Advanced ID copying code can now take a `new_owner_id` ID pointer parameter,
and use it to set the relevant 'loopback' pointer to its owner ID by the
copy code itself.
Besides avoiding the need for all code copying embedded IDs to set the
loopback pointer themselves, this also means that `lib_id` copying code
itself does not need to use `IDWALK_IGNORE_MISSING_OWNER_ID` anymore.
This change is not expected to have any effect in current codebase.
This makes the read and write API functions match more closely, and adds
asserts to check that the data size is as expected.
There are still a few places remaining that use BLO_read_data_address
and similar generic functions, these should eventually be replaced as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/120994
Also access the evaluated deform mesh with a function rather than
directly from object runtime data. The goal is to make it easier to use
implicit sharing for these meshes and to improve overall const
correctness.
Caused by 9c1da81a4c.
This happened in the case where objects shared the same data and slots
are assigned to object and receiving object did not have a material slot
yet.
Then, `ob->matbits` may be NULL, now just check for this, too.
Pull Request: https://projects.blender.org/blender/blender/pulls/119161
Seems to work OK in basic cases, but needs more work when copying
outside of Main at least.
Note: There is no behavioral changes expected from this commit.
Note that there are at least two known usecases for this change:
* Liboverrides, as with recursive resync and proxies conversion it
often ends up creating 'virtual' linked data that does not actually
exists in the library blend files.
* Complex versionning code (`do_versions_after_setup`) when it needs
to create new IDs (currently handling linked data that way is just not
supported!).
Implements #107847.
The depsgraph CoW mechanism is a bit of a misnomer. It creates an
evaluated copy for data-blocks regardless of whether the copy will
actually be written to. The point is to have physical separation between
original and evaluated data. This is in contrast to the commonly used
performance improvement of keeping a user count and copying data
implicitly when it needs to be changed. In Blender code we call this
"implicit sharing" instead. Importantly, the dependency graph has no
idea about the _actual_ CoW behavior in Blender.
Renaming this functionality in the despgraph removes some of the
confusion that comes up when talking about this, and will hopefully
make the depsgraph less confusing to understand initially too. Wording
like "the evaluated copy" (as opposed to the original data-block) has
also become common anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118338
This data was 'hidden' away in a util in
`lib_query.cc`, which made it hard to discover and keep up-to-date.
However, as shown by e.g. #108407, critical low-level features in ID
management code, such as remapping, now rely on this information being
valid.
Also simplify `BKE_library_id_can_use_filter_id` and
`BKE_library_id_can_use_idtype` to make them more generic, relying on
IDTypeInfo to retrieve IDtype-specific info.
No behavioral changes expected here.
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Except for vertex groups and a few older color types, these
are generally replaced by newer generic attribute types.
Also remove some includes of DNA_mesh_types.h, since it's
included indirectly by BKE_mesh.hh currently.
Remove most includes of this header inside other headers, to remove unnecessary
indirect includes which can have a impact on compile times. In the future we may
want more dedicated "_fwd.hh" headers, but until then, this sticks with the
solution in existing code.
Unfortunately it isn't yet possible to remove the include from `BKE_geometry_set.hh`.
Similar to 64e955f522 (but extended a bit).
Fix by preventing access of non-existent (or out of bounds)
`TexPaintSlot`.
In the future, we should probably even prevent it further by using
`RNA_def_property_int_funcs` (but that is for a later commit).
Pull Request: https://projects.blender.org/blender/blender/pulls/116345
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
There was two problems because these operators were not supported in GPv3:
* If you remove the slot, the material was not reassigned and the material index attribute could get a wrong index. This also affected the unused slots.
* The Unused Materials operator was executed, but it was doing nothing because there was not support for new GPv3 object.
This PR adds support for new Grease Pencil object.
Pull Request: https://projects.blender.org/blender/blender/pulls/114850
Move object runtime data to a separate header and allocate it separately
as `blender::bke::ObjectRuntime`. This is how node, mesh, curves, and
point cloud runtime data is stored.
Benefits:
- Allow using C++ types in object runtime data
- Reduce space required for Object struct in files
- Increase conceptual separation between DNA and runtime data
- Remove the need to add manual padding in runtime data
- Include runtime struct definition only in files that require it
Pull Request: https://projects.blender.org/blender/blender/pulls/113957
Extract:
- Sculpt filter types from the Sculpt menu. Some of these types use a
custom label, different from those defined in the operator RNA,
which was never extracted.
- "Today" and "Yesterday" from the file browser modification date.
- All name_plural from IDs, as these are used in the UI to list which
data block is to be removed, when calling outliner.orphans_purge.
Disambiguate:
- "Area", meaning the measurement of a surface as opposed to a place.
Some messages reported by Satoshi Yamasaki in #43295.
Pull Request: https://projects.blender.org/blender/blender/pulls/113912
Previously, BKE level preview image code was in `BKE_icons.h` and `icons.hh`.
While these types are related, I always found this quite hard to navigate since
preview image stuff was just in the middle of icon functions. Plus, people
don't expect preview image functions in icon files, the relationship is not
obvious.
Instead, use focused files that make it easy to quickly navigate them
and see what they are dealing with.
Pull Request: https://projects.blender.org/blender/blender/pulls/111709
The hash tables and vector blenlib headers were pulling many more
headers than they actually need, including the C base math header,
our C string API header, and the StringRef header. All of this
potentially slows down compilation and polutes autocomplete
with unrelated information.
Also remove the `ListBase` constructor for `Vector`. It wasn't used
much, and making it easy to use `ListBase` isn't worth it for the
same reasons mentioned above.
It turns out a lot of files depended on indirect includes of
`BLI_string.h` and `BLI_listbase.h`, so those are fixed here.
Pull Request: https://projects.blender.org/blender/blender/pulls/111801
The `lib_link` callback cannot always be fully replaced/removed, as in
some case it is also doing some validation checks, or data editing based
on the result of lib_linking internal ID pointers.
The callback has been renamed for that purpose, from `read_lib` to
`read_after_liblink`. It is now called after all ID pointers have been
fully lib-linked for the current ID, but still before the call to
`do_versions_after_linking`.
This change should not have any behavioral effect. Although in theory
the side-effect of this commit (to split lib linking itself, and the
validation/further processing code) into two completely separated steps
could have some effects, in practice none are expected, and tests did
not show any changes in behavior either..
Part of implementing #105134: Removal of readfile's lib_link & expand code.
The `expand` callback is 'trivial' to replace, since it is only iterating
over ID pointers and calling a callback.
The only change in behavior here is that some pointers that were not
processed previously will now be.
In practice this is not expected to have any real effect (usually
the IDs used by these pointers would have been expanded through other
usages anyway). But it may solve a few corner cases, undocumented issues
though.
Part of implementing #105134: Removal of readfile's lib_link & expand code.
This commit adds a new option flag to the lib_query foreach_id code,
which will make deprecated ID pointers to be processed as well.
NOTE: Currently there is no report to the callbakcs about the fact that
it is processing a deprecated ID. This can be easily added later if it
becomes necessary.
Part of implementing #105134: Removal of readfile's lib_link & expand code.
There is no reason at all for each ID read/write callbacks to have to
deal with this generic, common data explicitely. Generic ID read/write
code is the place to handle such data (just like asset, liboverride,
etc. data are handled already).
Note behavioral change expected here.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
First implementation of node previews in the shader node editor. Using
the same user interface as compositor node previews, most shader nodes
can now be previewed (except group in/output and material output).
This is currently still an experimental feature, as polishing of the
user experience and performance improvements are planned. These will
be easier to do as incremental changes on this implementation.
See #110353 for details on the work that remains to be done and known
limitations.
Implementation notes:
We take advantage of the `RenderResult` available as `ImBuf` images to
store a `Render` for every viewed nested node tree present in a
`SpaceNode`. The computation is initiated at the moment of drawing nodes
overlays.
One render is started for the current nodetree, having a `ViewLayer`
associated with each previewed node. We separate the previewed nodes in
two categories: the shader ones and the non-shader ones.
- For non-shader nodes, we use AOVs which highly speed up the rendering
process by rendering every non-shader nodes at the same time. They are
rendered in the first `ViewLayer`.
- For shader nodes, we render them each in a different `ViewLayer`, by
rerouting the node to the output of the material in the preview scene.
The preview scene takes the same aspect as the Material preview scene,
and the same preview object is used.
At the moment of drawing the node overlay, we take the `Render` of the
viewed node tree and extract the `ImBuf` of the wanted viewlayer/pass
for each previewed node.
Pull Request: https://projects.blender.org/blender/blender/pulls/110065
References to data-blocks in a material were stored in-memory and could
crash if the data-blocks referenced by the material no longer existed
when pasting.
Resolve by using a blend-file for material copy/paste, matching how the
clipboard works in the 3D view-port.
Currently there is no support for including indirectly linked
data-blocks when pasting the material. Instead, data-blocks are restored
by name, by inspecting the current file.
This also fixes a crash where the `SpaceNode::nodetree` could point to
freed memory when pasting a material.
Ref !108496.
Includes contributions by @mont29.
