (zone.parent_zone == nullptr) {
|
|
|
|
|
zone.depth = 0;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
update_zone_depths(*zone.parent_zone);
|
|
|
|
|
zone.depth = zone.parent_zone->depth + 1;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
static Vector<std::unique_ptr<bNodeTreeZone>> find_zone_nodes(
|
|
|
|
|
const bNodeTree &tree,
|
|
|
|
|
bNodeTreeZones &owner,
|
|
|
|
|
Map<const bNode *, bNodeTreeZone *> &r_zone_by_inout_node)
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
{
|
2023-09-20 14:40:56 +02:00
|
|
|
const Span<const bNodeZoneType *> zone_types = all_zone_types();
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
Vector<std::unique_ptr<bNodeTreeZone>> zones;
|
2023-07-11 22:36:10 +02:00
|
|
|
Vector<const bNode *> zone_output_nodes;
|
2023-09-20 14:40:56 +02:00
|
|
|
for (const bNodeZoneType *zone_type : zone_types) {
|
|
|
|
|
zone_output_nodes.extend(tree.nodes_by_type(zone_type->output_idname));
|
|
|
|
|
}
|
2023-07-11 22:36:10 +02:00
|
|
|
for (const bNode *node : zone_output_nodes) {
|
2023-06-20 10:25:41 +02:00
|
|
|
auto zone = std::make_unique<bNodeTreeZone>();
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
zone->owner = &owner;
|
|
|
|
|
zone->index = zones.size();
|
|
|
|
|
zone->output_node = node;
|
|
|
|
|
r_zone_by_inout_node.add(node, zone.get());
|
|
|
|
|
zones.append_and_get_index(std::move(zone));
|
|
|
|
|
}
|
2023-09-20 14:40:56 +02:00
|
|
|
for (const bNodeZoneType *zone_type : zone_types) {
|
|
|
|
|
for (const bNode *input_node : tree.nodes_by_type(zone_type->input_idname)) {
|
|
|
|
|
if (const bNode *output_node = zone_type->get_corresponding_output(tree, *input_node)) {
|
|
|
|
|
if (bNodeTreeZone *zone = r_zone_by_inout_node.lookup_default(output_node, nullptr)) {
|
|
|
|
|
zone->input_node = input_node;
|
|
|
|
|
r_zone_by_inout_node.add(input_node, zone);
|
|
|
|
|
}
|
2023-07-11 22:36:10 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
return zones;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
struct ZoneRelation {
|
2023-06-20 10:25:41 +02:00
|
|
|
bNodeTreeZone *parent;
|
|
|
|
|
bNodeTreeZone *child;
|
2023-08-30 14:50:53 +02:00
|
|
|
|
|
|
|
|
uint64_t hash() const
|
|
|
|
|
{
|
|
|
|
|
return get_default_hash_2(this->parent, this->child);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
friend bool operator==(const ZoneRelation &a, const ZoneRelation &b)
|
|
|
|
|
{
|
|
|
|
|
return a.parent == b.parent && a.child == b.child;
|
|
|
|
|
}
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
};
|
|
|
|
|
|
2023-08-30 14:50:53 +02:00
|
|
|
static std::optional<Vector<ZoneRelation>> get_direct_zone_relations(
|
2023-06-20 10:25:41 +02:00
|
|
|
const Span<std::unique_ptr<bNodeTreeZone>> all_zones,
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
const BitGroupVector<> &depend_on_input_flag_array)
|
|
|
|
|
{
|
2023-08-30 14:50:53 +02:00
|
|
|
VectorSet<ZoneRelation> all_zone_relations;
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
|
|
|
|
|
/* Gather all relations, even the transitive once. */
|
2023-06-20 10:25:41 +02:00
|
|
|
for (const std::unique_ptr<bNodeTreeZone> &zone : all_zones) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
const int zone_i = zone->index;
|
|
|
|
|
for (const bNode *node : {zone->output_node}) {
|
|
|
|
|
if (node == nullptr) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
const BoundedBitSpan depend_on_input_flags = depend_on_input_flag_array[node->index()];
|
|
|
|
|
bits::foreach_1_index(depend_on_input_flags, [&](const int parent_zone_i) {
|
|
|
|
|
if (parent_zone_i != zone_i) {
|
2023-08-30 14:50:53 +02:00
|
|
|
all_zone_relations.add_new({all_zones[parent_zone_i].get(), zone.get()});
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2023-08-30 14:50:53 +02:00
|
|
|
for (const ZoneRelation &relation : all_zone_relations) {
|
|
|
|
|
const ZoneRelation reverse_relation{relation.child, relation.parent};
|
|
|
|
|
if (all_zone_relations.contains(reverse_relation)) {
|
|
|
|
|
/* There is a cyclic zone dependency. */
|
|
|
|
|
return std::nullopt;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
/* Remove transitive relations. This is a brute force algorithm currently. */
|
|
|
|
|
Vector<int> transitive_relations;
|
2023-08-30 14:50:53 +02:00
|
|
|
for (const int a : all_zone_relations.index_range()) {
|
|
|
|
|
const ZoneRelation &relation_a = all_zone_relations[a];
|
|
|
|
|
for (const int b : all_zone_relations.index_range()) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
if (a == b) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
2023-08-30 14:50:53 +02:00
|
|
|
const ZoneRelation &relation_b = all_zone_relations[b];
|
|
|
|
|
if (relation_a.child != relation_b.parent) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
const ZoneRelation transitive_relation{relation_a.parent, relation_b.child};
|
|
|
|
|
const int transitive_relation_i = all_zone_relations.index_of_try(transitive_relation);
|
|
|
|
|
if (transitive_relation_i != -1) {
|
|
|
|
|
transitive_relations.append_non_duplicates(transitive_relation_i);
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
std::sort(transitive_relations.begin(), transitive_relations.end(), std::greater<>());
|
2023-08-30 14:50:53 +02:00
|
|
|
|
|
|
|
|
Vector<ZoneRelation> zone_relations = all_zone_relations.as_span();
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
for (const int i : transitive_relations) {
|
|
|
|
|
zone_relations.remove_and_reorder(i);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return zone_relations;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-26 14:33:04 +02:00
|
|
|
static bool update_zone_per_node(const Span<const bNode *> all_nodes,
|
2023-06-20 10:25:41 +02:00
|
|
|
const Span<std::unique_ptr<bNodeTreeZone>> all_zones,
|
2023-06-16 10:44:47 +02:00
|
|
|
const BitGroupVector<> &depend_on_input_flag_array,
|
2023-06-20 10:25:41 +02:00
|
|
|
const Map<const bNode *, bNodeTreeZone *> &zone_by_inout_node,
|
2023-06-16 10:44:47 +02:00
|
|
|
Map<int, int> &r_zone_by_node_id,
|
|
|
|
|
Vector<const bNode *> &r_node_outside_zones)
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
{
|
2023-06-26 14:33:04 +02:00
|
|
|
bool found_node_in_multiple_zones = false;
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
for (const int node_i : all_nodes.index_range()) {
|
|
|
|
|
const bNode &node = *all_nodes[node_i];
|
|
|
|
|
const BoundedBitSpan depend_on_input_flags = depend_on_input_flag_array[node_i];
|
2023-06-20 10:25:41 +02:00
|
|
|
bNodeTreeZone *parent_zone = nullptr;
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
bits::foreach_1_index(depend_on_input_flags, [&](const int parent_zone_i) {
|
2023-06-20 10:25:41 +02:00
|
|
|
bNodeTreeZone *zone = all_zones[parent_zone_i].get();
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
if (ELEM(&node, zone->input_node, zone->output_node)) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
2023-06-26 14:33:04 +02:00
|
|
|
if (parent_zone == nullptr) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
parent_zone = zone;
|
2023-06-26 14:33:04 +02:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
for (bNodeTreeZone *iter_zone = zone->parent_zone; iter_zone;
|
|
|
|
|
iter_zone = iter_zone->parent_zone) {
|
|
|
|
|
if (iter_zone == parent_zone) {
|
|
|
|
|
/* This zone is nested in the parent zone, so it becomes the new parent of the node. */
|
|
|
|
|
parent_zone = zone;
|
|
|
|
|
return;
|
|
|
|
|
}
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
}
|
2023-06-26 14:33:04 +02:00
|
|
|
for (bNodeTreeZone *iter_zone = parent_zone->parent_zone; iter_zone;
|
|
|
|
|
iter_zone = iter_zone->parent_zone)
|
|
|
|
|
{
|
|
|
|
|
if (iter_zone == zone) {
|
|
|
|
|
/* This zone is a parent of the current parent of the node, do nothing. */
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
found_node_in_multiple_zones = true;
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
});
|
2023-06-16 10:44:47 +02:00
|
|
|
if (parent_zone == nullptr) {
|
|
|
|
|
if (!zone_by_inout_node.contains(&node)) {
|
|
|
|
|
r_node_outside_zones.append(&node);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
r_zone_by_node_id.add(node.identifier, parent_zone->index);
|
|
|
|
|
}
|
|
|
|
|
}
|
2023-06-20 10:25:41 +02:00
|
|
|
for (const MapItem<const bNode *, bNodeTreeZone *> item : zone_by_inout_node.items()) {
|
2023-06-16 10:44:47 +02:00
|
|
|
r_zone_by_node_id.add_overwrite(item.key->identifier, item.value->index);
|
|
|
|
|
}
|
2023-06-26 14:33:04 +02:00
|
|
|
return found_node_in_multiple_zones;
|
2023-06-16 10:44:47 +02:00
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
static void update_zone_border_links(const bNodeTree &tree, bNodeTreeZones &tree_zones)
|
2023-06-16 10:44:47 +02:00
|
|
|
{
|
|
|
|
|
for (const bNodeLink *link : tree.all_links()) {
|
|
|
|
|
if (!link->is_available()) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
if (link->is_muted()) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
2023-06-20 10:25:41 +02:00
|
|
|
bNodeTreeZone *from_zone = const_cast<bNodeTreeZone *>(
|
|
|
|
|
tree_zones.get_zone_by_socket(*link->fromsock));
|
|
|
|
|
bNodeTreeZone *to_zone = const_cast<bNodeTreeZone *>(
|
|
|
|
|
tree_zones.get_zone_by_socket(*link->tosock));
|
2023-06-16 10:44:47 +02:00
|
|
|
if (from_zone == to_zone) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
BLI_assert(from_zone == nullptr || from_zone->contains_zone_recursively(*to_zone));
|
2023-06-20 10:25:41 +02:00
|
|
|
for (bNodeTreeZone *zone = to_zone; zone != from_zone; zone = zone->parent_zone) {
|
2023-06-16 10:44:47 +02:00
|
|
|
zone->border_links.append(link);
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
static std::unique_ptr<bNodeTreeZones> discover_tree_zones(const bNodeTree &tree)
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
{
|
2023-08-30 12:37:21 +02:00
|
|
|
tree.ensure_topology_cache();
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
if (tree.has_available_link_cycle()) {
|
|
|
|
|
return {};
|
|
|
|
|
}
|
|
|
|
|
|
2023-09-20 14:40:56 +02:00
|
|
|
const Span<int> input_types = all_zone_input_node_types();
|
|
|
|
|
const Span<int> output_types = all_zone_output_node_types();
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
std::unique_ptr<bNodeTreeZones> tree_zones = std::make_unique<bNodeTreeZones>();
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
|
|
|
|
|
const Span<const bNode *> all_nodes = tree.all_nodes();
|
2023-06-20 10:25:41 +02:00
|
|
|
Map<const bNode *, bNodeTreeZone *> zone_by_inout_node;
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
tree_zones->zones = find_zone_nodes(tree, *tree_zones, zone_by_inout_node);
|
|
|
|
|
|
|
|
|
|
const int zones_num = tree_zones->zones.size();
|
|
|
|
|
const int nodes_num = all_nodes.size();
|
|
|
|
|
/* A bit for every node-zone-combination. The bit is set when the node is in the zone. */
|
|
|
|
|
BitGroupVector<> depend_on_input_flag_array(nodes_num, zones_num, false);
|
|
|
|
|
/* The bit is set when the node depends on the output of the zone. */
|
|
|
|
|
BitGroupVector<> depend_on_output_flag_array(nodes_num, zones_num, false);
|
|
|
|
|
|
|
|
|
|
const Span<const bNode *> sorted_nodes = tree.toposort_left_to_right();
|
|
|
|
|
for (const bNode *node : sorted_nodes) {
|
|
|
|
|
const int node_i = node->index();
|
|
|
|
|
MutableBoundedBitSpan depend_on_input_flags = depend_on_input_flag_array[node_i];
|
|
|
|
|
MutableBoundedBitSpan depend_on_output_flags = depend_on_output_flag_array[node_i];
|
|
|
|
|
|
|
|
|
|
/* Forward all bits from the nodes to the left. */
|
|
|
|
|
for (const bNodeSocket *input_socket : node->input_sockets()) {
|
|
|
|
|
if (!input_socket->is_available()) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
for (const bNodeLink *link : input_socket->directly_linked_links()) {
|
|
|
|
|
if (link->is_muted()) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
const bNode &from_node = *link->fromnode;
|
|
|
|
|
const int from_node_i = from_node.index();
|
|
|
|
|
depend_on_input_flags |= depend_on_input_flag_array[from_node_i];
|
|
|
|
|
depend_on_output_flags |= depend_on_output_flag_array[from_node_i];
|
|
|
|
|
}
|
|
|
|
|
}
|
2023-09-20 14:40:56 +02:00
|
|
|
if (input_types.contains(node->type)) {
|
2023-06-20 10:25:41 +02:00
|
|
|
if (const bNodeTreeZone *zone = zone_by_inout_node.lookup_default(node, nullptr)) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
/* Now entering a zone, so set the corresponding bit. */
|
|
|
|
|
depend_on_input_flags[zone->index].set();
|
|
|
|
|
}
|
|
|
|
|
}
|
2023-09-20 14:40:56 +02:00
|
|
|
else if (output_types.contains(node->type)) {
|
2023-06-20 10:25:41 +02:00
|
|
|
if (const bNodeTreeZone *zone = zone_by_inout_node.lookup_default(node, nullptr)) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
/* The output is implicitly linked to the input, so also propagate the bits from there. */
|
|
|
|
|
if (const bNode *zone_input_node = zone->input_node) {
|
|
|
|
|
const int input_node_i = zone_input_node->index();
|
|
|
|
|
depend_on_input_flags |= depend_on_input_flag_array[input_node_i];
|
|
|
|
|
depend_on_output_flags |= depend_on_output_flag_array[input_node_i];
|
|
|
|
|
}
|
|
|
|
|
/* Now exiting a zone, so change the bits accordingly. */
|
|
|
|
|
depend_on_input_flags[zone->index].reset();
|
|
|
|
|
depend_on_output_flags[zone->index].set();
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (bits::has_common_set_bits(depend_on_input_flags, depend_on_output_flags)) {
|
|
|
|
|
/* A node can not be inside and after a zone at the same time. */
|
|
|
|
|
return {};
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2023-08-30 14:50:53 +02:00
|
|
|
const std::optional<Vector<ZoneRelation>> zone_relations = get_direct_zone_relations(
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
tree_zones->zones, depend_on_input_flag_array);
|
2023-08-30 14:50:53 +02:00
|
|
|
if (!zone_relations) {
|
|
|
|
|
/* Found cyclic relations. */
|
|
|
|
|
return {};
|
|
|
|
|
}
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
|
|
|
|
|
/* Set parent and child pointers in zones. */
|
2023-08-30 14:50:53 +02:00
|
|
|
for (const ZoneRelation &relation : *zone_relations) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
relation.parent->child_zones.append(relation.child);
|
|
|
|
|
BLI_assert(relation.child->parent_zone == nullptr);
|
|
|
|
|
relation.child->parent_zone = relation.parent;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-26 14:33:04 +02:00
|
|
|
Set<const bNodeTreeZone *> found_zones;
|
|
|
|
|
for (std::unique_ptr<bNodeTreeZone> &main_zone : tree_zones->zones) {
|
|
|
|
|
found_zones.clear();
|
|
|
|
|
for (bNodeTreeZone *zone = main_zone.get(); zone; zone = zone->parent_zone) {
|
|
|
|
|
if (!found_zones.add(zone)) {
|
|
|
|
|
/* Found cyclic parent relationships between zones. */
|
|
|
|
|
return {};
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
/* Update depths. */
|
2023-06-20 10:25:41 +02:00
|
|
|
for (std::unique_ptr<bNodeTreeZone> &zone : tree_zones->zones) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
update_zone_depths(*zone);
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
for (std::unique_ptr<bNodeTreeZone> &zone : tree_zones->zones) {
|
2023-06-16 10:44:47 +02:00
|
|
|
if (zone->depth == 0) {
|
|
|
|
|
tree_zones->root_zones.append(zone.get());
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-26 14:33:04 +02:00
|
|
|
const bool found_node_in_multiple_zones = update_zone_per_node(all_nodes,
|
|
|
|
|
tree_zones->zones,
|
|
|
|
|
depend_on_input_flag_array,
|
|
|
|
|
zone_by_inout_node,
|
|
|
|
|
tree_zones->zone_by_node_id,
|
|
|
|
|
tree_zones->nodes_outside_zones);
|
|
|
|
|
if (found_node_in_multiple_zones) {
|
|
|
|
|
return {};
|
|
|
|
|
}
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
|
2023-06-27 10:07:09 +02:00
|
|
|
for (const bNode *node : tree.nodes_by_type("NodeGroupOutput")) {
|
|
|
|
|
if (tree_zones->zone_by_node_id.contains(node->identifier)) {
|
|
|
|
|
/* Group output nodes must not be in a zone. */
|
|
|
|
|
return {};
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
for (const int node_i : all_nodes.index_range()) {
|
|
|
|
|
const bNode *node = all_nodes[node_i];
|
2023-06-16 10:44:47 +02:00
|
|
|
const int zone_i = tree_zones->zone_by_node_id.lookup_default(node->identifier, -1);
|
|
|
|
|
if (zone_i == -1) {
|
|
|
|
|
continue;
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
}
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZone &zone = *tree_zones->zones[zone_i];
|
2023-06-16 10:44:47 +02:00
|
|
|
if (ELEM(node, zone.input_node, zone.output_node)) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
tree_zones->zones[zone_i]->child_nodes.append(node);
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
}
|
|
|
|
|
|
2023-06-16 10:44:47 +02:00
|
|
|
update_zone_border_links(tree, *tree_zones);
|
|
|
|
|
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
return tree_zones;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZones *get_tree_zones(const bNodeTree &tree)
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
{
|
2023-08-23 08:51:05 +02:00
|
|
|
tree.ensure_topology_cache();
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
tree.runtime->tree_zones_cache_mutex.ensure(
|
|
|
|
|
[&]() { tree.runtime->tree_zones = discover_tree_zones(tree); });
|
|
|
|
|
return tree.runtime->tree_zones.get();
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
bool bNodeTreeZone::contains_node_recursively(const bNode &node) const
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
{
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZones *zones = this->owner;
|
2023-06-16 10:44:47 +02:00
|
|
|
const int zone_i = zones->zone_by_node_id.lookup_default(node.identifier, -1);
|
|
|
|
|
if (zone_i == -1) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
return false;
|
|
|
|
|
}
|
2023-06-20 10:25:41 +02:00
|
|
|
for (const bNodeTreeZone *zone = zones->zones[zone_i].get(); zone; zone = zone->parent_zone) {
|
Geometry Nodes: add simulation support
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
2023-05-03 13:18:51 +02:00
|
|
|
if (zone == this) {
|
|
|
|
|
return true;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return false;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
bool bNodeTreeZone::contains_zone_recursively(const bNodeTreeZone &other_zone) const
|
2023-06-16 10:44:47 +02:00
|
|
|
{
|
2023-06-20 10:25:41 +02:00
|
|
|
for (const bNodeTreeZone *zone = other_zone.parent_zone; zone; zone = zone->parent_zone) {
|
2023-06-16 10:44:47 +02:00
|
|
|
if (zone == this) {
|
|
|
|
|
return true;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return false;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZone *bNodeTreeZones::get_zone_by_socket(const bNodeSocket &socket) const
|
2023-06-16 10:44:47 +02:00
|
|
|
{
|
|
|
|
|
const bNode &node = socket.owner_node();
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZone *zone = this->get_zone_by_node(node.identifier);
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
if (zone == nullptr) {
|
|
|
|
|
return zone;
|
2023-06-16 10:44:47 +02:00
|
|
|
}
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
if (zone->input_node == &node) {
|
2023-06-16 10:44:47 +02:00
|
|
|
if (socket.is_input()) {
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
return zone->parent_zone;
|
2023-06-16 10:44:47 +02:00
|
|
|
}
|
|
|
|
|
}
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
if (zone->output_node == &node) {
|
2023-06-16 10:44:47 +02:00
|
|
|
if (socket.is_output()) {
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
return zone->parent_zone;
|
2023-06-16 10:44:47 +02:00
|
|
|
}
|
|
|
|
|
}
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
return zone;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZone *bNodeTreeZones::get_zone_by_node(const int32_t node_id) const
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
{
|
|
|
|
|
const int zone_i = this->zone_by_node_id.lookup_default(node_id, -1);
|
|
|
|
|
if (zone_i == -1) {
|
|
|
|
|
return nullptr;
|
|
|
|
|
}
|
|
|
|
|
return this->zones[zone_i].get();
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
Vector<const bNodeTreeZone *> bNodeTreeZones::get_zone_stack_for_node(const int node_id) const
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
{
|
2023-06-20 10:25:41 +02:00
|
|
|
const bNodeTreeZone *zone = this->get_zone_by_node(node_id);
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
if (zone == nullptr) {
|
|
|
|
|
return {};
|
|
|
|
|
}
|
2023-06-20 10:25:41 +02:00
|
|
|
Vector<const bNodeTreeZone *> zone_stack;
|
Geometry Nodes: make evaluation and logging system aware of zones
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
2023-06-20 09:50:44 +02:00
|
|
|
for (; zone; zone = zone->parent_zone) {
|
|
|
|
|
zone_stack.append(zone);
|
|
|
|
|
}
|
|
|
|
|
std::reverse(zone_stack.begin(), zone_stack.end());
|
|
|
|
|
return zone_stack;
|
2023-06-16 10:44:47 +02:00
|
|
|
}
|
|
|
|
|
|
2023-09-20 14:40:56 +02:00
|
|
|
const bNode *bNodeZoneType::get_corresponding_input(const bNodeTree &tree,
|
|
|
|
|
const bNode &output_bnode) const
|
|
|
|
|
{
|
|
|
|
|
for (const bNode *node : tree.nodes_by_type(this->input_idname)) {
|
|
|
|
|
if (this->get_corresponding_output_id(*node) == output_bnode.identifier) {
|
|
|
|
|
return node;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return nullptr;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
const bNode *bNodeZoneType::get_corresponding_output(const bNodeTree &tree,
|
|
|
|
|
const bNode &input_bnode) const
|
|
|
|
|
{
|
|
|
|
|
return tree.node_by_id(this->get_corresponding_output_id(input_bnode));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bNode *bNodeZoneType::get_corresponding_input(bNodeTree &tree, const bNode &output_bnode) const
|
|
|
|
|
{
|
|
|
|
|
return const_cast<bNode *>(
|
|
|
|
|
this->get_corresponding_input(const_cast<const bNodeTree &>(tree), output_bnode));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bNode *bNodeZoneType::get_corresponding_output(bNodeTree &tree, const bNode &input_bnode) const
|
|
|
|
|
{
|
|
|
|
|
return const_cast<bNode *>(
|
|
|
|
|
this->get_corresponding_output(const_cast<const bNodeTree &>(tree), input_bnode));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static Vector<const bNodeZoneType *> &get_zone_types_vector()
|
|
|
|
|
{
|
|
|
|
|
static Vector<const bNodeZoneType *> zone_types;
|
|
|
|
|
return zone_types;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
void register_node_zone_type(const bNodeZoneType &zone_type)
|
|
|
|
|
{
|
|
|
|
|
get_zone_types_vector().append(&zone_type);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
Span<const bNodeZoneType *> all_zone_types()
|
|
|
|
|
{
|
|
|
|
|
return get_zone_types_vector();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
Span<int> all_zone_node_types()
|
|
|
|
|
{
|
|
|
|
|
static const Vector<int> node_types = []() {
|
|
|
|
|
Vector<int> node_types;
|
|
|
|
|
for (const bNodeZoneType *zone_type : all_zone_types()) {
|
|
|
|
|
node_types.append(zone_type->input_type);
|
|
|
|
|
node_types.append(zone_type->output_type);
|
|
|
|
|
}
|
|
|
|
|
return node_types;
|
|
|
|
|
}();
|
|
|
|
|
return node_types;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
Span<int> all_zone_input_node_types()
|
|
|
|
|
{
|
|
|
|
|
static const Vector<int> node_types = []() {
|
|
|
|
|
Vector<int> node_types;
|
|
|
|
|
for (const bNodeZoneType *zone_type : all_zone_types()) {
|
|
|
|
|
node_types.append(zone_type->input_type);
|
|
|
|
|
}
|
|
|
|
|
return node_types;
|
|
|
|
|
}();
|
|
|
|
|
return node_types;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
Span<int> all_zone_output_node_types()
|
|
|
|
|
{
|
|
|
|
|
static const Vector<int> node_types = []() {
|
|
|
|
|
Vector<int> node_types;
|
|
|
|
|
for (const bNodeZoneType *zone_type : all_zone_types()) {
|
|
|
|
|
node_types.append(zone_type->output_type);
|
|
|
|
|
}
|
|
|
|
|
return node_types;
|
|
|
|
|
}();
|
|
|
|
|
return node_types;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
const bNodeZoneType *zone_type_by_node_type(const int node_type)
|
|
|
|
|
{
|
|
|
|
|
for (const bNodeZoneType *zone_type : all_zone_types()) {
|
|
|
|
|
if (ELEM(node_type, zone_type->input_type, zone_type->output_type)) {
|
|
|
|
|
return zone_type;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return nullptr;
|
|
|
|
|
}
|
|
|
|
|
|
2023-06-20 10:25:41 +02:00
|
|
|
} // namespace blender::bke
|