- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
rB33c5e7bcd5e5b79 doversion code was incorrectly dealing with 'insert in
first position' case from older blendfiles.
Specifically, a NULL anchor is valid (it means that the new item is the
first of the stored override data, and should be inserted at start of
the list).
Reported as part of T93321.
Original implementation was a quick prototype which should have never
landed as-is in master. It had very limiting constraints and did not
allow for any real further development.
This commit fixes the internal implementation to make more sensible,
maintainable and evolutive.
NOTE: This commit introduces another forward-incompatibility in the
Blender file format: Files saved after this commit won't open properly
in older versions of blender regarding local inserted constraints or
modifiers into overrides of linked data.
NOTE: Technical details: The 'anchor' item name/index is now stored in
`subitem_reference_` members, and the actual 'source' item name/index is
stored in `subitem_local_` members of the override property operation
data.
Previously, only the `subitem_local_` members were used, storing the
anchor item name/index, and assuming the 'source' item was always the
next in the list.
Milestone I of T82160.
Maniphest Tasks: T82160
Differential Revision: https://developer.blender.org/D13282
Offsets for meta strip were invalid. No steps to reproduce the issue are
available, but it is quite possible that there are files with incorrect
state after issues with meta strips were fixed.
Ensure correct offsets for meta strips in versioning code.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13257
Now with Geometry Nodes in Blender,
trees can become much bigger than before.
This changes the minimum zoom value in the node editor.
Differential Revision: https://developer.blender.org/D13254
The Cycles accurate mode was removed, but the Eevee option for this has
a different meaning and should not have been removed. The Eevee accurate
makes cryptomatte accumulate for every sample, which Cycles has always
done regardless of any option.
This change was introduced in 997b5fe45d, to not display pixelated
thumbnails. However when VSE timeline height is made smaller, this
limits strip height.
Change limit, so one strip can occupy full height of VSE timeline
There were two issues:
- The third math node socket does not exist in old enough files.
- The comment incorrectly referred to the vector math node.
Differential Revision: https://developer.blender.org/D13219
This reverts commit 6b4ca78108.
A simpler fix was used for 3.0, but rBd845ba481c6d2ef already contained
a more complete solution to the problem of inconsistent socket ids.
Previously, unique identifiers for sockets were created automatically,
sometimes using .001 and sometimes _001. Now they are created
manually with the second format, but some files were saved with .001
format. I think this was only an issue in the vector math node.
rBd845ba481c6d fixed this problem in 3.1, but in a more general way.
After I merge this patch to 3.1, I will revert it, since the versioning
added in that commit will make this redundant.
Differential Revision: https://developer.blender.org/D13209
Previously both `.` and `_` were used as separators when finding
a unique name for a socket. This removes the use of `.`, since `_`
was more common. It also does versioning for all of a file's node
trees to make sure that they all use the `_` convention.
Differential Revision: https://developer.blender.org/D13181
First this was wrong for files written in 2.93 read into blender in 3.0
after the CyclesX merge.
Then this was fixed by versioning in rB6321dd3d4007.
But this caused files written in 3.0 to have this versioning applied as
well (leading to socket shifting).
Now only do the versioning for files created before the CyclesX
merge.
Maniphest Tasks: T92979
Differential Revision: https://developer.blender.org/D13173
Followup to e65230f0c0.
Pablo and I decided it's fine to reset themes again when saved with the
recent 3.1 builds.
This needed to be done a bit careful, since a normal version patch
resetting the theme would've reset the theme for anybody opening
preferences of a 3.0 build (even the final release build) in a 3.1
build. So make sure the theme is at least from a 3.1 build (but not
newer then this commit of course).
This comment is from the block at the end of the versioning functions,
where we have an unversioned block to collect versioning code that
doesn't require immediate version bumping. The comment was probably just
copied over with the code when bumping the version eventually.
The version patch for 0cf9794c7e was checking and setting a data name
using the macros for translation. These would access the current
preferences which can mismatch the ones currently being version patched.
See discussion in 0cf9794c7e for details.
Don't handle translation in this version patch, which is more of a
"nice-to-have" version patch, no functionality depends on it.
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
CyclesX introduced two new input sockets for the Principled BSDF node in
rB08031197250a. This change is now handled in the versioning code so that
Animation data targeting those sockets are now updated.
Files created with the last Blender release (2.93) or earlier are now
correctly versioned. Files created with 3.0 alpha/beta may need to be
manually updated.
When node input sockets are animated, they target the socket by index.
As a result, animation data needs to be updated whenever new sockets are
added (except when they're added at the end of the list). The code for
this is now extracted into its own versioning function, so that it can
be used for other versioning steps as well.
No functional changes.
{F11548100, size=full}
To celebrate the beginning of a new series, it feels like the right time to
give the theme a fresh look while improving on what already works.
The aim of this refresh is to keep a familiar look but with polishing touches
here and there. Like new paint on the walls of your well known house.
The theme for Blender 2.8 was well received but presented a few flaws.
* Transparency on menus and tooltips reduce readability
* Mismatch on certain colors, especially outlines of connected widgets
* Active/open menus highlight was not prominent enough
* Header background mismatch in some editors
At the same time we can make use of new features in 3.0:
* Make panels look like panels again (like in v2.3!)
* Make use of roundness in more widgets
* Since nodes are no longer hard-coded to be transparent, tweak opacity and saturation
* Tweak colors for the new dot grid
This update does not include:
* Meshes in edit mode to match greenish object-data color. This needs tweaks in the code to improve contrast.
* A copy of the Blender 2.8x legacy theme. This could be added to the community themes (shouldn't cost much maintenance, I hope)
There will be certainly small tweaks to do here and there, I've been working using this theme
for months but there can be areas that are missing update. The overall style is presented here.
This commit bumps the file subversion.
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13008
Subdivision surface: Both geometry sockets renamed to "Mesh"
Points to Volume: Use "Points" and "Volume" names
Distribute Points on Faces: Use "Mesh" input name
These are meant to provide a hint to users which type each
node is meant to use.
Feedback was that "Default" is a bit of a weird name, so switching it to "User
Library". Added versioning code which won't be entirely bullet proof (e.g. will
also rename libraries named "Default" by the user), but it doesn't have to be.
Addresses T90298.
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
This patch makes the background grid of the node editor a grid of dots
instead of lines. This makes the background look a bit more subtle and
reduces visual complexity. The dots are meant to provide a reference
when panning and zooming. Based on the design of @pablovazquez, and
a patch originally authored by @fabian_schempp.
The "Grid Levels" controls how many levels of dots are drawn. As the
editor zooms in, the higher levels of dots fade in, making them closer
together visually. The zoom factor at which each grid starts and ends
fading in is controllable in the code, and could be tweaked further
in the future. The new default value is 7, out of a range from 0 to 9.
Differential Revision: https://developer.blender.org/D10345
