This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
The refactoring of texture handles did not take into account that render
services are shared between multiple render session. Now the texture
to handle map is also shared between render sessions.
These are the internal changes to Cycles, for Blender integration there are no
functional changes in this commit.
Images are converted to scene linear color space on file load, and on reading
from the OpenImageIO texture cache. 8-bit images are compressed with the sRGB
transfer function to avoid precision loss while keeping memory usages low. This
also means that for common cases of 8-bit sRGB images no conversion happens at
all on image loading.
Initial patch by Lukas, completed by Brecht.
Differential Revision: https://developer.blender.org/D3491
This adds our own OSL texture handle, that has info for OIIO textures or our
own custom texture types. A filename to handle hash map is used for lookups.
This is efficient because it happens at OSL compile time, because the optimizer
can figure out constant strings and replace them with texture handles.
This patch adds support for IES files, a file format that is commonly used to store the directional intensity distribution of light sources.
The new IES node is supposed to be plugged into the Strength input of the Emission node of the lamp.
Since people generating IES files do not really seem to care about the standard, the parser is flexible enough to accept all test files I have tried.
Some common weirdnesses are distributing values over multiple lines that should go into one line, using commas instead of spaces as delimiters and adding various useless stuff at the end of the file.
The user interface of the node is similar to the script node, the user can either select an internal Text or load a file.
Internally, IES files are handled similar to Image textures: They are stored in slots by the LightManager and each unique IES is assigned to one slot.
The local coordinate system of the lamp is used, so that the direction of the light can be changed. For UI reasons, it's usually best to add an area light,
rotate it and then change its type, since especially the point light does not immediately show its local coordinate system in the viewport.
Reviewers: #cycles, dingto, sergey, brecht
Reviewed By: #cycles, dingto, brecht
Subscribers: OgDEV, crazyrobinhood, secundar, cardboard, pisuke, intrah, swerner, micah_denn, harvester, gottfried, disnel, campbellbarton, duarteframos, Lapineige, brecht, juicyfruit, dingto, marek, rickyblender, bliblubli, lockal, sergey
Differential Revision: https://developer.blender.org/D1543
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
The issue was than nodes dependencies were stored as set<ShaderNode*> which
is actually a so called "strict weak ordered", meaning order of nodes in
the set is strictly defined, but based on the ShaderNode pointer. This means
that between different render invokations order of original nodes could be
different due to different pointers allocated for ShaderNode.
This commit makes it so dependencies and maps used for ShaderNodes are based
on the node->id which has much more predictable order. It's still possible
to trick the system by doing some crazy edits during viewport rendfer and
cause difference between viewport and final render stacks.
Reviewers: brecht
Reviewed By: brecht
Subscribers: LazyDodo
Differential Revision: https://developer.blender.org/D1630
Basically we can not use sharp closure as a substitude when filter glossy is
used. This is because we can not blur sharp reflection/refraction.
This is quite quick and not really clean implementation. Not really happy
with manual handling of original settings, but this is as good as we can do
in the quick patch. It's a good acknowledgment and we now can re-consider
some aspects of graph simplification to make such cases more natively
supported.
P.S. This failure would have been shown by our regression tests, so please,
bother a bit to run Cycles's test sweep before doing such optimizations.
and preview running at the same time.
It seems there's something in OSL/LLVM that's not thread safe, but I couldn't
figure out what exactly. Now all renders share the same OSL ShadingSystem which
should avoid the problem.
well as I would like, but it works, just add a subsurface scattering node and
you can use it like any other BSDF.
It is using fully raytraced sampling compatible with progressive rendering
and other more advanced rendering algorithms we might used in the future, and
it uses no extra memory so it's suitable for complex scenes.
Disadvantage is that it can be quite noisy and slow. Two limitations that will
be solved are that it does not work with bump mapping yet, and that the falloff
function used is a simple cubic function, it's not using the real BSSRDF
falloff function yet.
The node has a color input, along with a scattering radius for each RGB color
channel along with an overall scale factor for the radii.
There is also no GPU support yet, will test if I can get that working later.
Node Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Shaders#BSSRDF
Implementation notes:
http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles/Subsurface_Scattering
operator< had wrong brackets, changed it now to be more clear.
Fix#33404: crash GPU rendering with OSL option still enabled. There was a check
to disable OSL in this case, but it shouldn't have modified scene->params because
this is used for comparison in scene->modified().
Also some simple OSL optimization, passing thread data pointer directly instead
of via thread local storage, and creating ustrings for attribute lookup.
Documentation here:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/OSLhttp://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.65/Cycles
These changes require an OSL build from this repository:
https://github.com/DingTo/OpenShadingLanguage
The lib/ OSL has not been updated yet, so you might want to keep OSL disabled
until that is done.
Still todo:
* Auto update for external .osl files not working currently, press update manually
* Node could indicate better when a refresh is needed
* Attributes like UV or generated coordinates may be missing when requested from
an OSL shader, need a way to request them to be loaded by cycles
* Expose string, enum and other non-socket parameters
* Scons build support
Thanks to Thomas, Lukas and Dalai for the implementation.
The sampled color ramp data is passed to OSL as a color array. This has to be done as actual float[3] array though, since the Cycles float3 type actually contains 4 floats, leading to shifting color components in the array.
Additional parameter set functions for arrays have been added to the Cycles OSL interface for this purpose.
