Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d. This aligns better with
existing naming where the shorter names are much more common.
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
We store various lazily calculated caches on meshes, some of which
depend on the vertex positions staying the same. The current API to
invalidate these caches is a bit confusing. With an explicit set of
functions modeled after the functions in `BKE_node_tree_update.h`,
it becomes clear which function to call. This may become more
important if more lazy caches are added in the future.
Differential Revision: https://developer.blender.org/D14760
Caused by {rB6a3c3c77b3eb}.
Displacement and wave were tagging the original mesh normals dirty,
instead the result's normals need tagging. Seems like a typo in above
commit (similar to rBfe43c170831f).
Maniphest Tasks: T98727
Differential Revision: https://developer.blender.org/D15165
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
Also fixes missing code to read/write/free/copy color management settings
in various places. This can't be set through the UI currently, but still
should be handled consistently.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
Particle copying code was already properly sharing pointcache between
orig data and its copy only when `LIB_ID_COPY_SET_COPIED_ON_WRITE` is
set, do the same for the other point cache users.
Using `LIB_ID_CREATE_NO_MAIN` here is waaaaaaay to much wide scope for
such a dangerous/advanced behavior, that kind of things has to be
strictly restricted in scope.
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
Mistake in {rBe48c4d73d378}.
Was using the vertex index as a lookup for the loop color (instead of
the loop index).
(Issue was not present in original D1429 btw).
Maniphest Tasks: T88145
Differential Revision: https://developer.blender.org/D11212
Most fields have Affect Location and Rotation options that switch
off their effect, but they are only checked as the last step after
the force is already computed. It is more efficient to check it
when building the list of field objects, just like zero weight.
It is also possible to check the strength-related fields for 0.
As an aside, this adds Location to Texture fields (they don't
handle rotation) and both Location & Rotation checkboxes to
Fluid Flow. Boid and Curve Guide remain without options for
now as they are completely different from others.
Differential Revision: https://developer.blender.org/D10087
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
