Previously, we haven't added this because there were plans to use these
declarations at a higher abstraction level where one declaration potentially
contains more than one socket. This hasn't happened yet, and we are also using
other ways to achieve dynamic socket amounts (using dynamic declarations).
Therefore, it is reasonable to simplify the code by storing the integer socket
type in the declaration directly.
Pull Request: https://projects.blender.org/blender/blender/pulls/119691
Over the last couple years (!) UI buttons have moved to derived classes,
meaning we don't need to use the same "a1" and "a2" variables to store
different information. At this point, that information is set specifically
by internal UI code, or functions like `UI_but_*_set`.
These values are only set to their default 0 values now (or -1 in some
non-meaningful cases). This commit removes the values from buttons
and removes the remaining a1 and a2 arguments from the UI API.
Implements the design from #116067.
The socket type is called "Matrix" but it is often referred to as "Transform"
when that's what it is semantically. The attribute type is "4x4 Matrix" since
that's a lower level choice. Currently matrix sockets are always passed
around internally as `float4x4`, but that can be optimized in the future
when smaller types would give the same behavior.
A new "Matrix" utilities category has the following set of initial nodes"
- **Combine Transform**
- **Separate Transform**
- **Multiply Matrices**
- **Transform Direction**
- **Transform Vector**
- **Invert Matrix**
- **Transpose Matrix**
The nodes and socket type are behind an experimental flag for now,
which will give us time to make sure it's the right set of initial nodes.
The viewer node overlay doesn't support matrices-- they aren't supported
for rendering in general. They also aren't supported in the modifier interface
currently. But they are supported in the spreadsheet, where the value is
displayed in a tooltip.
Pull Request: https://projects.blender.org/blender/blender/pulls/116166
For icons that represent collapsible and collapsed content we use a
variety of icons: chevrons and closed triangles of varying
proportions. This PR makes everything use a chevron for consistency.
Pull Request: https://projects.blender.org/blender/blender/pulls/116240
This patch adds support for _Menu Switch_ nodes and enum definitions in
node trees more generally. The design is based on the outcome of the
[2022 Nodes Workshop](https://code.blender.org/2022/11/geometry-nodes-workshop-2022/#menu-switch).
The _Menu Switch_ node is an advanced version of the _Switch_ node which
has a customizable **menu input socket** instead of a simple boolean.
The _items_ of this menu are owned by the node itself. Each item has a
name and description and unique identifier that is used internally. A
menu _socket_ represents a concrete value out of the list of items.
To enable selection of an enum value for unconnected sockets the menu is
presented as a dropdown list like built-in enums. When the socket is
connected a shared pointer to the enum definition is propagated along
links and stored in socket default values. This allows node groups to
expose a menu from an internal menu switch as a parameter. The enum
definition is a runtime copy of the enum items in DNA that allows
sharing.
A menu socket can have multiple connections, which can lead to
ambiguity. If two or more different menu source nodes are connected to a
socket it gets marked as _undefined_. Any connection to an undefined
menu socket is invalid as a hint to users that there is a problem. A
warning/error is also shown on nodes with undefined menu sockets.
At runtime the value of a menu socket is the simple integer identifier.
This can also be a field in geometry nodes. The identifier is unique
within each enum definition, and it is persistent even when items are
added, removed, or changed. Changing the name of an item does not affect
the internal identifier, so users can rename enum items without breaking
existing input values. This also persists if, for example, a linked node
group is temporarily unavailable.
Pull Request: https://projects.blender.org/blender/blender/pulls/113445
The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Customs sockets always ignore their draw_color method and are always
drawn using a magenta color.
This is a regression that was introduced in e071288ab2. The commit used
the simple variant even for drawing nodes where a context is available.
So this patch mostly reverts those changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/114148
The last good commit was 8474716abb.
After this commits from main were pushed to blender-v4.0-release. These are
being reverted.
Commits a4880576dc from to b26f176d1a that happend afterwards were meant for
4.0, and their contents is preserved.
This helps solving the problem encountered in #113553. The problem is that we
currently can't support link-drag-search for nodes which have a dynamic declaration.
With this patch, there is only a single `declare` function per node type, instead of
the separate `declare` and `declare_dynamic` functions. The new `declare` function
has access to the node and tree. However, both are allowed to be null. The final
node declaration has a flag for whether it depends on the node context or not.
Nodes that previously had a dynamic declaration should now create as much of
the declaration as possible that does not depend on the node. This allows code
like for link-drag-search to take those sockets into account even if the other
sockets are dynamic.
For node declarations that have dynamic types (e.g. Switch node), we can also
add extra information to the static node declaration, like the identifier of the socket
with the dynamic type. This is not part of this patch though.
I can think of two main alternatives to the approach implemented here:
* Define two separate functions for dynamic nodes. One that creates the "static
declaration" without node context, and on that creates the actual declaration with
node context.
* Have a single declare function that generates "build instructions" for the actual
node declaration. So instead of building the final declaration directly, one can for
example add a socket whose type depends on a specific rna path in the node.
The actual node declaration is then automatically generated based on the build
instructions. This becomes quite a bit more tricky with dynamic amounts of sockets
and introduces another indirection between declarations and what sockets the node
actually has.
I found the approach implemented in this patch to lead to the least amount of
boilerplate (doesn't require a seperate "build instructions" data structure) and code
duplication (socket properties are still only defined in one place). At the same time,
it offers more flexibility to how nodes can be dynamic.
Pull Request: https://projects.blender.org/blender/blender/pulls/113742
This replaces the older dynamic c arrays with blender::Vector as
appropriate. Many files required minimal changes and the before/after
are quite similar.
There's 3 remaining usages of the old machinery but those will require
more involved changes and design.
See #103343
Pull Request: https://projects.blender.org/blender/blender/pulls/110981
Nodes recently gained the ability to group inputs into collapsible
panels. These were untranslated, so this commit:
- Adds the appropriate regex to extract node panels defined with
the `add_panel()` callback.
- Adds the `IFACE()` translation macro to the drawing code for the
nodes, as well as the properties.
Pull Request: https://projects.blender.org/blender/blender/pulls/112968
With a callback to node panels similar to the one for nodes. Used in the
Principled BSDF to place enums in the relevant panels.
Longer term we want to make enums into sockets, but even then there are
still potentially some types of buttons we want to have in panels.
Pull Request: https://projects.blender.org/blender/blender/pulls/112591
The layout for this is not great but consistent with existing
collapse/expand functionality there. There are ideas to replace this
entire material properties drawing longer term, but for 4.0 it's
important to show the panels in some way.
Pull Request: https://projects.blender.org/blender/blender/pulls/112591
Calling an API function after the node panels patch does not internally
tag the node tree with `NTREE_CHANGED_INTERFACE` any more, because the
node tree is not directly accessible from `bNodeTreeInterface`. Before
node panels the API functions for interfaces could tag the tree directly
for later update consideration, which now requires explicit tagging
calls.
The fix is to add a flag and mutex directly to `bNodeTreeInterface`, so
API methods can tag after updates. This mostly copies runtime data
concepts from `bNodeTree`. The `ensure_interface_cache` method is
equivalent to `ensure_topology_cache` and should be called before
accessing `interface_inputs` and similar cache data.
Pull Request: https://projects.blender.org/blender/blender/pulls/111741
There are a couple of functions that create rna pointers. For example
`RNA_main_pointer_create` and `RNA_pointer_create`. Currently, those
take an output parameter `r_ptr` as last argument. This patch changes
it so that the functions actually return a` PointerRNA` instead of using
the output parameters.
This has a few benefits:
* Output parameters should only be used when there is an actual benefit.
Otherwise, one should default to returning the value.
* It's simpler to use the API in the large majority of cases (note that this
patch reduces the number of lines of code).
* It allows the `PointerRNA` to be const on the call-site, if that is desired.
No performance regression has been measured in production files.
If one of these functions happened to be called in a hot loop where
there is a regression, the solution should be to use an inline function
there which allows the compiler to optimize it even better.
Pull Request: https://projects.blender.org/blender/blender/pulls/111976
Part 3/3 of #109135, #110272
Switch to new node group interfaces and deprecate old DNA and API.
This completes support for panels in node drawing and in node group
interface declarations in particular.
The new node group interface DNA and RNA code has been added in parts
1 and 2 (#110885, #110952) but has not be enabled yet. This commit
completes the integration by
* enabling the new RNA API
* using the new API in UI
* read/write new interfaces from blend files
* add versioning for backward compatibility
* add forward-compatible writing code to reconstruct old interfaces
All places accessing node group interface declarations should now be
using the new API. A runtime cache has been added that allows simple
linear access to socket inputs and outputs even when a panel hierarchy
is used.
Old DNA has been deprecated and should only be accessed for versioning
(inputs/outputs renamed to inputs_legacy/outputs_legacy to catch
errors). Versioning code ensures both backward and forward
compatibility of existing files.
The API for old interfaces is removed. The new API is very similar but
is defined on the `ntree.interface` instead of the `ntree` directly.
Breaking change notifications and detailed instructions for migrating
will be added.
A python test has been added for the node group API functions. This
includes new functionality such as creating panels and moving items
between different levels.
This patch does not yet contain panel representations in the modifier
UI. This has been tested in a separate branch and will be added with a
later PR (#108565).
Pull Request: https://projects.blender.org/blender/blender/pulls/111348
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
`identifier` should be a better measure than `name` to check if a socket
has the same meaning among different nodes. Sometimes two sockets can
have the same name in the UI but have different (physical) meanings,
they can specify different identifiers to avoid the values being copied
when the nodes are replaced.
Pull Request: https://projects.blender.org/blender/blender/pulls/110792
Add a quaternion rotation socket type, and using the recently added
rotation attribute type, support the type in most of the multi-type
geometry nodes, and modifier attribute inputs and outputs.
The socket is still exposed with an XYZ Euler default value.
In the future we can add modes to this rotation value similar
to object rotations.
Rotation values have no implicit conversions to other types.
Nodes to convert to and from rotation values will be added
in a follow-up commit.
For now, the new socket type is hidden behind and experimental
option, because we haven't chosen the final color for it yet.
Pull Request: https://projects.blender.org/blender/blender/pulls/108903
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
Small memory allocations are a bottleneck when drawing large node trees.
Avoid them by passing the socket index in the whole tree and getting the
tree from the context rather than allocating structs for the tree, node,
and socket. The performance improvement will be a few percent at most.
When these declarations are built without the help of the special
builder class, it's much more convenient to set them directly rather
than with a constructor, etc. In most other situations the declarations
should be const anyway, so theoretically this doesn't affect safety too
much. Most construction of declarations should still use the builder.
Some nodes, like Combine Color or the math nodes, label sockets
differently depending on the mode to be more descriptive.
`uiTemplateNodeView` now also uses this dynamic label rather than the
socket's name for labeling in the UI so the shown labels always match
the ones on the node itself.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16563
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
Currently, hovering over a socket itself shows no tooltip at all, while
hovering over its value field shows "Default value", which is not helpful.
This patch therefore implements socket tooltips following the proposal at
https://blender.community/c/rightclickselect/2Qgbbc/.
A lot of the basic functionality was already implemented for Geometry Nodes,
where hovering over the socket itself shows introspection info.
This patch extends this by:
- Supporting dynamic tooltips on labels, which is important for good tooltip
coverage in a socket's region of the node.
- Adding a function to setting a dynamic tooltip for an entire uiLayout, which
avoids needing to set it manually for a wide variety of socket types.
- Hiding the property label field in a tooltip when dynamic tooltip is also
provided. If really needed, this label can be restored through the dynamic
tooltip, but in all current cases the label is actually pointless anyways
since the dynamic tooltip gives more accurate and specific information.
- Adding dynamic tooltips to a socket's UI layout row if it has a description
configured, both in the Node Editor as well as in the Material Properties.
Note that the patch does not add any actual tooltip content yet, just the
infrastructure to show them. By default, sockets without a description still
show the old "Default value" tooltip.
For an example of how to add socket descriptions, check the Cylinder node
in the Geometry Nodes.
Differential Revision: https://developer.blender.org/D9967
It's better to use some local/stable identifiier to avoid relying on
the data not being freed in between creating the search menu and
the exec function. This is similar to c473b2ce8b.
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
