Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
source/blender/freestyle wasn't fillowing Blender's own
conventions for integer types.
This had the down-side of making the code_clean.py utility attempt to
replace `unsigned int` types which always failed.
While this edit could have been manually ignored for all files in
freestyle, add the typedef's to `FreestyleConfig.h` and follow Blender's
convention instead.
The goal is to make it more explicit and centralized operation to
assign and steal buffer data, with proper ownership tracking.
The buffers and ownership flags are wrapped into their dedicated
structures now.
There should be no functional changes currently, it is a preparation
for allowing implicit sharing of the ImBuf buffers. Additionally, in
the future it is possible to more buffer-specific information (such
as color space) next to the buffer data itself. It is also possible
to clean up the allocation flags (IB_rect, ...) to give them more
clear naming and not have stored in the ImBuf->flags as they are only
needed for allocation.
The most dangerous part of this change is the change of byte buffer
data from `int*` to `uint8_t*`. In a lot of cases the byte buffer was
cast to `uchar*`, so those casts are now gone. But some code is
operating on `int*` so now there are casts in there. In practice this
should be fine, since we only support 64bit platforms, so allocations
are aligned. The real things to watch out for here is the fact that
allocation and offsetting from the byte buffer now need an explicit 4
channel multiplier.
Once everything is C++ it will be possible to simplify public
functions even further.
Pull Request: https://projects.blender.org/blender/blender/pulls/107609
- Rename name/filename/path to filepath when it's used for full paths.
- Rename name/path to dirpath when it refers to a directory.
- Rename file to filepath or path (when it may be a file or dir).
- Rename ImBuf::name & anim::name to filepath.
Recent refactoring to use uint relied on indirect includes and precompiled
headers for uint to be defined. Explicitly include BLI_sys_types where this
type is used now.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
ImBuf types were getting stored as bitflags in a 32bit integer which had
already run out of space. Solved the problem by separating file type to
an ftype enum, and file specific options to foptions.
Reviewed by Campbell, thanks a lot!
The issue was caused by including both Python.h and BLI_math.h. Since the macro
definition in Python.h was unconditional, it was necessary to include it first and then
BLI_math.h.
Addressing the issue turned out to affect many Freestyle source files. There were several
other coding flaws that complicated the situation:
1. intern/system/FreestyleConfig.h was abused just to include BLI_math.h which was in
fact unnecessary in FreestyleConfig.h. While addressing this, inclusion of both math.h
and BLI_math.h had to be duly dealt with to avoid a compiler error about round().
2. #include <Python.h> was not properly put in the extern "C" { ... } construct.
3. intern/view_map/Interface0D.h and intern/python/Director.h, both of which included
Python.h, were included from within Freestyle header files that were almost or completely
independent of Python. These non-Python header files were used everywhere in the
Freestyle code base, causing many cases of the reported macro redefinitions.
4. The Director.h file was also declaring 'using namespace Freestyle', which was causing
another scope issue in several Freestyle header files.
This commit is intended to address the first problem above. Subsequent commits will deal
with the other three.
A crash in the Freestyle renderer was reported by Ton on IRC with a stack trace
below. Note that #2 is in Freestyle, whereas #1 is in the compositor. The problem
was observed in a debug build on OS X 10.7 (gcc 4.2, openmp disabled, no llvm).
----------------------------------------------------------------------
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: 13 at address: 0x0000000000000000
[Switching to process 72386 thread 0xf303]
0x0000000100c129f3 in NodeBase::~NodeBase (this=0x10e501c80) at COM_NodeBase.cpp:43
43 delete (this->m_outputsockets.back());
Current language: auto; currently c++
(gdb) where
#0 0x0000000100c129f3 in NodeBase::~NodeBase (this=0x10e501c80) at COM_NodeBase.cpp:43
#1 0x0000000100c29066 in Node::~Node (this=0x10e501c80) at COM_Node.h:49
#2 0x000000010089c273 in NodeShape::~NodeShape (this=0x10e501c80) at NodeShape.cpp:43
#3 0x000000010089910b in NodeGroup::destroy (this=0x10e501da0) at NodeGroup.cpp:61
#4 0x00000001008990cd in NodeGroup::destroy (this=0x10e5014b0) at NodeGroup.cpp:59
#5 0x00000001008990cd in NodeGroup::destroy (this=0x114e18da0) at NodeGroup.cpp:59
#6 0x00000001007e6602 in Controller::ClearRootNode (this=0x114e19640) at Controller.cpp:329
#7 0x00000001007ea52e in Controller::LoadMesh (this=0x114e19640, re=0x10aba4638, srl=0x1140f5258) at Controller.cpp:302
#8 0x00000001008030ad in prepare (re=0x10aba4638, srl=0x1140f5258) at FRS_freestyle.cpp:302
#9 0x000000010080457a in FRS_do_stroke_rendering (re=0x10aba4638, srl=0x1140f5258) at FRS_freestyle.cpp:600
#10 0x00000001006aeb9d in add_freestyle (re=0x10aba4638) at pipeline.c:1584
#11 0x00000001006aceb7 in do_render_3d (re=0x10aba4638) at pipeline.c:1094
#12 0x00000001006ae061 in do_render_fields_blur_3d (re=0x10aba4638) at pipeline.c:1367
#13 0x00000001006afa16 in do_render_composite_fields_blur_3d (re=0x10aba4638) at pipeline.c:1815
#14 0x00000001006b04e4 in do_render_all_options (re=0x10aba4638) at pipeline.c:2021
----------------------------------------------------------------------
Apparently a name conflict between the two Blender modules is taking place.
The present commit hence intends to address it by putting all the Freestyle C++
classes in the namespace 'Freestyle'. This revision will also prevent potential
name conflicts with other Blender modules in the future.
Special thanks to Lukas Toenne for the help with C++ namespace.
on the console during Freestyle rendering. The debug prints are turned off
by default now. Errors are still printed on the console.
A patch set implementing this functionality was provided by Bastien Montagne.
Many thanks! :)
1. instantiates the config path, the controller and the view
2. sets the controller’s view
3. loads a 3ds file (right now a fixed file)
4. inserts a style module (right now, also fixed)
5. computes the view map
The next and final step is running the Python script. A lot of information are fixed and should be changed to test the following code: see source/blender/freestyle/app_blender/*.cpp and search for fixed paths (starting in /Users/).
I am currently evaluating whether it's worth making Python run on its own environment (right now, the program crashes because of PyImport_AddModule) or whether it should use Blender's Python capabilities. Also, I need to figure out how to integrate the SWIG wrapper dynamic library into the current scheme.
