Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
Check for multiple faces that use the same vertices. The implementation
uses a a Map with a Set of vertex pointers, so is not necessarily fast,
but this is just a debug check anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/113899
This replaces the older dynamic c arrays with blender::Vector as
appropriate. Many files required minimal changes and the before/after
are quite similar.
There's 3 remaining usages of the old machinery but those will require
more involved changes and design.
See #103343
Pull Request: https://projects.blender.org/blender/blender/pulls/110981
The hash tables and vector blenlib headers were pulling many more
headers than they actually need, including the C base math header,
our C string API header, and the StringRef header. All of this
potentially slows down compilation and polutes autocomplete
with unrelated information.
Also remove the `ListBase` constructor for `Vector`. It wasn't used
much, and making it easy to use `ListBase` isn't worth it for the
same reasons mentioned above.
It turns out a lot of files depended on indirect includes of
`BLI_string.h` and `BLI_listbase.h`, so those are fixed here.
Pull Request: https://projects.blender.org/blender/blender/pulls/111801
The `EdgeHash` and `EdgeSet` data structures are designed specifically
as a hash of an order agnostic pair of integers. This specialization can
be achieved much more easily with the templated C++ data structures,
which gives improved performance, readability, and type safety.
This PR removes the older data structures and replaces their use with
`Map`, `Set`, or `VectorSet` depending on the situation. The changes
are mostly straightforward, but there are a few places where the old
API made the goals of the code confusing.
The last time these removed data structures were significantly changed,
they were already moving closer to the implementation of the newer
C++ data structures (aa63a87d37).
Pull Request: https://projects.blender.org/blender/blender/pulls/111391
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
The file bmesh_opdefines.c was recently converted to bmesh_opdefines.cc,
but the manual builder was not updated accordingly.
Also, update some comments in the code which were still mentioning the C
version of this file.
Pull Request: https://projects.blender.org/blender/blender/pulls/110532
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
It is possible to organize shape keys into a tree through the
reference key setting. Mesh editing and sculpting a reference
key is supposed to update all its children, but this was only
done for one level of dependencies.
This changes the code to retrieve the complete set of dependent
keys and update them all.
ebe8f8ce71 and 5669c5a61b added multithreading but
a typo meant it wasn't used for half of the process. Fixing that gives a
30% improvement in my tests, from about 80 to 60 ms converting a grid.
First we copied the entire BMesh custom data layout to the Mesh, then we
decided not to copy some boolean layers like UV pinning if every value
was false. But that left the layers uninitialized. Instead, copy the
custom data layout _after_ finding which layers to skip.
Replace `typedef struct X {} X;` with `struct X {};`
In some cases the first and last name didn't match although this
is rarely useful, even a typo in some cases, e.g. TrachPathPoint.
Face maps were added as a prototype of a new rigging solution during
2.8 development. Their storage is redundant with the newer generic
attribute system (specifically with integer face attributes), and
they were never used much. This commit removes the face map list
and converts the storage to an attribute with the name `face_maps`.
There is nowhere to store the face map names anymore, so those
are not kept.
It probably still makes sense to have a feature like mesh face gizmo
selection for rigging. But the design and implementation woulds likely
have to change significantly, including possibly changing the storage
type, and making use of the generic attribute system instead of a
special type.
See #105317 for more discussion.
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
