`AssetHandle` is meant as temporary design and should be replaced by
`AssetRepresentation`. This moves us another step closer to that.
Rather than taking data from the volatile asset handle and storing that
in the drag data, store the (more persistent) asset representation there
and access data from it where needed.
Hopefully now the behavior is fully consistent with before the refactor,
current implemented one by this commit:
- When loading factory settings file on startup, go full-screen.
- In all other startup cases, use size as stored in the startup .blend
file.
Regression from ebb5643e59 and 32bbfbb06e.
* opengl_context -> system_gpu_context. This is the operating system OpenGL,
Metal or Vulkan context provided by GHOST.
* gpu_context -> blender_gpu_context. This is the GPUContext provided by
the Blender GPU module, which wraps the GHOST context and adds some state.
* Various functions create/destroy/enable/disable both contexts, these have
just gpu_context in the name now.
Pull Request: https://projects.blender.org/blender/blender/pulls/108723
When opening 'homefile' (i.e. startup or factory startup) at Blender
start (i.e. when there is no existing WM yet), the size of the windows
in the newly read WM is reset to zero, which will then cause `WM_check`
to re-size them the the maximum possible size on current monitor.
Regression from ebb5643e59.
This commit affects:
* Reading undo steps from memfile (aka 'Global Undo');
* Handling of UI IDs (WindowManager, Workspaces and Screens) when
opening a .blend file.
While no major changes are expected from a user PoV, there may be some
unexpected changes in rare edge-cases. None has been identified so far.
Undo step loading should be marginally faster (`setup_app_data` itself
is 2-3 times faster, as it does not do remapping anymore, which makes the
whole 'read undo step' process about 20% faster - but the most
time-consuming step on undo is the depsgraph processing, which remains
unchanged here).
This commit also solves some bugs (crashes) in some relatively uncommon
cases, like e.g. if the WM had an IDProperty pointing at an object and
UI is not loaded when opening a new .blend file with the 'Load UI' option
enabled (as in previous code on file opening WM ID would never be
remapped).
From a more technical side, this commit aims mainly at cleaning things
up, in preparation for the introduction of new 'no undo, no readfile'
type of handling (as part of the Brush Assets project):
- Prevent WM code from doing (too much) horrible ID 'management' on
its WM when opening a new file. It used to remove current WM from
the Main database, store it in a temporary own list, and then free
it itself...
- Trying to make the complex logic behind WM handling on file reading a
bit more easy to follow, at least way more documented in code.
- Keep the handling of 'IDs being re-used from old Main' in a single
place, as much as possible:
-- Readfile code itself in undo case (because it's more efficient,
and undo case is in a way simpler than actual .blend file
reading case). The whole `blo_lib_link_restore` block of code
is also removed.
-- (Mostly) setup_app_data code in actual file reading case.
- Sanitize the usage of the 'libmap' in readfile code in undo case
(waaaaay too many pointers were added there, which was hiding some
other issues in the related code, and potentially causing (in
rare cases) memory addresses collisions.
Pull Request: https://projects.blender.org/blender/blender/pulls/108016
Failure to load an image-buffer during animation playback would exit,
display a text warning instead because it could potentially
exit during user interaction/playback.
References to data-blocks in a material were stored in-memory and could
crash if the data-blocks referenced by the material no longer existed
when pasting.
Resolve by using a blend-file for material copy/paste, matching how the
clipboard works in the 3D view-port.
Currently there is no support for including indirectly linked
data-blocks when pasting the material. Instead, data-blocks are restored
by name, by inspecting the current file.
This also fixes a crash where the `SpaceNode::nodetree` could point to
freed memory when pasting a material.
Ref !108496.
Includes contributions by @mont29.
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
Commented [0] (2.5x refactor that disabled many free functions),
for some reason this call was never re-enabled.
Add back the free call along with other clipboard buffers.
[0]: a1c8543f2a
When a file passed in from the command line failed to load,
blender would exit & save the quit.blend.
Resolve by adding a `do_user_exit_actions` to WM_exit_ex which is
false in backgrounds mode or when an error has occurred.
Callers to WM_exit needed to set G.is_break for a predictable exit-code.
This is error prone as G.is_break may be set based on the user having
pressed escape during event handling.
Instead, pass the exit code as an argument.
WM_exit calls `exit(G.is_break == true)` which only makes sense in
background mode, pressing escape sets `is_break` which isn't cleared,
causing an error exit-code of 1 on exit.
Covers the macro ARRAY_SIZE() and STRNCPY.
The problem this change is aimed to solve it to provide cross-platform
compiler-independent safe way pf ensuring that the functions are used
correctly.
The type safety was only ensured for GCC and only for C. The C++
language and Clang compiler would not have detected issues of passing
bare pointer to neither of those macros.
Now the STRNCPY() will only accept a bounded array as the destination
argument, on any compiler.
The ARRAY_SIZE as well, but there are a bit more complications to it
in terms of transparency of the change.
In one place the ARRAY_SIZE was used on float3 type. This worked in the
old code because the type implements subscript operator, and the type
consists of 3 floats. One would argue this is somewhat hidden/implicit
behavior, which better be avoided. So an in-lined value of 3 is used now
there.
Another place is the ARRAY_SIZE used to define a bounded array of the
size which matches bounded array which is a member of a struct. While
the ARRAY_SIZE provides proper size in this case, the compiler does not
believe that the value is known at compile time and errors out with a
message that construction of variable-size arrays is not supported.
Solved by converting the field to std::array<> and adding dedicated
utility to get size of std::array at compile time. There might be a
better way of achieving the same result, or maybe the approach is
fine and just need to find a better place for such utility.
Surely, more macro from the BLI_string.h can be covered with the C++
inlined functions, but need to start somewhere.
There are also quite some changes to ensure the C linkage is not
enforced by code which includes the headers.
Pull Request: https://projects.blender.org/blender/blender/pulls/108041
Implements a new API consisting of:
- `ED_view3d_navigation_init`,
- `ED_view3d_navigation_do` and
- `ED_view3d_navigation_free`,
With these functions, any operator can create their own navigation
context and navigate in the 3D View without having to use
`PASS_THROUGH`.
Add a ensure_utf8 argument to WM_clipboard_text_get so callers don't
have to handle validation themselves.
Copying non-utf8 text into the Python console and buttons was possible,
causing invalid cursor position and a UnicodeDecodeError accessing
ConsoleLine.body from Python.
The goal is to make it more explicit and centralized operation to
assign and steal buffer data, with proper ownership tracking.
The buffers and ownership flags are wrapped into their dedicated
structures now.
There should be no functional changes currently, it is a preparation
for allowing implicit sharing of the ImBuf buffers. Additionally, in
the future it is possible to more buffer-specific information (such
as color space) next to the buffer data itself. It is also possible
to clean up the allocation flags (IB_rect, ...) to give them more
clear naming and not have stored in the ImBuf->flags as they are only
needed for allocation.
The most dangerous part of this change is the change of byte buffer
data from `int*` to `uint8_t*`. In a lot of cases the byte buffer was
cast to `uchar*`, so those casts are now gone. But some code is
operating on `int*` so now there are casts in there. In practice this
should be fine, since we only support 64bit platforms, so allocations
are aligned. The real things to watch out for here is the fact that
allocation and offsetting from the byte buffer now need an explicit 4
channel multiplier.
Once everything is C++ it will be possible to simplify public
functions even further.
Pull Request: https://projects.blender.org/blender/blender/pulls/107609
The usage of the lib pointer was cryptic to say the least, it was
essentialy used to allow or not local IDs results in the mapping
old_id_pointer -> new_id_pointer lookup result.
Now:
- Explicitely pass a boolean to allow or not local ID as result in
lower-level code.
- Pass the 'self ID' pointer instead of its library to the whole
liblinking code (that was already the case in a few places).
Note that naming of the 'self id' pointer is currently very inconsistent
throughout the readfile liblink code, this will have to be cleaned up in
a separate step later. For now, `self_id` has been chosen for new code
as it matches the terminology in lib_query code.
The later change can also allow finer handling of lookup on undo, based
on how it was re-read (or not), should the need for this arise.
This function handles cleaning valid system paths that are functional
when passed to `open(..)` but may be relative to the current working
directory or have redundant slashers that can be normalized.
Include the term "overwrite" so users of this function are aware
this function will delete the destination file (unlike LIBC rename).
- Add BLI_rename_overwrite (previously called BLI_rename).
- BLI_rename is now a wrapper for rename.
Use BLI_rename when renaming in the file selector.
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
Ensure the file path G.main->filepath is always absolute and normalized.
- It was possible to call WM_OT_open_mainfile with only a filename,
if this resolved from the CWD, Blender's internal filepath
would not be absolute as expected.
- It was possible to open files on UNIX with an additional forward slash
causing the blend file path it's self to contain a '//' prefix,
this is error prone as running BLI_path_abs(..) multiple times would
add the blend file prefix each time.
- Remove requirement for "filepath" to be an absolute path when saving.
Instead, expand the path - making it absolute, as this constraint
wasn't applied open opening files, prefer making save/open behave
consistently.
- Assert when BLI_path_abs/BLI_path_rel receive a basepath that has
a "//" (relative) prefix itself.
- "... (matches pythons ...)": capitalize and use possessive ('s).
- "Layer Proxy Protection": replace proxy by override, following 2.80.
- "Enable Plane Trim": expand description.
- "Make curve path children to rotate along the path": remove "to".
- "Option for curve-deform: make deformed child to stretch along
entire path": remove "to".
- "... apply the curve radius with path following it and deforming":
rephrase unclear description.
- "Custom light falloff curve" : unrelated to lights, used in Grease
Pencil modifiers.
- "Grease Pencil layer assigned to the generated strokes": rephrase
because a GP stroke is assigned to a layer, not the other way
around.
- "Attribute domain where the attribute domain is stored in the
simulation state": remove second "domain" (typo).
Pull Request: https://projects.blender.org/blender/blender/pulls/107916
Regression in [0] which caused the window to be NULL when the load_post
handler was called. While this can be worked around using
context.temp_override, keep the previous behavior as this
change wasn't intentional.
[0]: 46be42f6b1
