This PR introduces the ability for users to switch between boolean
solvers while using the sculpt *Trim* tools (*Box Trim* & *Lasso Trim*)
much like the mesh boolean modifier and geometry node. Because the
*Exact* solver has performance issues with larger meshes, the *Fast*
solver is set to be the default.
In my very rough timing tests on my laptop on a mesh with **1.7m**
vertices, a *Trim* operation with the *Fast* solver finishes in roughly
20 seconds as opposed to still being in progress after five minutes
with the *Exact* solver.
Addresses part of #84229
Pull Request: https://projects.blender.org/blender/blender/pulls/119699
This adds a new exprimental option to automatically convert GP legacy
data to GPv3 one.
It supports also linking and appending cases. Conversion also happens
when opening a file linking GP legacy data saved by an older .blendfile.
Pull Request: https://projects.blender.org/blender/blender/pulls/118705
The Volume input of the world didn't show up inside the property panel.
Reason was that the panel didn't have EEVEE-Next inside its list of compatible
engines.
Pull Request: https://projects.blender.org/blender/blender/pulls/119729
Smooth transparent shadows by jittering their opacity threshold every
sample.
Always enabled on final renders, optionally enabled in the viewport with
`scene.eevee.shadow_jittered_transparency`.
Pull Request: https://projects.blender.org/blender/blender/pulls/119480
Allow the user to scale shadow-map resolution per-light.
Adapt the PCF scale based on shadow-map to pixel footprint ratio,
since we can no longer assume that higher LODs don't need filtering.
This allows using much lower shadow resolutions, which can yield
quite significant performance improvements, with relatively little
perceptual quality loss (at the cost of softening shadow edges).
The per-light resolution scale is a literal scale, so for example 0.5
means half the resolution. The Scene Simplify Shadows setting has
been updated to match this behavior.
Pull Request: https://projects.blender.org/blender/blender/pulls/119436
This uses Spherical Harmonics to store the indirect lighting and
distant lighting visibility.
We can then reuse this information for each closure which divide
the cost of it by 2 or 3 in many cases, doing the scanning once.
The storage cost is higher than previous method, so we split the
resolution scaling to be independant of raytracing.
The spatial filtering has been split to its own pass for performance
reason. Upsampling now only uses 4 bilinearly interpolated samples
(instead of 9) using bilateral weights to avoid bleeding.
This also add a missing dot product (which soften the lighting
around corners) and fixes the blocky artifacts seen at lower
resolution.
Pull Request: https://projects.blender.org/blender/blender/pulls/118924
A tone mapper designed specifically for PBR color accuracy, to get sRGB
colors in the output render that match as faithfully as possible the input
sRGB baseColor under gray-scale lighting. This is aimed toward product
photography use cases, where the scene is well-exposed and HDR color values
are mostly restricted to small specular highlights.
Fixes#118824: Proposal: add a view transform for Khronos PBR Neutral Tone Mapper
Co-authored-by: Emmett Lalish <elalish@google.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/118936
Experimental flag for "Extensions Development Utilities" that can be
enabled separately from "Extensions". Note this PR does not enable the
use of this flag (coming later) as uses are in addons-contrib. This
flag is requested in #119521
Pull Request: https://projects.blender.org/blender/blender/pulls/119562
With default sizes the Timeline "Playback" popover clips the text of
two items in English. This PR just makes it just wide enough plus a
bit of breathing room.
Pull Request: https://projects.blender.org/blender/blender/pulls/119474
Layer masks were partly already there. This PR completes the implementation and expose them through the UI.
This also adds three operators to:
- add a layer mask
- remove a layer mask
- reorder layer masks
Note: These are not used by the renderer yet. Will be done in a following PR.
Pull Request: https://projects.blender.org/blender/blender/pulls/119433
This adds the `viewlayername` property to grease pencil v3 layers.
It's exposed as `viewlayer_render` in python.
Note: this is not used in the renderer yet. Will be used in a following PR.
Pull Request: https://projects.blender.org/blender/blender/pulls/119422
Changes:
- Add Vert Slide and Edge Slide to 'UV -> Transform' menu.
- Add a separator for Vert Slide and Edge Slide in the context menu.
- Don't display the "Correct UVs" option in the Redo menu of UV Editor.
EEVEE-Next performes less on integrated GPUs then discrete GPUs.
Most shaders have been analyzed, but there will always be bottlenecks
related to architectural differences.
In order to make EEVEE-Next run smooth on integrated GPUs this change
will implement viewport pixel size option similar to Cycles. The main difference
is that the samples will still be weighted and up-sampled to the final film
resolution. This makes the pixels not look squared in the viewport but will
resolve to something close to the results without up-scaling.
This improves the performance especially on integrated GPUs. The improvement
for discrete GPUs are less noticeable. See here the stats when playing
`rain_restaurant.blend` back on a RAPHAEL_MENDOCINO iGPU.
| Pixel size | Frames per second |
|------------|-------------------|
| 1x | 0.25 FPS |
| 2x | 4.14 FPS |
| 4x | 6.90 FPS |
| 8x | 9.95 FPS |
Related to: #114597
See PR for some example images.
Pull Request: https://projects.blender.org/blender/blender/pulls/118903
We recently added a new "Internet" icon, meant to represent internet
services and protocols generally, in contrast with the existing "url"
icon which can be seen as being http (web link) specifically. This
PR just uses this icon for cloud storage uses and for remote extension
repository.
Pull Request: https://projects.blender.org/blender/blender/pulls/119409
The core of the issue was that `sculpt_flag` was used by three different enums (`eGP_Sculpt_Flag`, `eGP_Sculpt_Mode_Flag`, and `eBrushFlags`). This resulted in the flag getting overriden because `ENUM_OPERATORS` expected the maximum value of `eGP_Sculpt_Flag` to be `(1 << 3)` which it wasn't.
The `sculpt_flag` was exposed through python as `"direction"`.
In the UI this meant that it was effectively used as `brush.direction`. This fix replaces `brush.gpencil_settings.direction` with `brush.direction`.
It also makes sure `sculpt_flag` is only ever used with values from `eGP_Sculpt_Flag`.
Pull Request: https://projects.blender.org/blender/blender/pulls/119373
This commit adds the `SCULPT_OT_hide_show_lasso_gesture` and the
corresponding Lasso Hide tool.
* Exposes the selection type for both the lasso and box hide tools
as a option in the header
* Adds functionality into `sculpt_gesture.cc` for handling lasso
selections with the `Outside` selection type
For `SelectionType::Outside`, the current implementation opts to not
do any filtering on the PBVH node level due to cases where the node
is mostly covered by a single gesture.
Addresses one of the tools in #80390
Pull Request: https://projects.blender.org/blender/blender/pulls/119140
Adds copy and paste images functionality to and from the image editor
in Linux/Wayland clipboard.
Currently the only format supported is PNG.
Ref: !119117
As part of #118623, we discovered that the operator used for adding images in the 3D viewport was not the same when drag and dropping as when adding it from the add menu. This lead to different and potentially confusing behaviour for the user when they use both.
This patch removes the python operator and unifies the functionality into one operator. It also renames the operator to be in line with the other "Add X" object operators.
Pull Request: https://projects.blender.org/blender/blender/pulls/118973
Add two snapping increment options: a regular value
(activated with Ctrl) and a precise value (activated with Ctrl+Shift).
These values are separate for 2D and 3D views.
Ref !118760
Allow some View3D buttons to change their width according to content
and Text Styles, rather than be fixed amount of UI_UNIT_X. Examples
include "Object Mode", "Transform Orientation", "Grease Pencil Layers",
"Texture Slots", "Vertex Groups", "Attribute", etc.
Pull Request: https://projects.blender.org/blender/blender/pulls/119223
This PR migrates the existing `PAINT_OT_hide_show` operator to the
previously extracted `gesture` namespace performed in #118881
The current operator has support for choosing whether the hide / show
action is performed on every vertex inside or outside the selection
area. This has been added to the common gesture functionality too,
but no common operator property has been exposed for it for the other
Lasso / Box tools to use.
Other modes of the current "hide_show" operator have been split
into separate operators: `PAINT_OT_hide_show_all` and
`PAINT_OT_hide_show_masked`.
Prerequisite for #80390
Pull Request: https://projects.blender.org/blender/blender/pulls/119040
