* The wording on the "Add Constraint" dropdown has been changed so that there is
no ambiguitiy about which tab is currently selected. That is, it now mentions
whether these are object or bone constraints, so that users don't need to try
and look up at the header to check.
* Show the warning about Ob vs Bone constraints when in armature editmode too.
to brush size, and unlock icon to indicate absolute jitter untied to
brush size, in screen pixels. Also relative jitter now has soft UI limit
of 2.0 and a hard limit of 1000 times the size of the brush. Should be
enough for the most vivid imaginations...I hope!
absolute coordinates. This allows an artist to lower the brush radius
while keeping the spread of the brush constant. A toggle under the
jitter slider provides the option to switch between relative/absolute.
Fix for keyingsets tips, and make them (and a few others) findable by i18n messages extracting code (for some reasons, their bl_rna.description are void???).
- add accent_grave.
- strip the search string.
- add numpad numbers (currently these match regular numbers).
also remove unneeded forward declarations in path_util.c
pressure spacing across all paint systems (was supported only for
texture painting earlier). Also, switch paint code to use the new code
path from now on. No shift-Lclick required anymore.
- click-drag adds a ruler if there are none.
- pressing enter stores the ruler for re-use when activating again (saves as a grease-pencil layer).
- add to toolbar.
This adds border option to compositor, which affects on
a backdrop and viewer nodes, which is useful for faster
previews and tweaks.
Final compositing still happens for the whole frame, but
if it'll be needed it's not so difficult to support it
as well.
To use border there's Ctrl-B shortcut in the compositor
editor, which i used to define region you want to restrict
compositing to. There's also "Viewer Border" option in
the N-panel in case you'll want to disable border
compositing.
Some areas could be cleaned a bit, like ideally it shall
not be viewer image clearing in viewer_border_update RNA
callback, but currently it's not so much clear how to
make it the same fast as simple memset and glue it
somehow to compositor. Will think of nicer solution a
bit later.
Adding new file paint_image_proj.c which includes the projective texture painting part of texture
painting, using the stroke system. To access the new code path use Shift-LClick.
The new code path still is problematic with tablet pressure and I will be looking
into ways to unify this across paint systems next.
The old code is still present and can be accessed by regular Lclick as usual.
Also removed 3D (non-projective) painting from 3D viewport.
TODO:
* Add pressure influence code to stroke, remove from every other paint
system code, including texpaint.
* Put UnifiedPaintSettings update in PaintStroke code.
F-Curves/Animation as well as Drivers
This is useful for tracking down invalid F-Curves which might need to have their
paths fixed, or perhaps to remove F-Curves for controls which no longer exist in
a new rig.
modes, so we can show degrees rather than radians. Still refers to the same
DNA variable to keep backwards compatibility.
Patch #33807 by Gottfried Hofmann.
a Use Alpha option again. This makes the case where you enabled Premultiply on the
image and disabled Use Alpha on the texture work again.
That's mostly useful when you have a straight alpha image file which has no useful
RGB colors in zero alpha regions (e.g. renders). Then sometimes you don't want to
use the alpha for the texture stack mixing, but you still want to multiply it into
the RGB channels to avoid a blocky transition into zero alpha regions.
This also removes the version patch that copied image datablocks because it's not
reliable and might be causing bug #34434. This does mean we are no longer backwards
compatible for cases where two different texture datablocks with Use Alpha enabled
and disabled where using the same image.
* Some alignment fixes for Fluid Buttons in the "Fluid" panel.
* Tweaked Fluid Particle buttons a bit, no need to have redundant "Particle" name inside the "Fluid Particles" panel.
- optional, select between name/keybinding.
- when key input can't be parsed, alert red to give the user some feedback.
- key shortcut parsing could be improved or swapped out for button which grabs shortcut.
Several major things are done in this commit:
- First of all, logic of modal solver was changed.
We do not rely on only minimizer to take care of
guessing rotation for frame, but we're using
analytical rotation computation for point clouds
to obtain initial rotation.
Then this rotation is being refined using Ceres
minimizer and now instead of minimizing average
distance between points of point of two clouds,
minimization of reprojection error of point
cloud onto frame happens.
This gives quite a bit of precision improvement.
- Second bigger improvement here is using bundle
adjustment for a result of first step when we're
only estimating rotation between neighbor images
and reprojecting markers.
This averages error across the image sequence
avoiding error accumulation. Also, this will
tweak bundles themselves a bit for better match.
- And last bigger improvement here is support of
camera intrinsics refirenment.
This allowed to significantly improve solution
for real-life footage and results after such
refining are much more usable than it were before.
Thanks to Keir for the help and code review.
Most notable difference from now on will be that all py is handled from current blender's resource dirs, no more from source dir. Better for consistency, and avoid e.g. cycles' addon to be checked twice...
Main purpose of this is to be more compatible with older
versions of blender (before alpha cleanup) where sequencer
used to display premultiplied image on an straight opengl
viewport.
Now sequencer preview would behave closer to image editor
However adding Alpha and R|G|B displays is not so simple
because sequencer is using 2D textures. Would be nice to
implement this options as well, but this is not so much
important IMO.
This hall fix
- #34453: VSE: Subtract function does not work properly
TODO: Make RGBA display default for our startup.blend
in fact the keymap editor was missing other keymaps so added these too,
also updated keymap checker to make sure there is no mismatch with region/space types.
Notes:
* Everything is still a bit raw and sometimes hackish.
* Not every feature implemented yet.
* A bunch of cleanup is still needed.
* Doc needs to be updated too!
It's implemented as a separate constraint instead of adding properties
to the existing constraints.
Motors only apply linear and angular impulses and don't limit the
movement of rigid bodies, so it's best to use them in conjunction with
other constraints to limit the degrees of freedom.
Thanks to Markus Kasten (markus111) for the initial patch.
Dragging on toggle buttons can now be used to press multiple buttons at once, especially useful for layer and outliner buttons.
notes:
- automatically enabled for all toggle buttons
(may change this if it becomes a problem).
- only buttons of the same type are pressed
(helps avoid annoyances eg; dragging past layer buttons onto other 3d header buttons and pressing by accident).
- automatic axis locking - dragging will lock to X/Y depending on the initial drag direction,
makes swipe motions work better, especially with the outliner.
implementation details:
- may re-implement as a region handler (currently its a modal operator).
- checking buttons in-between cursor motion events could be more efficient (but currently works ok).
- button execution needs to be improved
(currently executing a button thats not under the mouse needed a workaround for passing uiHandleButtonData),
requires further changes to UI code, will do next.
notes:
- vertices with zero weights are considered the same as vertices outside of a group.
- currently these show black but this can be made a theme color.
- multi-paint overrides this option (noted in description)
This commit introduces operators to customise the grouping of F-Curves. As
groups are only available in Actions, these grouping operators only work in the
Dopesheet, Action Editor, and Graph Editor (Animation) modes.
To Use:
* Ctrl-G = Group selected F-Curves
* Alt-G = Ungroup selected F-Curves
* or find these tools from the Channels menu
Notes:
* When invoking the grouping operator from the Channels menu, the name popup
won't show up. Instead, the group(s) created will be created with the default
name. To fix, you can either use the F6 operator properties edit OR manually
edit the names (Ctrl-LMB on the relevant channel)
Rename it to "Dynamic" to make it more obvious that it switches between
static and dynamic state.
Also don't show it for passive rigid bodies since it's redundant in that
case.
Now modifier takes a segments parameter.
Bevel edge weights will multiply the overall amount.
For vertex-only, you can give a vertex group name,
and the weights in that will multiply the overall amount.
