EEVEE can bind layers of a texture that is also used as an attachment. When binding
the image layout of these specific layers can be different that the image layout of
the whole image.
This fixes the known synchronization issues inside EEVEE. wasp_bot, tree_creature and
wanderer scenes can be rendered without any synchronization issue reported by the
Vulkan validation layers.
Design task: #124214
When beginning to render the attachments are being evaluated. If there is an arrayed
texture (with multiple layers) the individual layers of that texture can be tracked
during until the rendering is ended.
When the same texture is bound to a shader it will be a different layer (otherwise
there is a feedback loop, which isn't allowed). The bound layers will typically need
a different layout the transition to the new layout is executed and recorded. When
the rendering ends, the layers are transitioned back to the layout the texture is
expected in.
It can happen that a layer is used multiple times during the same rendering. In
that case the rendering should be suspended to perform the transition. Image layout
transitions are not allowed during rendering.
There is one place where a layer needs to be transited multiple times that is when
EEVEE wants to extract the thickness from the shadow. The thickness is stored inside
the gbuffer_normal which is also used as an attachment. Eval then samples the thickness
from the gbuffer_normal as a sampler. To work around this issue we suspend the rendering
when a `GPU_BARRIER_SHADER_IMAGE_ACCESS` is signaled.
Pull Request: https://projects.blender.org/blender/blender/pulls/124407
color was not taken into consideration when picking a closure using
reservoir sampling, giving closures with dark color much higher weights
than they should have.
This fix multiplies the weight by the average color when picking the
closure, similar as what has been done in principled BSDF.
Pull Request: https://projects.blender.org/blender/blender/pulls/124730
This PR will share render graphs between all contexts that run in
the same thread. This allows the draw manager commands to be added
to the same render graph as the UI.
- Fixes debug groups hiearchy. Draw manager would restart a hierarchy as
it wasn't aware of the debug groups already added by the UI
- Removes cpu sync when switching between contexts.
In a future change this is needed to improve discarding resources.
Pull Request: https://projects.blender.org/blender/blender/pulls/124715
The array-length of a texture view isn't stored at the same location as
the array-base and was forgotten that it was a feature what had to be
supported.
Detected when testing `monster.blend` where the SSS object id wasn't
set and lead to missing materials.
**Before**
**After**
Pull Request: https://projects.blender.org/blender/blender/pulls/124590
Function `strip_data_outline_params_set()` was simplified, so setting
color and outline parameters are not mixed and overwriting as code flows
and so the function is better readable.
Shader code is changed, so that when strip overlaps other strip, it gets
2 px red outline regardless of whether it is active or selected. This
makes it more consistent when strip is not active or selected.
Pull Request: https://projects.blender.org/blender/blender/pulls/124442
The BLI_spin APIs use a `SpinLock` typedef whose underlying type is
contingent on the precense of `WITH_TBB`. Since our projects did not
consistently define the `WITH_TBB` definition, multiple `SpinLock` types
would end up in our final binary creating ODR violations.
Pull Request: https://projects.blender.org/blender/blender/pulls/124285
This adds support for attaching gizmos for input values. The goal is to make it
easier for users to set input values intuitively in the 3D viewport.
We went through multiple different possible designs until we settled on the one
implemented here. We picked it for it's flexibility and ease of use when using
geometry node assets. The core principle in the design is that **gizmos are
attached to existing input values instead of being the input value themselves**.
This actually fits the existing concept of gizmos in Blender well, but may be a
bit unintutitive in a node setup at first. The attachment is done using links in
the node editor.
The most basic usage of the node is to link a Value node to the new Linear Gizmo
node. This attaches the gizmo to the input value and allows you to change it
from the 3D view. The attachment is indicated by the gizmo icon in the sockets
which are controlled by a gizmo as well as the back-link (notice the double
link) when the gizmo is active.
The core principle makes it straight forward to control the same node setup from
the 3D view with gizmos, or by manually changing input values, or by driving the
input values procedurally.
If the input value is controlled indirectly by other inputs, it's often possible
to **automatically propagate** the gizmo to the actual input.
Backpropagation does not work for all nodes, although more nodes can be
supported over time.
This patch adds the first three gizmo nodes which cover common use cases:
* **Linear Gizmo**: Creates a gizmo that controls a float or integer value using
a linear movement of e.g. an arrow in the 3D viewport.
* **Dial Gizmo**: Creates a circular gizmo in the 3D viewport that can be
rotated to change the attached angle input.
* **Transform Gizmo**: Creates a simple gizmo for location, rotation and scale.
In the future, more built-in gizmos and potentially the ability for custom
gizmos could be added.
All gizmo nodes have a **Transform** geometry output. Using it is optional but
it is recommended when the gizmo is used to control inputs that affect a
geometry. When it is used, Blender will automatically transform the gizmos
together with the geometry that they control. To achieve this, the output should
be merged with the generated geometry using the *Join Geometry* node. The data
contained in *Transform* output is not visible geometry, but just internal
information that helps Blender to give a better user experience when using
gizmos.
The gizmo nodes have a multi-input socket. This allows **controlling multiple
values** with the same gizmo.
Only a small set of **gizmo shapes** is supported initially. It might be
extended in the future but one goal is to give the gizmos used by different node
group assets a familiar look and feel. A similar constraint exists for
**colors**. Currently, one can choose from a fixed set of colors which can be
modified in the theme settings.
The set of **visible gizmos** is determined by a multiple factors because it's
not really feasible to show all possible gizmos at all times. To see any of the
geometry nodes gizmos, the "Active Modifier" option has to be enabled in the
"Viewport Gizmos" popover. Then all gizmos are drawn for which at least one of
the following is true:
* The gizmo controls an input of the active modifier of the active object.
* The gizmo controls a value in a selected node in an open node editor.
* The gizmo controls a pinned value in an open node editor. Pinning works by
clicking the gizmo icon next to the value.
Pull Request: https://projects.blender.org/blender/blender/pulls/112677
Moving a strip retiming key at the end of a strip, so that a strip
overlaps another one would leave them overlapped. The expected
behavior is that it acts according to the Overlap Mode, like it does
when moving a strip.
Co-authored-by: Richard Antalik <richardantalik@gmail.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/124424
The math render tests were not passing on the AMD hardware.
This was due to some compiler behavior not returning 1
on the `floor((a - c) / (b - c))` calculation even if
`a` and `b` were equal.
When clearing depth attachment the write depth state should be enabled.
When this isn't the case a clear texture is being performed. Before
the render graph this used to be a performance issue as the rendering
would be suspended.
The render graph currently reorders these texture clears before of
the rendering context and therefore isn't seen as a performance issue.
Pull Request: https://projects.blender.org/blender/blender/pulls/124340
Instead of making the dark outline be bright for active but unselected
strips, make it have dark outline just like all other strips,
and a 1px inner bright line inside of that.
Pull Request: https://projects.blender.org/blender/blender/pulls/124210
This PR adds device statistics which can be printed to the console.
By default nothing is printed, but developer can choose to enable
it during development.
Pull Request: https://projects.blender.org/blender/blender/pulls/124150
EEVEE Eval light shader could still make a collision between
texture and image bind space making rendering glitch
when not using `--debug-gpu`. The problem was that the bind space
wasn't aware of the offset that the shader interface was using.
Pull Request: https://projects.blender.org/blender/blender/pulls/124140
Don't store pointers to `blender::Map` items since, unlike `std::map`,
they're not guaranteed to stay valid.
This resulted in shader binaries being loaded into the wrong
specialization.
Pull Request: https://projects.blender.org/blender/blender/pulls/124051
Barycentric coordinates are used for the wireframe shader. It was
already implemented, but was made broken or when we change the depth
range or when we added support for fallback of shader viewport/layer
rendering. The previous implementation didn't use the correct
EmitVertex leading to incorrect depths. Also the shader layouts where
not Vulkan compliant.
Pull Request: https://projects.blender.org/blender/blender/pulls/124048
HiZ update performs a read/write on different buffers, this lead
to write-after-write hazards as the resources where added multiple
times in the same pipeline barrier with different access masks.
This is fixed by merging pipeline barriers based on their resource.
Pull Request: https://projects.blender.org/blender/blender/pulls/124036
Adds debug print function to output a node with its inputs and outputs.
Also keep track of the name of the resource (only images) what will
be presented. Tracking of the resource name is only done in debug builds.
Pull Request: https://projects.blender.org/blender/blender/pulls/124033
When performing framebuffer transition on legacy opengl platforms, some
state was uninitialized. Resulting in incorrect behavior and crashes.
Note that this doens't fix the black cube on legacy platforms. With this PR we
might be able to reproduce the issue on modern HW.
Pull Request: https://projects.blender.org/blender/blender/pulls/123989
Setting this option to a value above zero replaces the lambertian Diffuse term
with the modified energy-preserving Oren-Nayar BSDF, which matches the OpenPBR
behavior.
Pull Request: https://projects.blender.org/blender/blender/pulls/123616
When copying the depth aspect of a depth+stencil image the incorrect
barriers where created. The barrier needs to have the full aspect, even
when we only copy a single aspect from the image.
Pull Request: https://projects.blender.org/blender/blender/pulls/123890
* Better separation between drawing backdrop and main line.
* Pass u and v coordinates of line to fragment shader for further processing.
* Remove `colorGradient` which can also be computed from `lineUV`.
* Simplify drawing potentially more than one parallel line as is done in #112677.
When a buffer resource was read, and after that read from another
shader stage it would not generate the appropriate pipeline barrier.
This is fixed by keeping the last write action around and check
if the shader stage was already included in the previous barriers.
Pull Request: https://projects.blender.org/blender/blender/pulls/123845
Draw Manager visibility compute shader triggered a read-after-write
hazard. This root cause was that the incorrect access was read from
the shader interface. It was set to none, skipping the needed pipeline
barrier.
Pull Request: https://projects.blender.org/blender/blender/pulls/123839
