color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
This experimental preference was not making much difference with
selection set to left-mouse for the 3D view and UV editor. Now dragging
the existing selection is possible when this preference is enabled.
Remove much of the old legacy pose library:
- Remove from the Pose & Armature menus.
- Remove from the default keymap.
- Pose Library panel in Armature properties: Add "(legacy)" to title.
- Add note that the functionality of that panel is obsolete, with a
button that opens the manual on the chapter of the new pose library.
- Add button to convert the selected legacy pose library to pose assets.
- The rest of the functionality is greyed out to further communicate
it's been deprecated. It's still functional, though.
Ref: T93405
Add edge panning feature to transform operator. It works in same way as
in node editor, but Y axis is limited by usable range up to 128
channels.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14310
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
While it's useful for click-drag to leave the selection as-is
(when clicking on items that are already selected), it's useful
for a single click to de-select all other elements.
This also removes the need for the initial selection to set the object
as active since this is possible by clicking on it.
This was already as a preference for the tweak tool,
this preference enables the option for all selection
in the 3D view & UV editor.
This extends on changes from T96544.
- Follow the same conventions as the 3D viewport for UV selection
(using SelectPick_Params internally).
- Use WM_operator_properties_mouse_select for selection properties.
Support for differentiating the tweak tool from the 3D cursor when
select is set to RMB.
This is currently an experimental preference:
Tweak Tool: Left Mouse Select & Drag
When enabled the tweak tool can now tweak the existing selection
without de-selecting first, a single click can be used to replace
the selection.
This matches selection in the graph & node editors.
This preferences is only available with "Developer Extras" enabled.
Ref T96544.
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
Using press to activate the Tweak tool doesn't work well when used a
fallback tool as the drag event is often used by the current tool -
making it impossible not to select when dragging (unless the fallback
tool is disabled entirely).
Resolve this by using CLICK events when the Tweak tool is used as a
fallback.
Even though this avoids the crash, check for null-pointer de-reference
since changes to the key-map shouldn't cause operators to crash.
Note that the ability for operators to access a gizmo before it's fully
initialized is a more general problem that should be addressed, but out
of scope for a bug-fix.
Reviewed By: zeddb, JulienKaspar, Severin
Maniphest Tasks: T95591
Ref D14231
This patch adds edge selection support for UV editing (refer T76545).
Developed as a part of GSoC 2021 project - UV Editor Improvements.
Previously, selections in the UV editor always flushed down to vertices
and this caused multiple issues such as T76343, T78757 and T26676.
This patch fixes that by adding edge selection support for all UV
operators and adding support for flushing selections between vertices
and edges. Updating UV select modes is now done using a separate
operator, which also handles select mode flushing and undo for UV
select modes. Drawing edges (in UV edge mode) is also updated to match
the edit-mesh display in the 3D viewport.
Notes on technical changes made with this patch:
* MLOOPUV_EDGESEL flag is restored (was removed in rB9fa29fe7652a).
* Support for flushing selection between vertices and edges.
* Restored the BMLoopUV.select_edge boolean in the Python API.
* New operator to update UV select modes and flushing.
* UV select mode is now part of editmesh undo.
TODOs added with this patch:
* Edge support for shortest path operator (currently uses vertex path logic).
* Change default theme color instead of reducing contrast with edge-select.
* Proper UV element selections for Reveal Hidden operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12028
Supporting two kinds of dragging is redundant, remove tweak events as
they only supported 3 mouse buttons and added complexity from using the
'value' to store directions.
Support only click-drag events (KM_CLICK_DRAG) which can be used with
any keyboard or mouse button.
Details:
- A "direction" member has been added to keymap items and events which
can be used when the event value is set to KM_CLICK_DRAG.
- Keymap items are version patched.
- Loading older key-maps are also updated.
- Currently the key-maps stored in ./release/scripts/presets/keyconfig/
still reference tweak events & need updating. For now they are updated
on load.
Note that in general this wont impact add-ons as modal operators don't
receive tweak events.
Reviewed By: brecht
Ref D14214
When RMB-select uses "Select Tweak" as a fallback tool,
ignore all bindings mapped to the Control key as these are
used for path selection.
This was fixed in 2a2d873124
however that caused shift-select to fail (T93100).
This adds the boilerplate code that is necessary to use the tool/brush/paint
systems in the new sculpt curves mode.
Two temporary dummy tools are part of this patch. They do nothing and
only serve to test the boilerplate. When the first actual tool is added,
those dummy tools will be removed.
Differential Revision: https://developer.blender.org/D14117
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
c9d9bfa84a caused a regression in when
the right-mouse select action was set to "Select & Tweak" (default).
Now the fallback tool works with RMB select as it did before.
When the select action was set to "Select Tool", shift-clicking
on sequence strips wasn't selecting the strip.
Regression in 2a2d873124
Thanks to @a.monti for the fix.
In rBdcdbaf89bd11, I introduced a new operator
(`file.asset_library_refresh()`) to handle Asset Browser refreshing more
separate from File Browser refreshing. However, there already was
`asset.asset_list_refresh()`, which at this point only works for asset
view templates, but was intended to cover the Asset Browser case in
future too. This would happen once the Asset Browser uses the asset list
design of the asset view template.
So rather than having two operators for refreshing asset library data,
have one that just handles both cases, until they converge into one.
This avoids changes to the Python API in future (deprecating/changing
operators).
Differential Revision: https://developer.blender.org/D13239
In rBdcdbaf89bd11, I introduced a new operator
(`file.asset_library_refresh()`) to handle Asset Browser refreshing more
separate from File Browser refreshing. However, there already was
`asset.asset_list_refresh()`, which at this point only works for asset
view templates, but was intended to cover the Asset Browser case in
future too. This would happen once the Asset Browser uses the asset list
design of the asset view template.
So rather than having two operators for refreshing asset library data,
have one that just handles both cases, until they converge into one.
This avoids changes to the Python API in future (deprecating/changing
operators).
Differential Revision: https://developer.blender.org/D13239
