This PR fixes the (currently unused) scene-based selective feature compilation macros. These feature based macros haven't been used for a few years, and enabling them currently results in compilation errors.
The only functional change in this PR is in geom/primitive.h where undef-ing `__HAIR__` had exposed an inconsistency in how pointcloud attributes were being fetched. Using the more general `primitive_surface_attribute_float4` (instead of `curve_attribute_float4`) fixed a compilation error that occurred when rendering pointcloud unit test scenes with adaptive compilation enabled.
Pull Request: https://projects.blender.org/blender/blender/pulls/121216
Transport rays that enter to another location in the scene, with
specified ray position and normal. This may be used to render portals
for visual effects, and other production rendering tricks.
This acts much like a Transparent BSDF. Render passes are passed
through, and this is affected by light path max transparent bounces.
Pull Request: https://projects.blender.org/blender/blender/pulls/114386
use available `film_pass_pixel_render_buffer()` to access the pointer
to the render buffer.
For shadow state, a similar function `film_pass_pixel_render_buffer_shadow()`
is created, because `shadow_path` instead of `path` is needed.
Implements the paper [A Microfacet-based Hair Scattering
Model](https://onlinelibrary.wiley.com/doi/full/10.1111/cgf.14588) by
Weizhen Huang, Matthias B. Hullin and Johannes Hanika.
### Features:
- This is a far-field model, as opposed to the previous near-field
Principled Hair BSDF model. The hair is expected to be less noisy, but
lower roughness values takes longer to render due to numerical
integration along the hair width. The hair also appears to be flat when
viewed up-close.
- The longitudinal width of the scattering lobe differs along the
azimuth, providing a higher contrast compared to the evenly spread
scattering in the near-field Principled Hair BSDF model. For a more
detailed comparison, please refer to the original paper.
- Supports elliptical cross-sections, adding more realism as human hairs
are usually elliptical. The orientation of the cross-section is aligned
with the curve normal, which can be adjusted using geometry nodes.
Default is minimal twist. During sampling, light rays that hit outside
the hair width will continue propogating as if the material is
transparent.
- There is non-physical modulation factors for the first three
lobes (Reflection, Transmission, Secondary Reflection).
### Missing:
- A good default for cross-section orientation. There was an
attempt (9039f76928) to default the orientation to align with the curve
normal in the mathematical sense, but the stability (when animated) is
unclear and it would be a hassle to generalise to all curve types. After
the model is in main, we could experiment with the geometry nodes team
to see what works the best as a default.
Co-authored-by: Lukas Stockner <lukas.stockner@freenet.de>
Pull Request: https://projects.blender.org/blender/blender/pulls/105600
Overall, this commit reworks the component layering in the Principled BSDF
in order to ensure that energy is preserved and conserved.
This includes:
- Implementing support for the OSL `layer()` function
- Implementing albedo estimation for some of the closures for layering purposes
- The specular layer that the Principled BSDF uses has a proper tabulated
albedo lookup, the others are still approximations
- Removing the custom "Principled Diffuse" and replacing it with the classic
lambertian Diffuse, since the layering logic takes care of energy now
- Making the merallic component independent of the IOR
Note that this changes the look of the Principled BSDF noticeably in some
cases, but that's needed, since the cases where it looks different are the
ones that strongly violate energy conservation (mostly grazing reflections
with strong Specular).
Pull Request: https://projects.blender.org/blender/blender/pulls/110864
So far, each closure in Cycles was either diffuse OR glossy OR
transmissive, and its color and contributions were assigned
to the corresponding direct/indirect/color passes.
However, since Glass is a single closure now, that is no longer enough,
since glass has both a glossy and a transmissive component.
Therefore, this commit adds support for splitting contributions from
the Glass closure between the two types.
For 4.0, we might want to also use this for Principled Hair since it
also technically has both types, but that would be a change from
the existing result so it's not part of 3.6 yet.
This is both a cleanup and a preparation for the Principled v2 changes.
Notable changes:
- Clearcoat weight is now folded into the closure weight, there's no reason
to track this separately.
- There's a general-purpose helper for computing a Closure's albedo, which is
currently used by the denoising albedo and diffuse/gloss/transmission color
passes.
- The d/g/t color passes didn't account for closure albedo before, this means
that e.g. metallic shaders with Principled v2 now have their color texture
included in the glossy color pass. Also fixes T104041 (sheen albedo).
- Instead of precomputing and storing the albedo during shader setup, compute
it when needed. This is technically redundant since we still need to compute
it on shader setup to adjust the sample weight, but the operation is cheap
enough that freeing up the storage seems worth it.
- Future changes (Principled v2) are easier to integrate since the Fresnel
handling isn't all over the place anymore.
- Fresnel handling in the Multiscattering GGX code is still ugly, but since
removing that entirely is the next step, putting effort into cleaning it up
doesn't seem worth it.
- Apart from the d/g/t color passes, no changes to render results are expected.
Differential Revision: https://developer.blender.org/D17101
This was not working well in non-trivial scenes before the light tree, and now
it is even harder to make it work well with the light tree. It would average the
with equal weight for every light object regardless of intensity or distance, and
be quite noisy due to not working with multiple importance sampling.
We may restore this if were enough good use cases for the previous implementation,
but let's wait and see what the feedback is.
Some uses cases for this have been replaced by the shadow catcher passes, which
did not exist when this was added.
Ref T77889
For some pixels with transparent surfaces, no depth value would be written
when sampling chooses a reflection/refraction BSDF instead of transparent
BSDF. Now ensure we always write at some some depth value to the pass.
This is still not ideal as the resulting depth values are noisy same as they
are for depth of field and motion blur, but at least there should be no gaps.
Render time is reduced for overexposed scenes, by taking into account absolute
light intensity for adaptive sampling.
This can negatively affect some scenes where compositing or color management
are used to make the scene much darker or lighter. For best results adjust the
Film > Exposure setting to bring the intensity into a good range, and then do
further compositing and color management on top of that. Note that this setting
is different than color management exposure.
Previously Cycles' adaptive sampling used sqrt(I) to normalize noise level to
conform to a viewer's eye sensitivity. It is great for darker regions of the
image, but also requests too much samples in bright regions, sometimes several
times more than needed. Highlights can tolerate more noise because in most
examples it is still less noticeable then the noise in darker areas in the same
render.
Differential Revision: https://developer.blender.org/D16392
Cleans up the file structure to be more similar to that of the SVM
and also makes it possible to build kernels with OSL support, but
without having to include SVM support.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15949
This uses the same sample classification approach as used for PMJ,
because it turns out to also work equally well with Sobol-Burley.
This also implements a fallback (random classification) that should
work "okay" for other samplers, though there are no other samplers
at the moment.
Differential Revision: https://developer.blender.org/D15845
These replace float3 and packed_float3 in various places in the kernel where a
spectral color representation will be used in the future. That representation
will require more than 3 channels and conversion to from/RGB. The kernel code
was refactored to remove the assumption that Spectrum and RGB colors are the
same thing.
There are no functional changes, Spectrum is still a float3 and the conversion
functions are no-ops.
Differential Revision: https://developer.blender.org/D15535
This patch unifies the names of math functions for different data types and uses
overloading instead. The goal is to make it possible to swap out all the float3
variables containing RGB data with something else, with as few as possible
changes to the code. It's a requirement for future spectral rendering patches.
Differential Revision: https://developer.blender.org/D15276
Found those missing casts while looking into a crash report made in
the Blender Chat. Was unable to reproduce the crash, but the casts
should totally be there to avoid integer overflow.
Light groups are a type of pass that only contains lighting from a subset of light sources.
They are created in the View layer, and light sources (lamps, objects with emissive materials
and/or the environment) can be assigned to a group.
Currently, each light group ends up generating its own version of the Combined pass.
In the future, additional types of passes (e.g. shadowcatcher) might be getting their own
per-lightgroup versions.
The lightgroup creation and assignment is not Cycles-specific, so Eevee or external render
engines could make use of it in the future.
Note that Lightgroups are identified by their name - therefore, the name of the Lightgroup
in the View Layer and the name that's set in an object's settings must match for it to be
included.
Currently, changing a Lightgroup's name does not update objects - this is planned for the
future, along with other features such as denoising for light groups and viewing them in
preview renders.
Original patch by Alex Fuller (@mistaed), with some polishing by Lukas Stockner (@lukasstockner97).
Differential Revision: https://developer.blender.org/D12871
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
Was happening during rendering, causing visual artifacts when doing
CPU+GPU rendering, and giving different in-progress results on different
devices.
The root of the issue comes to the fact that math used in the approximate
shadow catcher calculation might have resulted in negative alpha channel,
and negative values for display are handled differently on CPU and GPU.
Such difference in handling is caused by an approximate conversion used on
the CPU for the performance reasons.
This change makes it so no negative alpha is generated by the approximate
shadow catcher. Not sure if we need some explicit clamping somewhere to
deal with possible negative values coming from somewhere else.
The shadow catcher cornell box tests are to be updated for the new code,
but the new result seems to be more accurate.
Differential Revision: https://developer.blender.org/D13354
This patch contains many small leftover fixes and additions that are
required for Metal-enablement:
- Address space fixes and a few other small compile fixes
- Addition of missing functionality to the Metal adapter headers
- Addition of various scattered `__KERNEL_METAL__` blocks (e.g. for
atomic support & maths functions)
Ref T92212
Differential Revision: https://developer.blender.org/D13263
Introduce a packed_float3 type for smaller storage that is exactly 3
floats, instead of 4. For computation float3 is still used since it can
use SIMD instructions.
Ref T92212
Differential Revision: https://developer.blender.org/D13243
We need to increase GPU memory usage a bit. Unfortunately we can't get away
with writing either reflection or transmission passes because these BSDFs may
scatter in either direction but still must be in a fixed reflection or
transmission category to match up with the color passes.
The issue was caused by splitting happening twice.
Fixed by checking for split flag which is assigned to the both states
during split.
The tricky part was to write catcher data at the moment of split: the
transparency and shadow catcher sample count is to be accumulated at
that point. Now it is happening in the `intersect_closest` kernel.
The downside is that render buffer is to be passed to the kernel, but
the benefit is that extra split bounce check is not needed now.
Had to move the passes write to shadow catcher header, since include
of `film/passes.h` causes all the fun of requirement to have BSDF
data structures available.
Differential Revision: https://developer.blender.org/D13177
This patch exposes the sampling offset option to Blender. It is located in the "Sampling > Advanced" panel.
For example, this can be useful to parallelize rendering and distribute different chunks of samples for each computer to render.
---
I also had to add this option to `RenderWork` and `RenderScheduler` classes so that the sample count in the status string can be calculated correctly.
Reviewed By: leesonw
Differential Revision: https://developer.blender.org/D13086
saturate is depricated in favour of __saturatef this replaces saturate
with __saturatef on CUDA by createing a saturatef function which replaces
all instances of saturate and are hooked up to the correct function on all
platforms.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13010
