"Camera Parent Lock" can be useful when rigging cameras, but it is not
intuitive, and has also generated a lot of confusion (bug reports).
This is because it breaks the fundamental parent <-> child relationship
conventions in Blender, and there is no indication that it's intended
without diving into the preferences.
This commit moves the setting to the object level, and exposes it in
the relations panel in the property editor. It is exposed for every
object type because any object type can be "View Locked" in the 3D view.
The property description is also updated to reflect this change and be
more specific without getting too long.
In the future this could become a more general feature of the transform
system, but for now it is limited to "Lock Camera to View".
Differential Revision: https://developer.blender.org/D9239
Fixes 18 misspellings of 'predefined', 'Look Up', 'Lookup', and 'No One'.
Differential Revision: https://developer.blender.org/D9466
Reviewed by Hans Goudey
The issue was that the volume for the current frame
might not have been loaded already by the time the
modifier runs.
The solution is simply to make sure that the volume
is loaded. This is similar to the Volume Displace modifier.
When extracting new objects from a mesh in sculpt mode, it makes sense to keep
the current symmetry options and settings in the new mesh. In previous versions symmetry
options were stored in the tool settings, so this bug was not that obvious.
This also preserves the remember settings in the new object, which is also the desired
behaviour.
Reviewed By: sergey, mont29
Differential Revision: https://developer.blender.org/D9417
Add code preserving scene's toolsettings accross undo.
IDPointers are dealt with special care, we try to keep existing ones for
some (like brushes) when possible.
Note that this covers ToolSettings, Brushes and Palettes currently.
I'm not especially happy about how this new code mixes with existing
'foreach_id' one, in particular in scene. But cannot think of a better,
more generic way to do it currently.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9311
This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
There should not be much user visible here (other than T73668 being addressed).
I added the writing code already for the initial implementation of workspaces,
but we decided to keep it disabled until the top-bar design is more clear. It
was never planned to keep this disabled for so long.
Fixes T73668.
Add a comment to the declaration of the `BKE_object_where_is_calc...()`
functions to explain where the result of the calculation is stored.
No functional changes.
This introduces a new operator to edit the detail size of constant
detail mode in dyntopo. The way this operator works and the
functionality it provides is similar to the "Voxel size edit" operator
for the voxel remesher.
It also includes a sample mode. When pressing Ctrl, the detail size
will be sampled from the surface under the cursor, updating the
preview in real time. This allows quick resolution changes without
using the operator multiple times.
The operator is set to Shift + D, replacing the old way to change
the constant detail size of dyntopo. Shift + R will remain available to
be enabled when the voxel remesher works with dyntopo. Deciding
if both detail sizes can be unified needs a separate discussion as the
new dyntopo can work with detail sizes in parts of the mesh that can
easily crash the remesher.
The structure of these operators is similar, but the data they control,
ranges, drawing and setup functions are completely different, making it
hard to merge them into one.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9355
This adds an option to orientate the trimming shape using the surface
normal instead of the view when lasso trim is used.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9231
Caused Victor.blend from the cloud to crash with ASan. Four floats are
fetched from the stack, but the buffer was only three wide.
Caused by 042143440d. Issue was probably harmless since the fourth
element wasn't actually touched.
Non-memfile undo steps never properly initialized the flag allowing to
re-use old Main data during undo/redo. This lead to doing a complete
full re-reading of data when undoing/redoing mode switches e.g.
Note that current undo system is supposed to support any kind of mode
switch across those steps, however this needs to be properly deeply
tested, so only comitting this to master. It would be way too risky for
2.91 release.
This adds support for treating multiple undo steps as a single step
from the user perspective.
This is needed for outliner mode switching and `object.switch_object`
operator which change active object and mode in a single action.
Basic support for velocity updates with the APIC method.
This commit adds APIC to the already existing dropdown menu for the simulation method. The APIC plugin within Mantaflow has been updated to the latest version.
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
This one was a bit more tricky, because the file loading is
mixed with versioning code and because collections are
embedded into scenes.
All tests that passed before, still pass.
The alpha of the first layer was always used
here since introduction in rBee4453f08369 and was not updated when
customdata support for alpha was added.
Now also use the interpolated alpha.
thx @brecht noticing!
ref T81914
Reviewers: brecht, mont29
Maniphest Tasks: T81914
Differential Revision: https://developer.blender.org/D9358
When outliner datablocks are selected, switch to the corresponding tab
for that datablock in properties editors. Only properties editors
that share an edge with the outliner will change tabs.
Additionally, when modifiers, constraints, and shader effects are
selected from the outliner, the panel will be expanded in all properties
editors.
Part of T77408
Manifest Task: https://developer.blender.org/T63991
Differential Revision: https://developer.blender.org/D8638
