This enables the new lazy module loading behavior introduced in OIDN 2.3,
without breaking compatibility with older versions of OIDN (using separate
code paths).
Also, the detection of OIDN support for devices is now much cleaner, and
devices do not need to be matched by PCI address or device name anymore.
Pull Request: https://projects.blender.org/blender/blender/pulls/121362
Change the preview size comparison threshold, so that we only use linear
interpolation for the render preview when zoomed out, and use nearest
neighbor interpolation at 1:1 zoom.
Pull Request: https://projects.blender.org/blender/blender/pulls/120325
This is because sse2neon.h might be used to emulate SSE intrinsics
on ARM64 architecture, and it uses some preprocessor which is not
available for C language when using MSVC.
The old-style math file math_matrix.c uses this header, so needed
to become C++. Simple rename did not work since there is a new math
utility math_matrix.cc exists. Following some existing convention
the math_matrix.c is renamed to math_matrix_c.cc. Eventually all the
code should switch to use C++ style math, and the C style removed,
so it seems reasonable to not mix old and new style of API in the
same file.
There should be no functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/121335
This is an implementation of thin film iridescence in the Principled BSDF based on "A Practical Extension to Microfacet Theory for the Modeling of Varying Iridescence".
There are still several open topics that are left for future work:
- Currently, the thin film only affects dielectric Fresnel, not metallic. Properly specifying thin films on metals requires a proper conductive Fresnel term with complex IOR inputs, any attempt of trying to hack it into the F82 model we currently use for the Principled BSDF is fundamentally flawed. In the future, we'll add a node for proper conductive Fresnel, including thin films.
- The F0/F90 control is not very elegantly implemented right now. It fundamentally works, but enabling thin film while using a Specular Tint causes a jump in appearance since the models integrate it differently. Then again, thin film interference is a physical effect, so of course a non-physical tweak doesn't play nicely with it.
- The white point handling is currently quite crude. In short: The code computes XYZ values of the reflectance spectrum, but we'd need the XYZ values of the product of the reflectance spectrum and the neutral illuminant of the working color space. Currently, this is addressed by just dividing by the XYZ values of the illuminant, but it would be better to do a proper chromatic adaptation transform or to use the proper reference curves for the working space instead of the XYZ curves from the paper.
Pull Request: https://projects.blender.org/blender/blender/pulls/118477
This reverts commit a63e44a61f.
This lead to build failures on linux because `wl_display_get_protocol_error`
is not defined. The error happened on the buildbot too.
Check & print a message if there is an error creating the window.
In both cases Blender will fail to start, it's just better to exit
quickly with a message instead of hanging.
This change was made previously [0] but reverted as it caused the
title-bar to disappear on Ubuntu (see #121241).
Check if the value is set to GNOME delimited by `:`.
Previously checking the interfaces was used which has the down-side
that any compositor that adds `gtk_shell*` support may hang on startup
because of bugs in Blender/LIBDECOR as happened with WAYFIRE,
see reply to #76428.
[0]: 3a5389d5ab
This PR fixes the (currently unused) scene-based selective feature compilation macros. These feature based macros haven't been used for a few years, and enabling them currently results in compilation errors.
The only functional change in this PR is in geom/primitive.h where undef-ing `__HAIR__` had exposed an inconsistency in how pointcloud attributes were being fetched. Using the more general `primitive_surface_attribute_float4` (instead of `curve_attribute_float4`) fixed a compilation error that occurred when rendering pointcloud unit test scenes with adaptive compilation enabled.
Pull Request: https://projects.blender.org/blender/blender/pulls/121216
Disable use of LIBDECOR on WAYFIRE as it causes Blender to hang
on window creation.
Detect WAYFIRE using the presence of the `zwf_shell_manager_v*`
interface, don't use LIBDECOR if this is found.
This is an alternative fix to [0] which also disabled LIBDECOR
but caused LIBDECOR not to be used in GNOME on some systems.
I'm not keen on this solution, but it seems alternatives are less
reliable. See code-comment for details.
[0]: 3a5389d5ab
This reverts commit 3a5389d5ab.
It seems XDG_CURRENT_DESKTOP isn't reliably set,
causing no titlebar on GNOME, see #121241.
The WAYFIRE workaround will need to be resolved another way.
This PR replaces the existing CPU wall-clock based profiling mechanism with more precise GPU counter based timestamps. As before, it is enabled by setting the env var `CYCLES_METAL_PROFILING=1`. Original implementation by Morteza Mostajabodaveh.
Pull Request: https://projects.blender.org/blender/blender/pulls/121208
Transport rays that enter to another location in the scene, with
specified ray position and normal. This may be used to render portals
for visual effects, and other production rendering tricks.
This acts much like a Transparent BSDF. Render passes are passed
through, and this is affected by light path max transparent bounces.
Pull Request: https://projects.blender.org/blender/blender/pulls/114386
Use XDG_CURRENT_DESKTOP to check if GNOME is running.
Previously the existence of a `gtk_shell*` interface was used however
the WAYFIRE compositor provides this interface which made GHOST require
LIBDECOR.
Initializing LIBDECOR was hanging as the initial configuration was
never seen. From a quick check it doesn't seem like a bug in Blender's
LIBDECOR use, the issue may be in either LIBDECOR or WAYFIRE.
Whatever the case, LIBDECOR isn't needed so workaround the bug by
changing how GNOME is detected.
Clamp some of the inputs of the Glossy BSDF, Glass BSDF, Sheen BSDF,
and Subsurface Scattering nodes to improve consistency between render
engines and to avoid unexpected results.
* Clamp roughness to 0..1
* Clamp subsurface radius to 0..inf
* Clamp colors to 0..inf
Pull Request: https://projects.blender.org/blender/blender/pulls/120390
This replaces the fixed Tangent input in BsdfNode::compile
with a custom input.
This is done because very few nodes actually use the tangent input
and it would be better to have this slot available for other inputs
on different nodes in the future.
Pull Request: https://projects.blender.org/blender/blender/pulls/119042
Support detecting if the trackpad direction flag is propertly set
(currently unused).
Needed so Wayland compositors that don't support seat-version 9 or
newer (GNOME-46 & KDE5 for e.g) can have a working trackpad.
Eventually this option will be removed when the functionality is
widely supported.
The slowdown was caused by the volume step calculation returning an
infinite value. This was caused by the calculation happening before
the object bounds are calculated via the code path which does some
early update for the displacement and hair transparency. The actual
value was never re-calculated after bounds are valid.
The solution is to only clear need-update after the final call of
the device_update_flags().
Pull Request: https://projects.blender.org/blender/blender/pulls/121042
Support for building blender with clang on windows on x64 was added
years ago but given there are no active users support has crumbled a
bit.
This PR brings the build system back into working order but upstream
patches in openVDB are still required for a successful build see PR
#120317 for details.
Blender when build with clang the classroom scenes rendered on the cpu
with cycles is seeing a 5% reduction in render time on both an
AMD 7700x and an Intel 14900k.
`Cache::addChannel` would return early when new cache entry insertion
isn't success, but the newly created cache entry isn't deleted upon
return, this patch fixes this.
Pull Request: https://projects.blender.org/blender/blender/pulls/120766
Accumulate scrolling for mouse wheels that create scroll values below
a single "click".
Regression in [0], caused by bumping the seat API.
[0]: 8d86fb43a4
When turning on VR mode, if no controllers are available,
a fallback model (a sphere) is rendered in the middle of the VR area.
This change uses the OpenXR API to check if the controllers are
available, sets new properties in `GHOST_XrPose` and `wmXrController`
that store if each controller is active or not, and uses
those properties to render the controllers in the VR view only
when they are active.
NOTE: in `wmXrController`, two state properties have been included,
but only `grip_active` is currently used. `aim_active` has been
included for consistency, but it could be removed.
Pull Request: https://projects.blender.org/blender/blender/pulls/119989
Replace the C-class pattern function pointers with actual class methods.
Other than the obvious benefit of not requiring the "this" pointer to be
explicitly passed into every function call, this will make it much simpler
to remove the entire C-API class and replace it with its "impl" next.
For that next step we need to expose code to the implementation
of the topology refiner, so instead of defining stubs locally in the
opensubdiv intern class, we spread some WITH_OPENSUBDIV checks
in the blenkernel. As far as I know this is the only way to remove the
intermediate C-API and call opensubdiv functions directly from there.
by ensuring `KernelLight.lightgroup` is properly assigned in
`device_update_light()`. The value is later retrieved via
`lamp_lightgroup(kg, lamp)`.
`light_manager->device_update()` is called after
`background->device_update()`, so the background light group should
already been assigned when `device_update_lights()` is called.
Pull Request: https://projects.blender.org/blender/blender/pulls/120714
use available `film_pass_pixel_render_buffer()` to access the pointer
to the render buffer.
For shadow state, a similar function `film_pass_pixel_render_buffer_shadow()`
is created, because `shadow_path` instead of `path` is needed.
it is difficult to keep in mind when MIS weight is needed, better to
handle this logic in the lower-level functions.
This reduces code duplication in many places.
Avoid unnecessary indirect includes for the module, which would slow
down compilation. Avoid "using std" which is generally not considered
good practice since it's helpful to see what namespace things are from.
This is just a general cleanup of the area. I was trying to understand
it better to reduce redundant mesh topology storage but finding that
some intermediate cleanups would be helpful to ease the change.
Pull Request: https://projects.blender.org/blender/blender/pulls/120743
