These functions are almost identical, the main difference being
BLI_join_dirfile didn't trim existing slashes when joining paths
however this isn't an important difference that warrants a separate
function.
Using the attribute name semantics from T97452, this patch moves the
selection status of mesh elements from the `SELECT` of vertices, and
edges, and the `ME_FACE_SEL` of faces to generic boolean attribute
Storing this data as generic attributes can significantly simplify and
improve code, as described in T95965.
The attributes are called `.select_vert`, `.select_edge`, and
`.select_poly`. The `.` prefix means they are "UI attributes",so they
still contain original data edited by users, but they aren't meant to
be accessed procedurally by the user in arbitrary situations. They are
also be hidden in the spreadsheet and the attribute list.
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when selection is used. When the flags are removed
completely, requirements will decrease.
Further notes:
* The `MVert` flag is empty at runtime now, so it can be ignored.
* `BMesh` is unchanged, otherwise the change would be much larger.
* Many tests have slightly different results, since the selection
attribute uses more generic propagation. Previously you couldn't
really rely on edit mode selections being propagated procedurally.
Now it mostly works as expected.
Similar to 2480b55f21
Ref T95965
Differential Revision: https://developer.blender.org/D15795
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
This is already the case for most CMake usage.
Although some find modules are an exception to this, as they were
originally maintained externally they use some different conventions.
Also corrected bad indentation in: intern/cycles/CMakeLists.txt
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
We now import and apply custom normals using a similar strategy
to the STL importer. We store custom normal data for each loop
as we read each MPoly and then apply it to the mesh after
`BKE_mesh_calc_edges()` is called.
The new behavior is optional and may be disabled in the Collada import
UI. When disabled, we use the old behavior of only using normals
to determine whether or not to smooth shade an MPoly.
----
Patch as requested in {T49814}.
The Collada import UI now has an additional checkbox, similar to the glTF and FBX import UIs:
{F13428264}
Here is a test Collada file with a simple test cube with flipped custom normals:
{F13428260}
{F13428282}
And a sphere where the two halves are disconnected geometry, but has custom normals that make the halves appear to be connected:
{F13436363}
{F13436368}
I've tested it on a number of my own meshes, and the custom normals appear to be imported
correctly. I'm not too sure about how I've plumbed the option down, though, or whether this
is the most proper way to apply custom normals.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D15804
As described in T95966, the goal is to move to a "struct of arrays"
approach rather than gathering an arbitrary set of data in hard-coded
structs. This has performance benefits, but also code complexity
benefits (this patch removes plenty of code, though the boilerplate
for the new operators outweighs that here).
To mirror the internal change, the options for storing mesh bevel
weights are converted into operators that add or remove the layer,
like for some other layers.
The most complex change is to the solidify modifier, where bevel
weights had special handling. Other than that, most changes are
removing clearing of the weights, boilerplate for the add/remove
operators, and removing the manual transfer of bevel weights
in bmesh - mesh conversion.
Eventually bevel weights can become a fully generic attribute,
but for now this patch aims to avoid most functional changes.
Bevel weights are still written and read from the mesh in the old way,
so neither forward nor backward compatibility are affected. As described
in T95965, writing in the old format will be done until 4.0.
Differential Revision: https://developer.blender.org/D14077
Replace `mesh_attributes`, `mesh_attributes_for_write` and the point
cloud versions with methods on the `Mesh` and `PointCloud` types.
This makes them friendlier to use and improves readability.
Differential Revision: https://developer.blender.org/D15907
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d. This aligns better with
existing naming where the shorter names are much more common.
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
Add a dedicated `owner_id` pointer to ID types that can be embedded
(Collections and NodeTrees), and modify slightly come code to make
handling those more safe and consistent.
This implements first part of T69169.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15838
Fixes issues in importers written in C++ (T100737):
- Materials had one reference count too much. Affected Collada,
Alembic, USD, OBJ importers, looks like "since forever".
- Active material index was not properly set on imported meshes.
Regression since 3.3 (D15145). Affected Alembic, USD, OBJ. Note:
now it sets the first material as the active one, whereas
previously the last one was set as active. First one sounds more
"intuitive" to me.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15831
This patch moves material indices from the mesh `MPoly` struct to a
generic integer attribute. The builtin material index was already
exposed in geometry nodes, but this makes it a "proper" attribute
accessible with Python and visible in the "Attributes" panel.
The goals of the refactor are code simplification and memory and
performance improvements, mainly because the attribute doesn't have
to be stored and processed if there are no materials. However, until
4.0, material indices will still be read and written in the old
format, meaning there may be a temporary increase in memory usage.
Further notes:
* Completely removing the `MPoly.mat_nr` after 4.0 may require
changes to DNA or introducing a new `MPoly` type.
* Geometry nodes regression tests didn't look at material indices,
so the change reveals a bug in the realize instances node that I fixed.
* Access to material indices from the RNA `MeshPolygon` type is slower
with this patch. The `material_index` attribute can be used instead.
* Cycles is changed to read from the attribute instead.
* BMesh isn't changed in this patch. Theoretically it could be though,
to save 2 bytes per face when less than two materials are used.
* Eventually we could use a 16 bit integer attribute type instead.
Ref T95967
Differential Revision: https://developer.blender.org/D15675
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
Rename and refactor several F-curve key manipulation functions, and move
them from `editors` to `blenkernel`.
The functions formerly known as `delete_fcurve_key`,
`delete_fcurve_keys`, and `clear_fcurve_keys` have been moved from
`ED_keyframes_edit.h` to `BKE_fcurve.h` and have been renamed according
to hierarchical naming rules.
Below is a table of the naming changes.
| From | To |
| -- | -- |
| `delete_fcurve_key(fcu, index, do_recalc)` | `BKE_fcurve_delete_key(fcu, index)` |
| `delete_fcurve_keys(fcu)` | `BKE_fcurve_delete_keys_selected(fcu)` |
| `clear_fcurve_keys(fcu)` | `BKE_fcurve_delete_keys_all(fcu)` |
| `calchandles_fcurve()` | `BKE_fcurve_handles_recalc()` |
| `calchandles_fcurve_ex()`| `BKE_fcurve_handles_recalc_ex()` |
The function formerly known as `delete_fcurve_key` no longer takes a
`do_fast` parameter, which determined whether or not to call
`calchandles_fcurve`. Now, the responsibility is on the caller to run
the new `BKE_fcurve_handles_recalc` function if they have want to
recalculate the handles.
In addition, there is now a new static private function called
`fcurve_bezt_free` which sets the key count to zero and frees the key
array. This function is now used in couple of instances of functionally
equivalent code. Note that `BKE_fcurve_delete_keys_all` is just a
wrapper around `fcurve_bezt_free`.
This change was initially spurred by the fact that `delete_fcurve_keys`
was improperly named; this was a good opportunity to fix the location
and naming of a few of these functions.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15282
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
Many thanks to the original Author of this patch: Christian Aguilera
The COLLADA importer was silently ignoring the alpha component in the
vertex data.
The `stride` variable holds the component count (3 for RGB; 4 for RGBA),
and can be used for honouring the alpha channel in the vertex data.
Test plan:
- Open Blender.
- Clear the scene.
- Add a plane.
- Enter **Vertex Paint** mode.
- Switch to the **Erase Alpha** blending mode.
- Select a tone of gray.
- Turn strength down to less than 1
- Paint [some of] the vertices of the plane.
- Export project as a COLLADA file (`.dae`).
- Clear the scene.
- Re-import the COLLADA file again.
- Export the project again (with different name).
**Without** this patch, the second exported project will have lost the
alpha component in their vertex data:
```lang=xml, counterexample
<float_array id="Plane-mesh-colors-Col-array" count="24">1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1</float_array>
```
**With** the patch, the first and the second exported projects retain
the alpha values painted previously:
```lang=xml
<float_array id="Plane-mesh-colors-Col-array" count="24">1 1 1 1 1 1 1 0.5490196 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.5490196</float_array>
```
Reviewed By: cristian64, SonnyCampbell_Unity
Authored by: Christian Aguilera
Differential Revision: https://developer.blender.org/D14246
Some I/O code paths (Collada, OBJ) were using mat3_from_axis_conversion
followed by transpose_m3, instead of swapping the axis arguments
which achieves exactly the same result.
Reviewed By: Aras Pranckevicius
Differential Revision: https://developer.blender.org/D15158
Instead of directly accessing constraint-specific callbacks
in code all over blender, introduce two wrappers to retrieve
and free the target list.
This incidentally revealed a place within the Collada exporter
in BCAnimationSampler.cpp that didn't clean up after retrieving
the targets, resulting in a small memory leak. Fixing this should
be the only functional change in this commit.
This was split off from D9732.
Differential Revision: https://developer.blender.org/D13844
Knowing when layers are retrieved for write access will be essential
when adding proper copy-on-write support. This commit makes that
clearer by adding `const` where the retrieved data is not modified.
Ref T95842
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
A mistake in the mesh normal refactor caused the wrong mesh to
be used when calculating normals with a shape key's deformation.
This commit fixes the normal calculation by using the correct mesh,
with just adjusted vertex positions, and calculating the results
directly into the result arrays when possible. This completely avoids
the need to make a local copy of the mesh, which makes sense,
since the only thing that changes is the vertex positions.
Differential Revision: https://developer.blender.org/D14317
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
Also fixes missing code to read/write/free/copy color management settings
in various places. This can't be set through the UI currently, but still
should be handled consistently.
I noticed that there were a few variables that should not be visible per default.
It seems to me to simply be an oversight, so I went ahead and cleaned them up.
Reviewed By: Sybren, Ray molenkamp
Differential Revision: http://developer.blender.org/D14132
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
