The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
There was one functional issue with the previous API which was its
use in `VolumeGrid<T>::grid_for_write(tree_token)`. The issue was
that the tree token had to be received before the grid is accessed.
However, this `grid_for_write` method might create a copy of the
`VolumeGridData` internally and if it does, the passed in `tree_token`
corresponds to the wrong tree.
The solution is to output the token as part of the method. This has two
additional benefits:
* The API is more safe, because one can't pass an r-value into the methods
anymore. This generally shouldn't be done, because the token should
live at least as long as the OpenVDB tree is used and shouldn't be freed
immediatly.
* The API is a bit simpler, because it's not necessary to call the
`VolumeGrid.tree_access_token()` method anymore.
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Caused by 2a1ac6145a
If the attribute creation failed, the modifier would try to fill in a
null UV map. The combination of CustomData and attribute API functions
was a bit confusing, so restore the old behavior more explicitly using
just the attribute API (including the slightly weird "Float2" default
name. That could be changed later.)
Some common headers were including this. Separating the includes
will ideally lead to better conceptual separation between CustomData
and the attribute API too. Mostly the change is adding the file to
places where it was included indirectly before. But some code is
shuffled around to hopefully better places as well.
This builds on top of f824476bd5 to show
panels in the geometry nodes modifier. It also changes the two existing panels
to use the new layout panels.
The open-close state of the panels is stored in the modifier itself. It contains a
mapping from panel id to the corresponding state flag.
Pull Request: https://projects.blender.org/blender/blender/pulls/116472
Except for vertex groups and a few older color types, these
are generally replaced by newer generic attribute types.
Also remove some includes of DNA_mesh_types.h, since it's
included indirectly by BKE_mesh.hh currently.
Each value is now out of the global namespace, so they can be shorter
and easier to read. Most of this commit just adds the necessary casting
and namespace specification. `enum class` can be forward declared since
it has a specified size. We will make use of that in the next commit.
This refactors how volume grids are stored with the following new goals in mind:
* Get a **stand-alone volume grid** data structure that can be used by geometry nodes.
Previously, the `VolumeGrid` data structure was tightly coupled with the `Volume` data block.
* Support **implicit sharing of grids and trees**. Previously, it was possible to share data
when multiple `Volume` data blocks loaded grids from the same `.vdb` files but this was
not flexible enough.
* Get a safe API for **lazy-loading and unloading** of grids without requiring explicit calls
to some "load" function all the time.
* Get a safe API for **caching grids from files** that is not coupled to the `Volume` data block.
* Get a **tiered API** for different levels of `openvdb` involvement:
* No `OpenVDB`: Since `WITH_OPENVDB` is optional, it's helpful to have parts of the API that
still work in this case. This makes it possible to write high level code for volumes that does
not require `#ifdef WITH_OPENVDB` checks everywhere. This is in `BKE_volume_grid_fwd.hh`.
* Shallow `OpenVDB`: Code using this API requires `WITH_OPENVDB` checks. However, care
is taken to not include the expensive parts of `OpenVDB` and to use forward declarations as
much as possible. This is in `BKE_volume_grid.hh` and uses `openvdb_fwd.hh`.
* "Full" `OpenVDB`: This API requires more heavy `OpenVDB` includes. Fortunately, it turned
out to be not necessary for the common API. So this is only used for task specific APIs.
At the core of the new API is the `VolumeGridData` type. It's a wrapper around an
`openvdb::Grid` and adds some features on top like implicit sharing, lazy-loading and unloading.
Then there are `GVolumeGrid` and `VolumeGrid` which are containers for a volume grid.
Semantically, each `VolumeGrid` has its own independent grid, but this is cheap due to implicit
sharing. At highest level we currently have the `Volume` data-block which contains a list of
`VolumeGrid`.
```mermaid
flowchart LR
Volume --> VolumeGrid --> VolumeGridData --> openvdb::Grid
```
The loading of `.vdb` files is abstracted away behind the volume file cache API. This API makes
it easy to load and reuse entire files and individual grids from disk. It also supports caching
simplify levels for grids on disk.
An important new concept are the "tree access tokens". Whenever some code wants to work
with an openvdb tree, it has to retrieve an access token from the corresponding `VolumeGridData`.
This access token has to be kept alive for as long as the code works with the grid data. The same
token is valid for read and write access. The purpose of these access tokens is to make it possible
to detect when some code is currently working with the openvdb tree. This allows freeing it if it's
possible to reload it later on (e.g. from disk). It's possible to free a tree that is referenced by
multiple owners, but only no one is actively working with. In some sense, this is similar to the
existing `ImageUser` concept.
The most important new files to read are `BKE_volume_grid.hh` and `BKE_volume_grid_file_cache.hh`.
Most other changes are updates to existing code to use the new API.
Pull Request: https://projects.blender.org/blender/blender/pulls/116315
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
Make the naming consistent with the recent change from "loop" to
"corner". Avoid the need for a special type for these triangles by
conveying the semantics in the naming instead.
- `looptris` -> `corner_tris`
- `lt` -> `tri` (or `corner_tri` when there is less context)
- `looptri_index` -> `tri_index` (or `corner_tri_index`)
- `lt->tri[0]` -> `tri[0]`
- `Span<MLoopTri>` -> `Span<int3>`
- `looptri_faces` -> `tri_faces` (or `corner_tri_faces`)
If we followed the naming pattern of "corner_verts" and "edge_verts"
exactly, we'd probably use "tri_corners" instead. But that sounds much
worse and less intuitive to me.
I've found that by using standard vector types for this sort of data,
the commonalities with other areas become much clearer, and code ends
up being naturally more data oriented. Besides that, the consistency
is nice, and we get to mostly remove use of `DNA_meshdata_types.h`.
Pull Request: https://projects.blender.org/blender/blender/pulls/116238
This adds a new `Bake` node which allows saving and loading intermediate geometries.
Typical use cases we want address with this currently are:
* Bake some data for use with a render engine.
* Bake parts of the node tree explicitly for better performance.
For now, the format that is written to disk is not considered to be an import/export format.
It's not guaranteed that data written with one Blender version can be read by another
Blender version. For that it's better to use proper interchange formats. Better support for
those will be added eventually as well. We also plan an `Import Bake` node that allows
reading the blender-specific baked data independent of the Bake node and at different frames.
The baking works very similar to the baking in the simulation zone (UI and implementation
wise). Major differences are:
* The Bake node has a `Bake Still` and `Bake Animation` mode.
* The Bake node doesn't do automatic caching.
Implementation details:
* Refactored how we create the Python operators for moving socket items so that it also
makes sense for non-zones.
* The `ModifierCache` stores an independent map of `SimulationNodeCache` and
`BakeNodeCache`, but both share a common data structure for the actually baked data.
* For baking, the `Bake` node is added as a side-effect-node in the modifier. This will make
sure that the node is baked even if it's currently not connected to the output.
* Had to add a new `DEG_id_tag_update_for_side_effect_request` function that is used
during baking. It's necessary because I want to evaluate the object again even though none
of its inputs changed. The reevaluation is necessary to create the baked data. Using
`DEG_id_tag_update` technically works as well, but has the problem that it also uses the
`DEG_UPDATE_SOURCE_USER_EDIT` flag which (rightly) invalidates simulation caches
which shouldn't happen here.
* Slightly refactored the timeline drawing so that it can also show the baked ranges of
Bake nodes. It does not show anything for baked nodes with a in Still mode though.
* The bake operator is refactored to bake a list of `NodeBakeRequest` which makes the
code easier to follow compared to the previous nested
`ObjectBakeData > ModifierBakeData > NodeBakeData` data structure.
* The bake operators are disabled when the .blend file is not yet saved. This is technically
only necessary when the bake path depends on the .blend file path but seems ok to force
the user anyway (otherwise the bake path may be lost as well if it's set explicitly).
* The same operators are used to bake and delete single bakes in `Bake` nodes and
`Simulation Zones`. On top of that, there are separate operators of baking and deleting all
simulation bakes (those ignore bake nodes).
* The `Bake` node remembers which inputs have been fields and thus may be baked as attributes.
For that it uses an `Is Attribute` flag on the socket item. This is needed because the baked data
may still contain attribute data, even if the inputs to the bake node are disconnected.
* Similar to simulation zones, the behavior of `Bake` nodes is passed into the geometry nodes
evaluation from the outside (from the modifier only currently). This is done by providing the
new `GeoNodesBakeParams` in `GeoNodesCallData` when executing geometry nodes.
Next Steps (mostly because they also involve simulations):
* Visualize nodes that have not been evaluated in the last evaluation.
* Fix issue with seemingly loosing baked data after undo.
* Improve error handling when baked data is not found.
* Show bake node in link drag search.
* Higher level tools for managing bakes.
Pull Request: https://projects.blender.org/blender/blender/pulls/115466
The term `looptri` was used ambiguously for both single & arrays.
The term `tri` was also used, causing `tri->tri`.
Use terms:
- `looptris` for an array or when dealing with multiple items.
- `looptri` is used when dealing with a single item.
- `lt` for a single MLoopTri variables & arguments.
This was already a convention but not followed closely.
This gives better asserts in debug builds through use of Span, more
safety when name convention attributes happen to have different types
or domains, and simpler code in some cases. But the main reasoning is to
avoid relying on the specifics of CustomData more to allow us to replace
it in the future.
This adds a new "Active Camera" input geometry node, per #105761.
The node outputs the the scene's current active camera. It is available
from Input > Scene > Active Camera in the geometry nodes Add menu.
Typical usage would be to connect this node to an Object Info node to
obtain its transform. This works as expected when the camera's
transform is animated, and also when there are markers on the timeline
that change the active camera.
In order to support the aforementioned changes in the active camera,
this implementation adds depsgraph relations for all cameras referenced
by timeline markers. This eliminates the complexity of updating the
depsgraph whenever the scene switches to a different active camera,
but of course it comes at the cost of including more objects than
strictly necessary in the depsgraph for scenes that switch cameras.
Dynamically updating the depsgraph upon camera changes could be a
future improvement if there proves to be sufficient need for it.
Pull Request: https://projects.blender.org/blender/blender/pulls/113431
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
Due to changes in the build environment shader_builder wasn't able to
compile on macOs. This patch reverts several recent changes to CMake files.
* dbb2844ed9
* 94817f64b9
* 1b6cd937ff
The idea is that in the near future shader_builder will run on the buildbot as
part of any regular build to ensure that changes to the CMake doesn't break
shader_builder and we only detect it after a few days.
Pull Request: https://projects.blender.org/blender/blender/pulls/115929
For context, see 6d09fa3577. Overall, these values were still
written in some cases, but never used. Nowadays the viewer node and
attribute overlays give even better answers to these needs.
Automatic memory management and clearer ownership! Requires
removing `MEM_CXX_CLASS_ALLOC_FUNCS` from `MeshRuntime`,
but that's used very inconsistently anyway, and `MeshRuntime` isn't
that large.
Exposed by 383a145a19.
Think the issue actually started in cfa53e0fbe, since then the new
destination normals were only filled from the first array copy onwards
(probably hidden by some recalculation of normals somewhere?).
In any case, starting the destination normals array with what we have
from the input mesh normals and then resizing the array (instead of
reinitializing it from scratch) fixes this.
Pull Request: https://projects.blender.org/blender/blender/pulls/115612
This avoids some duplication between the modifier and operator evaluation
contexts and also makes it easier to make independent from a specific
evaluation context (so e.g. the simulation nodes code shouldn't care whether
it's used from a modifier or operator.
Pull Request: https://projects.blender.org/blender/blender/pulls/115512
Inlining the functions is simpler nowadays, since there are utility
functions to copy spans and tag the mesh caches dirty. Also use an
array instead of a raw pointer for multires.
Resolves#103789
