Using varargs had the disadvantages, replace with a macro which has
some advantages.
- Arguments are type checked.
- Less verbose.
- Unintended NULL arguments would silently terminate joining paths.
- Passing in a NULL argument warns with GCC.
Blender is using more and more temporary Main data-base (historically
for reading linked data, but also now when resyncing liboverrides, for
temp data in asset code, etc.).
This commit aims at making this a bit more formal and defined, by:
* Adding a dedicated flag in Main struct to mark a Main as global.
* Adding some API to replace, or temporarily swap the current global
Main (`G_MAIN`) by another one.
NOTE: Having to temporarily replace `G_MAIN` is a workaround for the
limitation of current RNA, ideally this should be fixed in RNA itself,
but for now at least having an API helps tracking those cases (since
this is potentially risky operation).
This work is also a preparation for more usages of temp mains in the near
future (Asset Brushes and its presets system e.g. will most likely use
temp mains too).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15977
Saving non app-template preferences would use add-ons and other
app-template settings to write the default preferences if there was no
existing user preferences file saved.
Suppress warning when saving app-template preferences.
Check if the preferences exist before attempting to read them,
while harmless it looked as if something went wrong.
- Document the behavior of app-template IO for preferences.
- Add doxy-sections for each kind of blend file IO.
- Clarify BKE_blender_userdef_app_template_data_swap doc-string.
handle_subversion_warning() was reporting with RPT_ERROR type, replaced
with RPT_WARNING.
RPT_ERROR would stop python scripts opening files written by newer
Blender binary with bpy.ops.wm.open_mainfile(), preventing further code
from running. This does not seem right since Blender itself still loads
the files.
Ran into this checking T100446 in 2.93.
Differential Revision: https://developer.blender.org/D15712
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
Use "filepath" which is the current convention for naming full paths.
- Main use "name" which isn't obviously a file path.
- BlendFileData & FileGlobal used "filename" which is often
used for the name component of a path (without the directory).
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
This commit also add an experimental userPreferences to prevent proxies
conversions on file load, and reporting for amount of coverted proxies
(and possible issues).
Note that potentially linked proxies from other libraries are not
hamdled here (this feature seems to be broken anyway in master
currently?).
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
The new Asset Browser-based pose library is partially implemented in an
add-on. This commit enables the add-on by default, as the old pose
library was built-in and thus always enabled.
The ability to disable the add-on is there mostly for cases where
people/studios want to use their own custom pose library.
This reverts commit rB3a48147b8ab92, and fixes the issues with linking
etc.
Change compared to previous buggy commit (rBf8d219dfd4c31) is that
new `BlendFileReadReports` reports are now passed to the lowest level
function generating the `FileData` (`filedata_new()`), which ensures
(and asserts) that all code using it does have a valid non-NULL pointer
to a `BlendFileReadReport` data.
Sorry for the noise, it's always when you think a change is trivial and
do not test it well enough that you end up doing those kind of
mistakes...
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
Add direct user feedback (as a warning report) to user when recursive
resync of overrides was needed.
And some timing (as CLOG logs) about main readfile process steps.
This is essentially adding a new BlendFileReadReport structure that wraps
BKE_reports list, and adds some extra info (some timing, some info about
overrides and (recursive) resync, etc.).
We do not want to re-generate auto-overrides until everything that
needed to be resynced has been resynced. Otherwise it's a waste of time
and guaranteed loss of some override properties.
Mistake in rB9947f2095610 earlier today.
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
The Asset Browser is still considered an experimental feature right now. But it
can be enabled by default for alpha builds, to get further testing and
feedback. It will hopefully be a non-experimental feature by the end of bcon1.
This is done in agreement with Dalai.
One of the core design aspects of the Asset Browser is that users can "mount"
custom asset libraries via the Preferences. Currently an asset library is just
a directory with one or more .blend files in it. We could easily support a
single .blend file as asset library as well (rather than a directory). It's
just disabled currently.
Note that in earlier designs, asset libraries were called repositories.
Idea is simple: In Preferences > File Paths, you can create custom libraries,
by setting a name and selecting a path. The name is ensured to be unique. If
the name or path are empty, the Asset Browser will not show it in the list of
available asset libraries.
The library path is not checked for validity, the Asset Browser will allow
selecting invalid libraries, but show a message instead of the file list, to
help the user understand what's going on.
Of course the actual Asset Browser UI is not part of this commit, it's in one
of the following ones.
{F9497950}
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9722
Reviewed by: Brecht Van Lommel, Hans Goudey
When blend files were loaded with app-templates,
setup_app_data was running before defaults were updated.
This is likely to cause problems with order of initialization
so always update the startup file beforehand.
This removes G_FILE_HISTORY, G_FILE_SAVE_COPY & G_FILE_USERPREFS.
Using file-flags made logic harder to follow since it's not so clear
which flags are expected to be in G.fileflags & which are meant to be
set and passed as arguments, these are shared between read & write
functions too.
Add BlendFileWriteParams so options which don't need to be stored
aren't mixed up with flags that are stored for reuse.
When "Relative Remap" option was added, the intention was only to remap
paths that were already relative. However it remapped all paths.
This was reported as T62612 and fixed recently,
however some Python script authors depended on the old behavior.
For users, it's reasonable to use the existing operators to make paths
absolute/relative. For scripts however it's useful to be able to write
out individual data-blocks with the ability to make all paths relative.
Now `bpy.data.libraries.write()` takes a path_remap argument which can
be `NONE/RELATIVE/RELATIVE_ALL/ABSOLUTE` allowing the script author to
choose how paths are handled when writing out data-blocks.
Addresses T77768.
The file subversion is no longer used in the Python API or user interface,
and is now internal to Blender.
User interface, Python API and file I/O metadata now use more consistent
formatting for version numbers. Official releases use "2.83.0", "2.83.1",
and releases under development use "2.90.0 Alpha", "2.90.0 Beta".
Some Python add-ons may need to lower the Blender version in bl_info to
(2, 83, 0) or (2, 90, 0) if they used a subversion number higher than 0.
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Python_API#Compatibility
This change is in preparation of LTS releases, and also brings us more
in line with semantic versioning.
Fixes T76058.
Differential Revision: https://developer.blender.org/D7748
