Files
test/source/blender/freestyle/intern/python/Interface0D/ViewVertex/BPy_TVertex.cpp

248 lines
8.3 KiB
C++
Raw Normal View History

2013-02-23 18:32:28 +00:00
/*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* ***** END GPL LICENSE BLOCK *****
*/
/** \file source/blender/freestyle/intern/python/Interface0D/ViewVertex/BPy_TVertex.cpp
* \ingroup freestyle
*/
#include "BPy_TVertex.h"
#include "../../BPy_Convert.h"
#include "../BPy_SVertex.h"
#include "../../BPy_Id.h"
#include "../../Interface1D/BPy_FEdge.h"
#include "../../Interface1D/BPy_ViewEdge.h"
#ifdef __cplusplus
extern "C" {
#endif
///////////////////////////////////////////////////////////////////////////////////////////
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
/*----------------------TVertex methods ----------------------------*/
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_doc,
"Class hierarchy: :class:`Interface0D` > :class:`ViewVertex` > :class:`TVertex`\n"
"\n"
"Class to define a T vertex, i.e. an intersection between two edges.\n"
"It points towards two SVertex and four ViewEdges. Among the\n"
"ViewEdges, two are front and the other two are back. Basically a\n"
"front edge hides part of a back edge. So, among the back edges, one\n"
"is of invisibility N and the other of invisibility N+1.\n"
"\n"
".. method:: __init__()\n"
"\n"
" Default constructor.");
/* Note: No copy constructor in Python because the C++ copy constructor is 'protected'. */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_init(BPy_TVertex *self, PyObject *args, PyObject *kwds)
{
static const char *kwlist[] = {NULL};
if (!PyArg_ParseTupleAndKeywords(args, kwds, "", (char **)kwlist))
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
return -1;
self->tv = new TVertex();
self->py_vv.vv = self->tv;
self->py_vv.py_if0D.if0D = self->tv;
self->py_vv.py_if0D.borrowed = false;
return 0;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_get_svertex_doc,
".. method:: get_svertex(fedge)\n"
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" Returns the SVertex (among the 2) belonging to the given FEdge.\n"
"\n"
" :arg fedge: An FEdge object.\n"
" :type fedge: :class:`FEdge`\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" :return: The SVertex belonging to the given FEdge.\n"
" :rtype: :class:`SVertex`");
static PyObject *TVertex_get_svertex( BPy_TVertex *self, PyObject *args, PyObject *kwds)
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{
static const char *kwlist[] = {"fedge", NULL};
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyObject *py_fe;
if (!PyArg_ParseTupleAndKeywords(args, kwds, "O!", (char **)kwlist, &FEdge_Type, &py_fe))
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
return NULL;
SVertex *sv = self->tv->getSVertex(((BPy_FEdge *)py_fe)->fe);
if (sv)
return BPy_SVertex_from_SVertex(*sv);
Py_RETURN_NONE;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_get_mate_doc,
".. method:: get_mate(viewedge)\n"
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" Returns the mate edge of the ViewEdge given as argument. If the\n"
" ViewEdge is frontEdgeA, frontEdgeB is returned. If the ViewEdge is\n"
" frontEdgeB, frontEdgeA is returned. Same for back edges.\n"
"\n"
" :arg viewedge: A ViewEdge object.\n"
" :type viewedge: :class:`ViewEdge`\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" :return: The mate edge of the given ViewEdge.\n"
" :rtype: :class:`ViewEdge`");
static PyObject *TVertex_get_mate( BPy_TVertex *self, PyObject *args, PyObject *kwds)
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{
static const char *kwlist[] = {"viewedge", NULL};
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyObject *py_ve;
if (!PyArg_ParseTupleAndKeywords(args, kwds, "O!", (char **)kwlist, &ViewEdge_Type, &py_ve))
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
return NULL;
ViewEdge *ve = self->tv->mate(((BPy_ViewEdge *)py_ve)->ve);
if (ve)
return BPy_ViewEdge_from_ViewEdge(*ve);
Py_RETURN_NONE;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyMethodDef BPy_TVertex_methods[] = {
{"get_svertex", (PyCFunction)TVertex_get_svertex, METH_VARARGS | METH_KEYWORDS, TVertex_get_svertex_doc},
{"get_mate", (PyCFunction)TVertex_get_mate, METH_VARARGS | METH_KEYWORDS, TVertex_get_mate_doc},
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{NULL, NULL, 0, NULL}
};
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
/*----------------------TVertex get/setters ----------------------------*/
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_front_svertex_doc,
"The SVertex that is closer to the viewpoint.\n"
"\n"
":type: :class:`SVertex`");
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyObject *TVertex_front_svertex_get(BPy_TVertex *self, void *UNUSED(closure))
{
SVertex *v = self->tv->frontSVertex();
if (v)
return BPy_SVertex_from_SVertex(*v);
Py_RETURN_NONE;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_front_svertex_set(BPy_TVertex *self, PyObject *value, void *UNUSED(closure))
{
if (!BPy_SVertex_Check(value)) {
PyErr_SetString(PyExc_TypeError, "value must be an SVertex");
return -1;
}
self->tv->setFrontSVertex(((BPy_SVertex *)value)->sv);
return 0;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_back_svertex_doc,
"The SVertex that is further away from the viewpoint.\n"
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
":type: :class:`SVertex`");
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyObject *TVertex_back_svertex_get(BPy_TVertex *self, void *UNUSED(closure))
{
SVertex *v = self->tv->backSVertex();
if (v)
return BPy_SVertex_from_SVertex(*v);
Py_RETURN_NONE;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_back_svertex_set(BPy_TVertex *self, PyObject *value, void *UNUSED(closure))
{
if (!BPy_SVertex_Check(value)) {
PyErr_SetString(PyExc_TypeError, "value must be an SVertex");
return -1;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
self->tv->setBackSVertex(((BPy_SVertex *)value)->sv);
return 0;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_id_doc,
"The Id of this TVertex.\n"
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
":type: :class:`Id`");
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyObject *TVertex_id_get(BPy_TVertex *self, void *UNUSED(closure))
{
Id id(self->tv->getId());
return BPy_Id_from_Id(id); // return a copy
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_id_set(BPy_TVertex *self, PyObject *value, void *UNUSED(closure))
{
if (!BPy_Id_Check(value)) {
PyErr_SetString(PyExc_TypeError, "value must be an Id");
return -1;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
self->tv->setId(*(((BPy_Id *)value)->id));
return 0;
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyGetSetDef BPy_TVertex_getseters[] = {
{(char *)"front_svertex", (getter)TVertex_front_svertex_get, (setter)TVertex_front_svertex_set,
(char *)TVertex_front_svertex_doc, NULL},
{(char *)"back_svertex", (getter)TVertex_back_svertex_get, (setter)TVertex_back_svertex_set,
(char *)TVertex_back_svertex_doc, NULL},
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{(char *)"id", (getter)TVertex_id_get, (setter)TVertex_id_set, (char *)TVertex_id_doc, NULL},
{NULL, NULL, NULL, NULL, NULL} /* Sentinel */
};
/*-----------------------BPy_TVertex type definition ------------------------------*/
PyTypeObject TVertex_Type = {
PyVarObject_HEAD_INIT(NULL, 0)
"TVertex", /* tp_name */
sizeof(BPy_TVertex), /* tp_basicsize */
0, /* tp_itemsize */
0, /* tp_dealloc */
0, /* tp_print */
0, /* tp_getattr */
0, /* tp_setattr */
0, /* tp_reserved */
0, /* tp_repr */
0, /* tp_as_number */
0, /* tp_as_sequence */
0, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
0, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
TVertex_doc, /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
0, /* tp_iter */
0, /* tp_iternext */
BPy_TVertex_methods, /* tp_methods */
0, /* tp_members */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
BPy_TVertex_getseters, /* tp_getset */
&ViewVertex_Type, /* tp_base */
0, /* tp_dict */
0, /* tp_descr_get */
0, /* tp_descr_set */
0, /* tp_dictoffset */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
(initproc)TVertex_init, /* tp_init */
0, /* tp_alloc */
0, /* tp_new */
};
///////////////////////////////////////////////////////////////////////////////////////////
#ifdef __cplusplus
}
#endif