griefith/test
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
bd57ec686c7ec00a9a01e30f32bbcfd3c21a41fb
test/source/blender/freestyle/intern/python/Interface0D/ViewVertex/BPy_TVertex.cpp

248 lines
8.3 KiB
C++
Raw Normal View History

Added GNU GPL header blocks.
2013-02-23 18:32:28 +00:00
/*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* ***** END GPL LICENSE BLOCK *****
*/
/** \file source/blender/freestyle/intern/python/Interface0D/ViewVertex/BPy_TVertex.cpp
* \ingroup freestyle
*/
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
#include "BPy_TVertex.h"
#include "../../BPy_Convert.h"
#include "../BPy_SVertex.h"
#include "../../BPy_Id.h"
#include "../../Interface1D/BPy_FEdge.h"
#include "../../Interface1D/BPy_ViewEdge.h"
#ifdef __cplusplus
extern "C" {
#endif
///////////////////////////////////////////////////////////////////////////////////////////
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
/*----------------------TVertex methods ----------------------------*/
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_doc,
Python API documentation updates: a description of class hierarchy was added to the docstrings of most Python extension types.
2010-08-12 12:17:47 +00:00
"Class hierarchy: :class:`Interface0D` > :class:`ViewVertex` > :class:`TVertex`\n"
"\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"Class to define a T vertex, i.e. an intersection between two edges.\n"
"It points towards two SVertex and four ViewEdges. Among the\n"
"ViewEdges, two are front and the other two are back. Basically a\n"
"front edge hides part of a back edge. So, among the back edges, one\n"
"is of invisibility N and the other of invisibility N+1.\n"
"\n"
".. method:: __init__()\n"
"\n"
Freestyle Python API improvements - part 5. Handling of keyword arguments in Python wrapper class constructors was revised. This revision is mainly focused on Interface0D, Interface1D, Iterator, and their subclasses, as well as a few additional view map component classes. Implementation notes: Because of the extensive use of constructor overloading in the underlying C++ classes, the corresponding Python wrappers try to parse arguments through multiple calls of PyArg_ParseTupleAndKeywords() if needed. The downside of this implementation is that most argument errors result in the same error message ("invalid argument(s)") without indicating what is wrong. For now this issue is left for future work. * Now the instantiation of ViewVertex is prohibited since the underlying C++ class is an abstract class. * Removed the .cast_to_interface0diterator() method from CurvePointIterator and StrokeVertexIterator. Instead the constructor of Interface0DIterator now accepts the instances of these two iterator classes to construct a nested Interface0DIterator instance that can be passed to Function0D functor objects. Specifically, an iterator 'it' is passed to a functor 'func' as follows: func(Interface0DIterator(it)) instead of: func(it.cast_to_interface0diterator()) * Boolean arguments of class constructors only accept values of boolean type. Input values of other types are considered as error. * Additional code clean-up was made.
2013-02-21 02:57:44 +00:00
" Default constructor.");
/* Note: No copy constructor in Python because the C++ copy constructor is 'protected'. */
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_init(BPy_TVertex *self, PyObject *args, PyObject *kwds)
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
{
Freestyle Python API improvements - part 5. Handling of keyword arguments in Python wrapper class constructors was revised. This revision is mainly focused on Interface0D, Interface1D, Iterator, and their subclasses, as well as a few additional view map component classes. Implementation notes: Because of the extensive use of constructor overloading in the underlying C++ classes, the corresponding Python wrappers try to parse arguments through multiple calls of PyArg_ParseTupleAndKeywords() if needed. The downside of this implementation is that most argument errors result in the same error message ("invalid argument(s)") without indicating what is wrong. For now this issue is left for future work. * Now the instantiation of ViewVertex is prohibited since the underlying C++ class is an abstract class. * Removed the .cast_to_interface0diterator() method from CurvePointIterator and StrokeVertexIterator. Instead the constructor of Interface0DIterator now accepts the instances of these two iterator classes to construct a nested Interface0DIterator instance that can be passed to Function0D functor objects. Specifically, an iterator 'it' is passed to a functor 'func' as follows: func(Interface0DIterator(it)) instead of: func(it.cast_to_interface0diterator()) * Boolean arguments of class constructors only accept values of boolean type. Input values of other types are considered as error. * Additional code clean-up was made.
2013-02-21 02:57:44 +00:00
static const char *kwlist[] = {NULL};
if (!PyArg_ParseTupleAndKeywords(args, kwds, "", (char **)kwlist))
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
return -1;
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
self->tv = new TVertex();
self->py_vv.vv = self->tv;
self->py_vv.py_if0D.if0D = self->tv;
SWIG/directors dependency removal (cont'd) * Added to python/BPy_Convert.{cpp,h} 4 utility converters below for better introspection-based automatic type conversion. PyObject * Any_BPy_Interface0D_from_Interface0D( Interface0D& if0D ); PyObject * Any_BPy_Interface1D_from_Interface1D( Interface1D& if1D ); PyObject * Any_BPy_FEdge_from_FEdge( FEdge& fe ); PyObject * Any_BPy_ViewVertex_from_ViewVertex( ViewVertex& vv ); There are 4 corresponding converters without the "Any_" prefix. All calls of them in the code base were replaced with these new converters so that the introspection-based automatic conversion would take place universally. * python/BPy_Convert.{cpp,h}: Those C++ to Python converters having had a "_ptr" suffix were renamed to a name without the suffix, and their arguments were changed so as to take a reference (e.g., ViewVertex&) instead of a pointer (e.g., ViewVertex *). The changed converters and their new function prototypes are listed below. These converters now return a Python wrapper object that retains the passed reference, instead of retaining a newly created C++ object by the converters. // Interface0D converters PyObject * BPy_Interface0D_from_Interface0D( Interface0D& if0D ); PyObject * BPy_CurvePoint_from_CurvePoint( CurvePoint& cp ); PyObject * BPy_StrokeVertex_from_StrokeVertex( StrokeVertex& sv ); PyObject * BPy_SVertex_from_SVertex( SVertex& sv ); PyObject * BPy_ViewVertex_from_ViewVertex( ViewVertex& vv ); PyObject * BPy_TVertex_from_TVertex( TVertex& tv ); PyObject * BPy_NonTVertex_from_NonTVertex( NonTVertex& ntv ); // Interface1D converters PyObject * BPy_Interface1D_from_Interface1D( Interface1D& if1D ); PyObject * BPy_Chain_from_Chain( Chain& c ); PyObject * BPy_FEdge_from_FEdge( FEdge& fe ); PyObject * BPy_FEdgeSharp_from_FEdgeSharp( FEdgeSharp& fes ); PyObject * BPy_FEdgeSmooth_from_FEdgeSmooth( FEdgeSmooth& fes ); PyObject * BPy_Stroke_from_Stroke( Stroke& s ); PyObject * BPy_ViewEdge_from_ViewEdge( ViewEdge& ve ); PyObject * BPy_directedViewEdge_from_directedViewEdge( ViewVertex::directedViewEdge& dve ); // some other converters PyObject * BPy_ViewShape_from_ViewShape( ViewShape& vs ); PyObject * BPy_SShape_from_SShape( SShape& ss ); PyObject * BPy_FrsMaterial_from_FrsMaterial( FrsMaterial& m ); PyObject * BPy_StrokeAttribute_from_StrokeAttribute( StrokeAttribute& sa ); * Added a "borrowed" flag to the definitions of Python types being used to wrap C++ components of Freestyle's internal data structures. The flag indicates whether or not a Python wrapper object has a reference to a C++ object that comprises the internal data structures. The deallocation routines of the Python types check this flag and release a wrapped C++ object only when it is not part of the internal data structures. The following files were modified: python/BPy_FrsMaterial.{cpp,h} python/BPy_Interface0D.{cpp,h} python/BPy_Interface1D.{cpp,h} python/BPy_SShape.{cpp,h} python/BPy_StrokeAttribute.{cpp,h} python/BPy_ViewShape.{cpp,h} python/Interface0D/BPy_CurvePoint.cpp python/Interface0D/BPy_SVertex.cpp python/Interface0D/BPy_ViewVertex.cpp python/Interface0D/CurvePoint/BPy_StrokeVertex.cpp python/Interface0D/ViewVertex/BPy_NonTVertex.cpp python/Interface0D/ViewVertex/BPy_TVertex.cpp python/Interface1D/BPy_FEdge.cpp python/Interface1D/BPy_FrsCurve.cpp python/Interface1D/BPy_Stroke.cpp python/Interface1D/BPy_ViewEdge.cpp python/Interface1D/Curve/BPy_Chain.cpp python/Interface1D/FEdge/BPy_FEdgeSharp.cpp python/Interface1D/FEdge/BPy_FEdgeSmooth.cpp * view_map/Interface[01]D.h, python/BPy_Interface[01]D.cpp: Removed from the Interface0D and Interface1D C++ classes a back pointer to a Python wrapper object and all "director" calls. These classes (and their subclasses) are used to build Freestyle's main data structures (such as a view map and strokes) and their class hierarchy is static. Python wrappers of these C++ classes are only used to access the data structures from the Python layer, and not intended to extend the data structures by subclassing the Python wrappers. Without the necessity of subclassing in the Python layer, the back pointer to a wrapping Python object and "director" calls would be useless (actually they were not used at all), so they were all removed. * python/Director.{cpp,h}: Removed the definitions of directors that were no longer used. * stroke/Stroke.{cpp,h}: Removed an (unused) back pointer to a Python wrapper object. * python/BPy_ViewMap.cpp: Fixed a possible null pointer reference. * python/Interface1D/BPy_FEdge.cpp: Fixed parameter checking in FEdge___init__().
2009-08-02 16:23:18 +00:00
self->py_vv.py_if0D.borrowed = 0;
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
return 0;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_get_svertex_doc,
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
".. method:: get_svertex(fedge)\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" Returns the SVertex (among the 2) belonging to the given FEdge.\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"\n"
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
" :arg fedge: An FEdge object.\n"
" :type fedge: :class:`FEdge`\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" :return: The SVertex belonging to the given FEdge.\n"
" :rtype: :class:`SVertex`");
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
A big code clean-up patch from Bastien Montagne, many thanks!
2013-03-07 23:17:23 +00:00
static PyObject *TVertex_get_svertex( BPy_TVertex *self, PyObject *args, PyObject *kwds)
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
static const char *kwlist[] = {"fedge", NULL};
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyObject *py_fe;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
if (!PyArg_ParseTupleAndKeywords(args, kwds, "O!", (char **)kwlist, &FEdge_Type, &py_fe))
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
return NULL;
SVertex *sv = self->tv->getSVertex(((BPy_FEdge *)py_fe)->fe);
if (sv)
return BPy_SVertex_from_SVertex(*sv);
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
Py_RETURN_NONE;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_get_mate_doc,
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
".. method:: get_mate(viewedge)\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" Returns the mate edge of the ViewEdge given as argument. If the\n"
" ViewEdge is frontEdgeA, frontEdgeB is returned. If the ViewEdge is\n"
" frontEdgeB, frontEdgeA is returned. Same for back edges.\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"\n"
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
" :arg viewedge: A ViewEdge object.\n"
" :type viewedge: :class:`ViewEdge`\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
" :return: The mate edge of the given ViewEdge.\n"
" :rtype: :class:`ViewEdge`");
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
A big code clean-up patch from Bastien Montagne, many thanks!
2013-03-07 23:17:23 +00:00
static PyObject *TVertex_get_mate( BPy_TVertex *self, PyObject *args, PyObject *kwds)
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
static const char *kwlist[] = {"viewedge", NULL};
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyObject *py_ve;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
if (!PyArg_ParseTupleAndKeywords(args, kwds, "O!", (char **)kwlist, &ViewEdge_Type, &py_ve))
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
return NULL;
ViewEdge *ve = self->tv->mate(((BPy_ViewEdge *)py_ve)->ve);
if (ve)
return BPy_ViewEdge_from_ViewEdge(*ve);
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
Py_RETURN_NONE;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyMethodDef BPy_TVertex_methods[] = {
Freestyle Python API improvements - part 8. * Proper handling of keyword arguments was implemented in Operators and ContextFunctions, as well as in methods of Interface0D, Interface1D, Iterator, their subclasses, Noise and IntegrationType. * Operators' methods and functions in the ContextFunctions module were renamed from CamelCase to lower cases + underscores. Style modules were updated accordingly. * Additional code clean-up was also made.
2013-02-24 02:39:38 +00:00
{"get_svertex", (PyCFunction)TVertex_get_svertex, METH_VARARGS | METH_KEYWORDS, TVertex_get_svertex_doc},
{"get_mate", (PyCFunction)TVertex_get_mate, METH_VARARGS | METH_KEYWORDS, TVertex_get_mate_doc},
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{NULL, NULL, 0, NULL}
};
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
/*----------------------TVertex get/setters ----------------------------*/
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_front_svertex_doc,
"The SVertex that is closer to the viewpoint.\n"
"\n"
":type: :class:`SVertex`");
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyObject *TVertex_front_svertex_get(BPy_TVertex *self, void *UNUSED(closure))
{
SVertex *v = self->tv->frontSVertex();
if (v)
return BPy_SVertex_from_SVertex(*v);
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
Py_RETURN_NONE;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_front_svertex_set(BPy_TVertex *self, PyObject *value, void *UNUSED(closure))
{
if (!BPy_SVertex_Check(value)) {
PyErr_SetString(PyExc_TypeError, "value must be an SVertex");
return -1;
}
self->tv->setFrontSVertex(((BPy_SVertex *)value)->sv);
return 0;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_back_svertex_doc,
"The SVertex that is further away from the viewpoint.\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
":type: :class:`SVertex`");
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyObject *TVertex_back_svertex_get(BPy_TVertex *self, void *UNUSED(closure))
{
SVertex *v = self->tv->backSVertex();
if (v)
return BPy_SVertex_from_SVertex(*v);
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
Py_RETURN_NONE;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_back_svertex_set(BPy_TVertex *self, PyObject *value, void *UNUSED(closure))
{
if (!BPy_SVertex_Check(value)) {
PyErr_SetString(PyExc_TypeError, "value must be an SVertex");
return -1;
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
self->tv->setBackSVertex(((BPy_SVertex *)value)->sv);
return 0;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
PyDoc_STRVAR(TVertex_id_doc,
"The Id of this TVertex.\n"
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
"\n"
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
":type: :class:`Id`");
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyObject *TVertex_id_get(BPy_TVertex *self, void *UNUSED(closure))
{
Id id(self->tv->getId());
return BPy_Id_from_Id(id); // return a copy
}
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static int TVertex_id_set(BPy_TVertex *self, PyObject *value, void *UNUSED(closure))
{
if (!BPy_Id_Check(value)) {
PyErr_SetString(PyExc_TypeError, "value must be an Id");
return -1;
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
self->tv->setId(*(((BPy_Id *)value)->id));
return 0;
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
static PyGetSetDef BPy_TVertex_getseters[] = {
A big code clean-up patch from Bastien Montagne, many thanks!
2013-03-07 23:17:23 +00:00
{(char *)"front_svertex", (getter)TVertex_front_svertex_get, (setter)TVertex_front_svertex_set,
(char *)TVertex_front_svertex_doc, NULL},
{(char *)"back_svertex", (getter)TVertex_back_svertex_get, (setter)TVertex_back_svertex_set,
(char *)TVertex_back_svertex_doc, NULL},
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
{(char *)"id", (getter)TVertex_id_get, (setter)TVertex_id_set, (char *)TVertex_id_doc, NULL},
{NULL, NULL, NULL, NULL, NULL} /* Sentinel */
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
};
/*-----------------------BPy_TVertex type definition ------------------------------*/
PyTypeObject TVertex_Type = {
PyVarObject_HEAD_INIT(NULL, 0)
"TVertex", /* tp_name */
sizeof(BPy_TVertex), /* tp_basicsize */
0, /* tp_itemsize */
0, /* tp_dealloc */
0, /* tp_print */
0, /* tp_getattr */
0, /* tp_setattr */
0, /* tp_reserved */
0, /* tp_repr */
0, /* tp_as_number */
0, /* tp_as_sequence */
0, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
0, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
TVertex_doc, /* tp_doc */
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
0, /* tp_iter */
0, /* tp_iternext */
BPy_TVertex_methods, /* tp_methods */
0, /* tp_members */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
BPy_TVertex_getseters, /* tp_getset */
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
&ViewVertex_Type, /* tp_base */
0, /* tp_dict */
0, /* tp_descr_get */
0, /* tp_descr_set */
0, /* tp_dictoffset */
Freestyle Python API improvements - part 3. Major API updates were made to address code review comments. This revision mostly focuses on Python wrappers of C++ 0D and 1D elements (i.e., Interface0D and Interface1D, as well as their subclasses). * Most getter/setter methods were reimplemented as attributes using PyGetSetDef. Vector attributes are now implemented based on mathutils callbacks. Boolean attributes now only accept boolean values. * The __getitem__ method was removed and the Sequence protocol was used instead. * The naming of methods and attributes was fixed to follow the naming conventions of the Blender Python API (i.e., lower case + underscores for methods and attributes, and CamelCase for classes). Some naming inconsistency within the Freestyle Python API was also addressed. * The Freestyle API had a number of method names including prefix/suffix "A" and "B", and their meanings were inconsistent (i.e., referring to different things depending on the classes). The names with these two letters were replaced with more straightforward names. Also some attribute names were changed so as to indicate the type of the value (e.g., FEdge.next_fedge instead of FEdge.next_edge) in line with other names explicitly indicating what the value is (e.g., SVertex.viewvertex). * In addition, some code clean-up was done in both C++ and Python. Notes: In summary, the following irregular naming changes were made through this revision (those resulting from regular changes of naming conventions are not listed): - CurvePoint: {A,B} --> {first,second}_svertex - FEdge: vertex{A,B} --> {first,second}_svertex - FEdge: {next,previous}Edge --> {next,previous}_fedge - FEdgeSharp: normal{A,B} --> normal_{right,left} - FEdgeSharp: {a,b}FaceMark --> face_mark_{right,left} - FEdgeSharp: {a,b}Material --> material_{right,left} - FEdgeSharp: {a,b}MaterialIndex --> material_index_{right,left} - FrsCurve: empty --> is_empty - FrsCurve: nSegments --> segments_size - TVertex: mate() --> get_mate() - ViewEdge: fedge{A,B} --> {first,last}_fedge - ViewEdge: setaShape, aShape --> occlude - ViewEdge: {A,B} --> {first,last}_viewvertex - ViewMap: getScene3dBBox --> scene_bbox
2013-02-14 23:48:34 +00:00
(initproc)TVertex_init, /* tp_init */
Major documentation updates. The original Freestyle API reference (http://freestyle.sourceforge.net/doc/html/index.html) has been incorporated into the Blender/Freestyle Python API implementation in the form of Sphinx-based embedded docstrings. Some C++-specific descriptions of classes and functions were revised so that they are suitable for Python programmers. Missing docstrings were filled, and sparse descriptions were extended. By means of the new documentation system for Blender, an up-to-date Freestyle Python API reference will be part of the Blender 2.5 documentation.
2010-04-17 23:47:47 +00:00
0, /* tp_alloc */
0, /* tp_new */
};
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
///////////////////////////////////////////////////////////////////////////////////////////
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
#ifdef __cplusplus
soc-mx-2008: SWIG dependency - wrapper functions extracted from ModuleWrapper.cpp
2008-07-09 08:24:13 +00:00
}
soc-2008-mxcurioni: added (but did not test) NonTVertex and TVertex classes. All Interface0D structures have been implemented
2008-07-25 21:56:06 +00:00
#endif
Reference in New Issue Copy Permalink