griefith/test
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
f43426f0de94de9aba6b7b3ca5121bfe68ab30df
test/source/blender/editors/space_image/image_intern.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

107 lines
3.3 KiB
C
Raw Normal View History

License Headers: Set copyright to "Blender Authors", add AUTHORS Listing the "Blender Foundation" as copyright holder implied the Blender Foundation holds copyright to files which may include work from many developers. While keeping copyright on headers makes sense for isolated libraries, Blender's own code may be refactored or moved between files in a way that makes the per file copyright holders less meaningful. Copyright references to the "Blender Foundation" have been replaced with "Blender Authors", with the exception of `./extern/` since these this contains libraries which are more isolated, any changed to license headers there can be handled on a case-by-case basis. Some directories in `./intern/` have also been excluded: - `./intern/cycles/` it's own `AUTHORS` file is planned. - `./intern/opensubdiv/`. An "AUTHORS" file has been added, using the chromium projects authors file as a template. Design task: #110784 Ref !110783.
2023-08-16 00:20:26 +10:00
/* SPDX-FileCopyrightText: 2008 Blender Authors
Cleanup: Add a copyright notice to files and use SPDX format A lot of files were missing copyright field in the header and the Blender Foundation contributed to them in a sense of bug fixing and general maintenance. This change makes it explicit that those files are at least partially copyrighted by the Blender Foundation. Note that this does not make it so the Blender Foundation is the only holder of the copyright in those files, and developers who do not have a signed contract with the foundation still hold the copyright as well. Another aspect of this change is using SPDX format for the header. We already used it for the license specification, and now we state it for the copyright as well, following the FAQ: https://reuse.software/faq/
2023-05-31 16:19:06 +02:00
*
* SPDX-License-Identifier: GPL-2.0-or-later */
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
doxygen: add newline after \file While \file doesn't need an argument, it can't have another doxy command after it.
2019-02-18 08:08:12 +11:00
/** \file
* \ingroup spimage
doxygen: blender/editors tagged.
2011-02-27 20:29:51 +00:00
*/
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#pragma once
2.5 Added basic code for Space Image. Now let's check if this commit has all it needed :)
2008-12-13 17:44:30 +00:00
/* internal exports only */
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
struct ARegion;
UI * Fix buttons jumping around when resizing and zoom. Part of this was adding a tiny a 0.001f offset in UI_view2d_view_ortho, otherwise the rounding is unpredictable (used to be 0.375f, but that was disabled). * Fix various issues with zooming, panning panels. V2D_LOCKOFS_X/Y is now taken into account in more places in the view2d code, to avoid zooming into the center or panning out of the view. * Remove "Free" align mode in buttons window (it's not really useful). * View3D/Graph/Image editors now use the same PanelType system as the buttons window, means some deprecated panel code could be removed. * Some small visual tweaks for panels. * View 2D Reset operator (Home key), to reset zoom and panning for panels. * Added argument to set number buttons as sliders (slider=True for itemR). * Ignore labels for button alignment (doesn't look right). * Fix some use of context.main in py scripts, should get data from active object instead. * Fix autotexspace -> auto_texspace in py script.
2009-05-19 17:13:33 +00:00
struct ARegionType;
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
struct SpaceImage;
Cleanup: sort forward declarations of enum & struct Done using: source/tools/utils_maintenance/c_sort_blocks.py
2019-01-28 21:08:24 +11:00
struct bContext;
2.5 Useful goodies: most buttons for Image window back. Not every button works! But what you can do: - press Nkey to show/hide options - use curves, with realtime updating - image properties panel, load, browsing layers, setting types - paint panel - plus new paint color picker panel! (why it wasn't there in 2.4x is probably obvious, but now it can!) Hrm... radial control should be added here too, and a nice paint size cursor?
2009-02-21 18:33:09 +00:00
struct bNodeTree;
Cleanup: sort forward declarations of enum & struct Done using: source/tools/utils_maintenance/c_sort_blocks.py
2019-01-28 21:08:24 +11:00
struct wmOperatorType;
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
Cleanup: move more editors code to c++ This moves the remaining `.c` files in the following `editors` folders to C++: `physics`, `screen`, `sound`, `space_buttons`, `space_file`, `space_graph` and `space_image`. One exception is `fsmenu.c` which has platform specific issues on macos and windows. E.g. the `Carbon/Carbon.h` include also declares a `Collection` type that collides with ours. Also see #103343. Pull Request: https://projects.blender.org/blender/blender/pulls/109918
2023-07-12 13:43:00 +02:00
#ifdef __cplusplus
extern "C" {
#endif
Cleanup: correct file names in comments after C -> C++ renaming Use back-tick quotes to differentiate these from plain text.
2023-07-31 11:50:54 +10:00
/* `space_image.cc` */
2.5 Support for listview/buttons region in ImageWindow. Now all code is in this commit :)
2009-02-21 15:31:01 +00:00
moving dir strings into global namespace for doc access (coming up)
2011-02-15 14:38:43 +00:00
extern const char *image_context_dir[]; /* doc access */
Cleanup: correct file names in comments after C -> C++ renaming Use back-tick quotes to differentiate these from plain text.
2023-07-31 11:50:54 +10:00
/* `image_draw.cc` */
Cleanup: move public doc-strings into headers for 'editors' Ref T92709
2021-12-09 00:55:11 +11:00
Use DrawManager for Image/UV Editor This project moves the current UV/Image editor drawing to the draw manager. Why would we do this: **Performance**: Current implementation would draw each texel per time. Multiple texels could be drawn per pixel what would overwrite the previous result. You can notice this when working with large textures. Repeat image drawing made this visible by drawing for a small period of time and stop drawing the rest. Now the rendering is fast and all repeated images are drawn. **Alpha drawing**: Current implementation would draw directly in display space. Giving incorrect results when displaying alpha transparent images. This addresses {T52680}, {T74709}, {T79518} The image editor now can show emission only colors. See {D8234} for examples. **Current Limitations** Using images that are larger than supported by your GPU are resized (eg larger than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is a low priority to add support back of displaying individual pixels of huge images. There is a design task {T80113} with more detail. **Implementation overview** Introduced an Image Engine in the draw module. this engine is responsible for drawing the texture in the main area of the UV/Image editor. The overlay engine has a edit_uv overlay which is responsible to draw the UV's, shadows and overlays specifically for the UV Image editor. The background + checker pattern is drawn by the overlay_background. The patch will allow us to share overlays between the 3d viewport and UV/Image editor more easily. In most cases we just need to switch the `pos` with the `u` attribute in the vertex shader. The project can be activated in the user preferences as experimental features. In a later commit this will be reversed. Reviewed By: Clément Foucault Differential Revision: https://developer.blender.org/D8234
2020-09-11 07:59:48 +02:00
void draw_image_main_helpers(const struct bContext *C, struct ARegion *region);
Cleanup: Rename ARegion variables from ar to region The old convention was easy to confuse with ScrArea. Part of https://developer.blender.org/T74432. This is mostly a batch rename with some manual fixing. Only single word variable names are changed, no prefixed/suffixed names. Brecht van Lommel and Campbell Barton both gave me a green light for this convention change. Also ran clan clang format on affected files.
2020-03-06 16:56:42 +01:00
void draw_image_cache(const struct bContext *C, struct ARegion *region);
mango request - optionally display the histogram as lines (not filled areas). - expand the enum for faster access. - keep the sample line displayed after doing the line sample (running again clears).
2012-06-10 12:09:25 +00:00
void draw_image_sample_line(struct SpaceImage *sima);
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
Cleanup: correct file names in comments after C -> C++ renaming Use back-tick quotes to differentiate these from plain text.
2023-07-31 11:50:54 +10:00
/* `image_ops.cc` */
Cleanup: move public doc-strings into headers for 'editors' Ref T92709
2021-12-09 00:55:11 +11:00
Cleanup: use bool for poll functions
2018-07-02 11:47:00 +02:00
bool space_image_main_region_poll(struct bContext *C);
Image/Clip Space: Add view center to cursor operators D5932 by @a.monti with edits
2019-10-01 20:19:44 +10:00
bool space_image_view_center_cursor_poll(struct bContext *C);
2.5: Added simple toolbox menu in image window as a test, can uses same menus as header now since code doesn't depend on being in the header anymore.
2009-01-30 12:58:00 +00:00
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
void IMAGE_OT_view_all(struct wmOperatorType *ot);
void IMAGE_OT_view_pan(struct wmOperatorType *ot);
void IMAGE_OT_view_selected(struct wmOperatorType *ot);
Image/Clip Space: Add view center to cursor operators D5932 by @a.monti with edits
2019-10-01 20:19:44 +10:00
void IMAGE_OT_view_center_cursor(struct wmOperatorType *ot);
UV Editor: Add cursor center operator This matches cursor center operator from the 3D view. Reviewed By: campbellbarton Resolves T70142 Ref D8271
2021-03-27 15:03:45 +11:00
void IMAGE_OT_view_cursor_center(struct wmOperatorType *ot);
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
void IMAGE_OT_view_zoom(struct wmOperatorType *ot);
void IMAGE_OT_view_zoom_in(struct wmOperatorType *ot);
void IMAGE_OT_view_zoom_out(struct wmOperatorType *ot);
void IMAGE_OT_view_zoom_ratio(struct wmOperatorType *ot);
Image Editor: Add border zoom Use Shift-B, UV border-select-pinned is now Ctrl-B. Patch from @rav66
2016-05-07 04:22:48 +10:00
void IMAGE_OT_view_zoom_border(struct wmOperatorType *ot);
NDOF: compile 3D mouse code only if WITH_INPUT_NDOF When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed from: - GHOST (was mostly done, finished the job) - window manager - various editors - RNA - keymaps The input tab of user prefs does not show 3D mouse settings. Key map editor does not show NDOF mappings. DNA does not change. On my Mac the compiled binary is 42KB smaller after this change. It runs fine WITH_INPUT_NDOF on or off.
2016-08-18 00:21:55 -04:00
#ifdef WITH_INPUT_NDOF
NDOF pan/zoom/fit working in image/uv editor
2011-06-25 18:51:29 +00:00
void IMAGE_OT_view_ndof(struct wmOperatorType *ot);
NDOF: compile 3D mouse code only if WITH_INPUT_NDOF When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed from: - GHOST (was mostly done, finished the job) - window manager - various editors - RNA - keymaps The input tab of user prefs does not show 3D mouse settings. Key map editor does not show NDOF mappings. DNA does not change. On my Mac the compiled binary is 42KB smaller after this change. It runs fine WITH_INPUT_NDOF on or off.
2016-08-18 00:21:55 -04:00
#endif
2.5 Added basic code for Space Image. Now let's check if this commit has all it needed :)
2008-12-13 17:44:30 +00:00
2.5: Image window operators, quite a few of these still have missing parts and are work in progress. Set 3D Cursor Set Tile Sample Color New Open Replace Reload Save (As) Save Sequence Pack Unpack Record Composite The file select operators have context issues still. They need to get the image space in the context on exec() but it's not there currently, not sure how to solve that yet. Also added name parameter to uiMenuItemEnumO, and fixed "mute" argument in ED_update_for_newframe calls in fluidsim bake.
2009-02-10 23:17:58 +00:00
void IMAGE_OT_new(struct wmOperatorType *ot);
Cleanup: move public doc-strings into headers for 'editors' Ref T92709
2021-12-09 00:55:11 +11:00
/**
* Called by other space types too.
*/
2.5: Image window operators, quite a few of these still have missing parts and are work in progress. Set 3D Cursor Set Tile Sample Color New Open Replace Reload Save (As) Save Sequence Pack Unpack Record Composite The file select operators have context issues still. They need to get the image space in the context on exec() but it's not there currently, not sure how to solve that yet. Also added name parameter to uiMenuItemEnumO, and fixed "mute" argument in ED_update_for_newframe calls in fluidsim bake.
2009-02-10 23:17:58 +00:00
void IMAGE_OT_open(struct wmOperatorType *ot);
Fix T96984: Create new image.browse operator for uiTemplateImage layouts The existing BUTTONS_OT_file_browse operator that's used for uiTemplateImage layouts fails to work correctly with UDIM textures. This is mainly due to it not realizing that it must tokenize the filepath before signaling that an update has been made. It also doesn't work correctly when executing its SHIFT-click behavior to open the image in an external application. Lastly, it doesn't set the filters to Images and Movies which is suboptimal for the user. The new operator takes the unique features of BUTTONS_OT_file_browse and creates a customized variant better suited for images. Differential Revision: https://developer.blender.org/D14824
2022-05-31 20:57:33 -07:00
void IMAGE_OT_file_browse(struct wmOperatorType *ot);
Cleanup: move public doc-strings into headers for 'editors' Ref T92709
2021-12-09 00:55:11 +11:00
/**
* Called by other space types too.
*/
Make "Match Movie Length" into an operator (must be called inside a context having either a "texture" Tex, an "area" SpaceImage, or both "edit_image" Image and "edit_image_user" ImageUser). Thanks to Campbell who pointed me to uiLayoutSetContextPointer() func!
2012-06-01 17:28:09 +00:00
void IMAGE_OT_match_movie_length(struct wmOperatorType *ot);
2.5: Image window operators, quite a few of these still have missing parts and are work in progress. Set 3D Cursor Set Tile Sample Color New Open Replace Reload Save (As) Save Sequence Pack Unpack Record Composite The file select operators have context issues still. They need to get the image space in the context on exec() but it's not there currently, not sure how to solve that yet. Also added name parameter to uiMenuItemEnumO, and fixed "mute" argument in ED_update_for_newframe calls in fluidsim bake.
2009-02-10 23:17:58 +00:00
void IMAGE_OT_replace(struct wmOperatorType *ot);
void IMAGE_OT_reload(struct wmOperatorType *ot);
void IMAGE_OT_save(struct wmOperatorType *ot);
void IMAGE_OT_save_as(struct wmOperatorType *ot);
void IMAGE_OT_save_sequence(struct wmOperatorType *ot);
Images: move save modified images operator from Python to C We will use this for saving images along with the .blend file. Ref D4861
2019-05-16 16:01:11 +02:00
void IMAGE_OT_save_all_modified(struct wmOperatorType *ot);
2.5: Image window operators, quite a few of these still have missing parts and are work in progress. Set 3D Cursor Set Tile Sample Color New Open Replace Reload Save (As) Save Sequence Pack Unpack Record Composite The file select operators have context issues still. They need to get the image space in the context on exec() but it's not there currently, not sure how to solve that yet. Also added name parameter to uiMenuItemEnumO, and fixed "mute" argument in ED_update_for_newframe calls in fluidsim bake.
2009-02-10 23:17:58 +00:00
void IMAGE_OT_pack(struct wmOperatorType *ot);
void IMAGE_OT_unpack(struct wmOperatorType *ot);
UI: Allow Clipboard Copy/Paste Images Adds operators to copy and paste to and from the OS clipboard, but only implemented for Windows. Pull Request: https://projects.blender.org/blender/blender/pulls/105833
2023-04-14 03:48:17 +02:00
void IMAGE_OT_clipboard_copy(struct wmOperatorType *ot);
void IMAGE_OT_clipboard_paste(struct wmOperatorType *ot);
2.5: Image window, some small changes: * Added notifier for edited images. * Fix main region emboss drawing when showing render. * Don't go fullscreen with fileselect for now to work around context getting lost, so open/replace works. * Save operators are more complete now, but still lack confirmation and choosing image type. * Pack operators work correctly now (but not unpack). * Setting white/black point for curves. * Time cursor for record composite.
2009-02-11 19:16:14 +00:00
Image: Flip image operator This implements an operator to flip the contents of an image buffer. It supports flipping the image horizontally and vertically. Reviewed By: JacquesLucke Differential Revision: https://developer.blender.org/D10310
2021-02-04 18:03:42 +01:00
void IMAGE_OT_flip(struct wmOperatorType *ot);
added image-editor operators: Invert Image Colors (RGB) -- Invert Red Channel Invert Green Channel Invert Blue Channel Invert Alpha Channel mostly because of the recent changes in normalmap channels, so users can adopt old bakes quickly. though they might aswell prove useful in other situations.
2011-02-23 12:02:43 +00:00
void IMAGE_OT_invert(struct wmOperatorType *ot);
Image: add resize operator Now possible with new image undo, was added for testing but seems generally useful.
2019-10-02 00:24:21 +10:00
void IMAGE_OT_resize(struct wmOperatorType *ot);
added image-editor operators: Invert Image Colors (RGB) -- Invert Red Channel Invert Green Channel Invert Blue Channel Invert Alpha Channel mostly because of the recent changes in normalmap channels, so users can adopt old bakes quickly. though they might aswell prove useful in other situations.
2011-02-23 12:02:43 +00:00
J-key render switching back, now with 10 slots. Implementation note: this was done by giving each Render a slot number, and for every slot a new Render will be created. Not sure if this is ideal, but it ensures that all passes, render info, etc are separate so you can also compare render layers and passes, in 2.4x only whatever it was currently displaying was backed up.
2010-02-09 19:37:37 +00:00
void IMAGE_OT_cycle_render_slot(struct wmOperatorType *ot);
Image: Refactor render slots to a dynamic list Previously, render slots were hardcoded to a fixed amount. With this change, render slots now are stored in a list. Therefore, users can add and/or remove as many slots as they want. Credit to brecht for the UI part. Reviewers: brecht, sergey Differential Revision: https://developer.blender.org/D3474
2018-06-14 22:46:30 +02:00
void IMAGE_OT_clear_render_slot(struct wmOperatorType *ot);
void IMAGE_OT_add_render_slot(struct wmOperatorType *ot);
void IMAGE_OT_remove_render_slot(struct wmOperatorType *ot);
J-key render switching back, now with 10 slots. Implementation note: this was done by giving each Render a slot number, and for every slot a new Render will be created. Not sure if this is ideal, but it ensures that all passes, render info, etc are separate so you can also compare render layers and passes, in 2.4x only whatever it was currently displaying was backed up.
2010-02-09 19:37:37 +00:00
2.5: Image window operators, quite a few of these still have missing parts and are work in progress. Set 3D Cursor Set Tile Sample Color New Open Replace Reload Save (As) Save Sequence Pack Unpack Record Composite The file select operators have context issues still. They need to get the image space in the context on exec() but it's not there currently, not sure how to solve that yet. Also added name parameter to uiMenuItemEnumO, and fixed "mute" argument in ED_update_for_newframe calls in fluidsim bake.
2009-02-10 23:17:58 +00:00
void IMAGE_OT_sample(struct wmOperatorType *ot);
Added a line sampler to the histogram panel in the image space. Patch #21712 from Xavier Thomas. now updates in real time as you pull the line.
2010-03-23 01:22:33 +00:00
void IMAGE_OT_sample_line(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void IMAGE_OT_curves_point_set(struct wmOperatorType *ot);
2.5: Image window operators, quite a few of these still have missing parts and are work in progress. Set 3D Cursor Set Tile Sample Color New Open Replace Reload Save (As) Save Sequence Pack Unpack Record Composite The file select operators have context issues still. They need to get the image space in the context on exec() but it's not there currently, not sure how to solve that yet. Also added name parameter to uiMenuItemEnumO, and fixed "mute" argument in ED_update_for_newframe calls in fluidsim bake.
2009-02-10 23:17:58 +00:00
Implement fame sliding from IE's cache line
2014-04-02 17:58:34 +06:00
void IMAGE_OT_change_frame(struct wmOperatorType *ot);
Rename any instance of scene layer or render layer in code with view layer The RenderResult struct still has a listbase of RenderLayer, but that's ok since this is strictly for rendering. * Subversion bump (to 2.80.2) * DNA low level doversion (renames) - only for .blend created since 2.80 started Note: We can't use DNA_struct_elem_find or get file version in init_structDNA, so we are manually iterating over the array of the SDNA elements instead. Note 2: This doversion change with renames can be reverted in a few months. But so far it's required for 2.8 files created between October 2016 and now. Reviewers: campbellbarton, sergey Differential Revision: https://developer.blender.org/D2927
2017-11-22 10:52:39 -02:00
void IMAGE_OT_read_viewlayers(struct wmOperatorType *ot);
Operator to define render border from rendered image editor This way it is possible to define render border directly from the image editor, which is useful for at least three things: - If viewport is really optimized out (simplified etc) then it might be hard to guess which exact area you're mainly interested now. - No need to switch to the viewport to do render border tweaks, could be useful when doing compositing. - If one need to look at particular pixel(s) which is real handy for debugging render engines (both Cycles and BI). Reviewers: campbellbarton, venomgfx Reviewed By: venomgfx Differential Revision: https://developer.blender.org/D820
2014-10-08 18:02:49 +02:00
void IMAGE_OT_render_border(struct wmOperatorType *ot);
void IMAGE_OT_clear_render_border(struct wmOperatorType *ot);
Add render result caching. Simply add an option to render settings to save an EXR cache, just when the render is finished. Also changed RE_ReadRenderResult() to read cache instead of temp sample files (those are fully volatile now anyway). Path to save cached render results is an UserPreferences setting. Also added 'Reload render' feature to the Image Editor (so one can now re-open a blend, and in an Image Editor hit ctrl-R to (try to) reload last render from cache). Reviewers: campbellbarton, sergey Differential Revision: https://developer.blender.org/D553
2014-06-28 19:13:54 +02:00
Add support for tiled images and the UDIM naming scheme This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender. With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser. Therefore, code that is not yet aware of tiles will just access the default tile as usual. The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9. Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator. The following features are supported so far: - Automatic detection and loading of all tiles when opening the first tile (1001) - Saving all tiles - Adding and removing tiles - Filling tiles with generated images - Drawing all tiles in the Image Editor - Viewing a tiled grid even if no image is selected - Rendering tiled images in Eevee - Rendering tiled images in Cycles (in SVM mode) - Automatically skipping loading of unused tiles in Cycles - 2D texture painting (also across tiles) - 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders) - Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID) - Different resolutions between tiles There still are some missing features that will be added later (see T72390): - Workbench engine support - Packing/Unpacking support - Baking support - Cycles OSL support - many other Blender features that rely on images Thanks to Brecht for the review and to all who tested the intermediate versions! Differential Revision: https://developer.blender.org/D3509
2019-12-12 16:06:08 +01:00
void IMAGE_OT_tile_add(struct wmOperatorType *ot);
void IMAGE_OT_tile_remove(struct wmOperatorType *ot);
void IMAGE_OT_tile_fill(struct wmOperatorType *ot);
2.5 Support for listview/buttons region in ImageWindow. Now all code is in this commit :)
2009-02-21 15:31:01 +00:00
/* image_panels.c */
Cleanup: move public doc-strings into headers for 'editors' Ref T92709
2021-12-09 00:55:11 +11:00
/**
* Gets active viewer user.
*/
2.5 Useful goodies: most buttons for Image window back. Not every button works! But what you can do: - press Nkey to show/hide options - use curves, with realtime updating - image properties panel, load, browsing layers, setting types - paint panel - plus new paint color picker panel! (why it wasn't there in 2.4x is probably obvious, but now it can!) Hrm... radial control should be added here too, and a nice paint size cursor?
2009-02-21 18:33:09 +00:00
struct ImageUser *ntree_get_active_iuser(struct bNodeTree *ntree);
UI * Fix buttons jumping around when resizing and zoom. Part of this was adding a tiny a 0.001f offset in UI_view2d_view_ortho, otherwise the rounding is unpredictable (used to be 0.375f, but that was disabled). * Fix various issues with zooming, panning panels. V2D_LOCKOFS_X/Y is now taken into account in more places in the view2d code, to avoid zooming into the center or panning out of the view. * Remove "Free" align mode in buttons window (it's not really useful). * View3D/Graph/Image editors now use the same PanelType system as the buttons window, means some deprecated panel code could be removed. * Some small visual tweaks for panels. * View 2D Reset operator (Home key), to reset zoom and panning for panels. * Added argument to set number buttons as sliders (slider=True for itemR). * Ignore labels for button alignment (doesn't look right). * Fix some use of context.main in py scripts, should get data from active object instead. * Fix autotexspace -> auto_texspace in py script.
2009-05-19 17:13:33 +00:00
void image_buttons_register(struct ARegionType *art);
Cleanup: move more editors code to c++ This moves the remaining `.c` files in the following `editors` folders to C++: `physics`, `screen`, `sound`, `space_buttons`, `space_file`, `space_graph` and `space_image`. One exception is `fsmenu.c` which has platform specific issues on macos and windows. E.g. the `Carbon/Carbon.h` include also declares a `Collection` type that collides with ours. Also see #103343. Pull Request: https://projects.blender.org/blender/blender/pulls/109918
2023-07-12 13:43:00 +02:00
#ifdef __cplusplus
}
#endif
Reference in New Issue Copy Permalink