struct members "gravity" and "[3]". Now it throws an error in this case,
safer than trying to fix the parsing code. Also patches the old DNA of
ClothSimSettings which had this problem .. very ugly code.
Fixes#20330: cloth sim settings getting corrupted when read from 2.49.
float (*disps)[3];
It still isn't advised to use this syntax, best to just use regular pointers,
however at least it is working better now. Previously this would lead to the
rest of the header file to be included right in the SDNA. If you look into an
existing .B25.blend file with a text editor, you can see the second half of
DNA_meshdata_types.h...
replaces another so it can do updates (e.g. dopesheet editor can
sync channel selection).
Also coded a simple optimization for allocating small objects,
based on mempools. It's #ifdef'd out, you can enabled it by
defining OPTIMIZE_SMALL_BLOCKS (e.g. adding -DDOPTIMIZE_SMALL_BLOCKS to
your compiler flags).
We suffer from a great deal of performance loss from the system allocator
(vgroups, ghash, edgehash, the singly-linked list implementation in blenlib,
editmesh, and likely a great many areas I'm forgetting), and this is the
common solution for handling the many-small-objects problem. It's not
really production-ready yet (it's long-term memory consequencers need to
be profiled first, and the implementation tweaked as necassary), but for
people on systems with slow system allocators it's worth trying.
Note that since this creates a guardedalloc<->blenlib link, the build systems
need to be updated accordingly (I've already done this for scons, though I'm
not sure if the player builds).
previously changing one rna_*.c file would rebuild them all making it slow to test small changes on the rna api.
also made errors in rna and dna generated give C defined #error's and line numbers that cause them.
* added some new variables (mostly the same as with scons):
- USE_COCOA: use Cocoa for ghost (defaults to true)
- MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture
(ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for
a different architecture, though cross compilation only works on Intel Macs, because makesdna
and makesrna are built for the target architecture.
For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC).
- MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds)
- MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific
OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds)
- MACOSX_SDK: path to a specific SDK. currently not used
- USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit
is mandatory in that case))
* use the same compiler flags as scons
* default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5
* extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might
break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip
When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit
builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults.
For current users of the Makefile system, this commit shouldn't change much.
* makesrna and makesdna now use CFLAGS, CCFLAGS and Linking flags as specified in config.
This might help with cross-compile on OSX 10.6 (32bit on 64bit). devroo & jensverwiebe, please test and report.
Not working:
a) rendering (since volumterics branch is not merged yet)
b) moving collision objects of any kind
c) saving of collision objects (because that's what I am working on)
d) pointcache
e) A bunch of other things I already know of
So please do not report any bugs on this one yet :-)
Too many new features to list! But here are the biggies:
- Boids can move on air and/or land, or climb a goal object.
- Proper interaction with collision objects.
* Closest collision object in negative z direction is considered as ground.
* Other collision objects are obstacles and boids collide with them.
- Boid behavior rules are now added to a dynamic list.
* Many new rules and many still not implemented.
* Different rule evaluation modes (fuzzy, random, average).
- Only particle systems defined by per system "boid relations" are considered for simulation of that system.
* This is in addition to the boids own system of course.
* Relations define other systems as "neutral", "friend" or "enemy".
- All effectors now effect boid physics, not boid brains.
* This allows forcing boids somewhere.
* Exception to this is new "boid" effector, which defines boid predators (positive strength) and goals (negative strength).
Known issue:
- Boid health isn't yet stored in pointcache so simulations with "fight" rule are not be read from cache properly.
- Object/Group visualization object's animation is not played in "particle time". This is definately the wanted behavior, but isn't possible with the current state of dupliobject code.
Other new features:
- Particle systems can now be named separately from particle settings.
* Default name for particle settings is now "ParticleSettings" instead of "PSys"
- Per particle system list of particle effector weights.
* Enables different effection strengths for particles from different particle systems with without messing around with effector group setting.
Other code changes:
- KDTree now supports range search as it's needed for new boids.
- "Keyed particle targets" renamed as general "particle targets", as they're needed for boids too. (this might break some files saved with new keyed particles)
Bug fixes:
- Object & group visualizations didn't work.
- Interpolating pointcache didn't do rotation.
Bad bad DNA errors! People should really check on warning prints for
compiling dna dir...
- SpaceFile: ListBase* prev; <- dna doesnt recognize this
- wmEvent: const variables were not supported yet.
The first I fixed, 2nd I added support for in makesdna.
Note that files saved between tuesday july 7 and now can be corrupted!
* removed radiosity render code, DNA and RNA (left in radio render pass options), we'll get GI to replace this probably, better allow baking to vertex colors for people who used this.
* removed deprecated solid physics library, sumo integrations and qhull, a dependency
* removed ODE, was no longer being build or supported
* remove BEOS and AMIGA defines and references in Makefiles.
EditMesh *EM_GetEditMesh(Mesh *me);
void EM_EndEditMesh(Mesh *me, EditMesh *em);
as discussed on the mailling list, this is to facilitate migration to bmesh.
next step is to merge this this to the bmesh branch. this was done in the 2.5
branch to prevent too great a divergance.
also, made makesdna/makesrna work on cygwin/msvc2008/scons.
this can be brought back as a new space if someone decides to
work on it.
This also fixes remaining issues with the outliner tree open
and close buttons not working sometimes.
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r12987:17416
Issues:
* GHOST/X11 had conflicting changes. Some code was added in 2.5, which was
later added in trunk also, but reverted partially, specifically revision
16683. I have left out this reversion in the 2.5 branch since I think it is
needed there.
http://projects.blender.org/plugins/scmsvn/viewcvs.php?view=rev&root=bf-blender&revision=16683
* Scons had various conflicting changes, I decided to go with trunk version
for everything except priorities and some library renaming.
* In creator.c, there were various fixes and fixes for fixes related to the -w
-W and -p options. In 2.5 -w and -W is not coded yet, and -p is done
differently. Since this is changed so much, and I don't think those fixes
would be needed in 2.5, I've left them out.
* Also in creator.c: there was code for a python bugfix where the screen was not
initialized when running with -P. The code that initializes the screen there
I had to disable, that can't work in 2.5 anymore but left it commented as a
reminder.
Further I had to disable some new function calls. using src/ and python/, as
was done already in this branch, disabled function calls:
* bpath.c: error reporting
* BME_conversions.c: editmesh conversion functions.
* SHD_dynamic: disabled almost completely, there is no python/.
* KX_PythonInit.cpp and Ketsji/ build files: Mathutils is not there, disabled.
* text.c: clipboard copy call.
* object.c: OB_SUPPORT_MATERIAL.
* DerivedMesh.c and subsurf_ccg, stipple_quarttone.
Still to be done:
* Go over files and functions that were moved to a different location but could
still use changes that were done in trunk.
* merge the recent scons changes from trunk, so this means that the same rules now apply:
- scons-local available
- platform default configs updated
- check your user-config.py if you have made a full copy of default config
Note: BGE and blenderplayer still not working, but that is normal ;) (so turn them off!)
This is the first code for the Data API, also known as RNA system in the
2.5 Branch. It does not include a user interface, and only wraps some
Scene properties for testing. It is integrated with Scons and Makefiles,
and compiles a 'makesrna' program that generates an RNA.c file.
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataAPIhttp://wiki.blender.org/index.php/BlenderDev/Blender2.5/RNA
The changes are quite local, basically adding a makesrna module which
works similar to the makesdna module. The one external change is in
moving genfile.c from blenloader to the makesdna module, so that it can
be reused by the RNA code. This also meant changing the DNA makefiles.
It seems to be doing dependencies correct still in my tests, but if
there is an issue with the DNA not being rebuilt this commit might be
the one causing it. Also it seems for scons the makesdna and makesrna
modules are compiling without warnings. Not a new issue but this should
be fixed.
The RNA code supports all types as defined in the Data API design, so
in that sense it is fairly complete and I hope that aspect will not
have to change much. Some obviously missing parts are context related
code, notify() functions for updates and user defined / ID properties.
