In order to copy vertex group weights when subdividing strokes the
groups (`bDeformGroup`) must be created in advance, so that the attribute
wrappers correctly write to `CD_MDEFORMVERT` layer instead of creating simple
`CD_PROP_FLOAT` layers.
In addition the subdivision function must take care to fully write the
destination arrays, since initial values must be considered uninitialized (this
is obfuscated for simple CustomData arrays but breaks with more complex
attributes that use a buffer). In order to ensure fully defined destination
buffers without additional copies, the `finish` call to attribute writers is
postponed until the unselected attribute values have also been copied from input
buffers and all the values are properly defined.
Pull Request: https://projects.blender.org/blender/blender/pulls/132854
Only enable by default dynamic rendering local read on Qualcomm devices. NVIDIA, AMD and Intel
performance is better when disabled (20%). On Qualcomm devices the improvement can be
substantial (16% on shader_balls.blend).
`--debug-gpu-vulkan-local-read` can be used to use dynamic rendering local read on any
supported platform.
Future: Check if bottleneck is during command building. If so we could fine-tune this after the
device command building landed (#T132682).
Pull Request: https://projects.blender.org/blender/blender/pulls/132981
Don't change the object's active material when adding a material slot. This
active material will be used by brushes with no pinned material, while the
added slot is meant for the pinned material.
The if-statement in `BKE_grease_pencil_object_material_ensure_from_brush()`
would change the active unpinned material, even though it was only meant to
handle the pinned material. This was not a new issue, it was just unlikely to
run into it.
Before brush assets were introduced this if-statement would not be
executed when activating any of the default brushes. Afterwards it would
be, because the material was newly linked (because the brush asset was
linked) and so there was no material slot created for it yet.
Pull Request: https://projects.blender.org/blender/blender/pulls/132865
Similar to other visibility properties, include "hide_viewport" in
collection properties tab. One issue is that, when collection is
disabled, automatically parent collection is selected or tab is gone
when parent collection does not exist. The check was added in
0a903e7ab1, it doesn't seem very useful so
removed that.
Pull Request: https://projects.blender.org/blender/blender/pulls/132107
Main goals of this refactor:
* Make it more obvious which update function should be used.
* Make it more obvious which parameters are required by using references instead
of pointers.
* Support passing in multiple modified trees instead of just a single one.
No functional changes are expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/132862
The `bNode.type_legacy` is still used in many places to check if a node is a
specific type. However, going forward it's better to rely more on the idname
than on this legacy integer type. Some more information is available in #132858.
The added utility method can be used like so:
`node->is_type("GeometryNodeMenuSwitch")`. Previously one would have written
`node->type_legacy == GEO_NODE_MENU_SWITCH`. The `is_type` method internally
checks that the passed in string is a valid node identifier to make it more
likely that we catch typos early.
Pull Request: https://projects.blender.org/blender/blender/pulls/132863
The new description for `bNode.type_legacy`:
```
/**
* Legacy integer type for nodes. It does not uniquely identify a node type, only the `idname`
* does that. For example, all custom nodes use #NODE_CUSTOM but do have different idnames.
* This is mainly kept for compatibility reasons.
*
* Currently, this type is also used in many parts of Blender, but that should slowly be phased
* out by either relying on idnames, accessor methods like `node.is_reroute()`.
*
* A main benefit of this integer type over using idnames currently is that integer comparison is
* much cheaper than string comparison, especially if many idnames have the same prefix (e.g.
* "GeometryNode"). Eventually, we could introduce cheap-to-compare runtime identifier for node
* types. That could mean e.g. using `ustring` for idnames (where string comparison is just
* pointer comparison), or using a run-time generated integer that is automatically assigned when
* node types are registered.
*/
```
Pull Request: https://projects.blender.org/blender/blender/pulls/132858
This removes the second to last usage of `NOD_static_types.hh` which we intend
to remove. A nice benefit is that the idname is now finally more explicit when a
node is registered. Previously it was difficult to search for the definition of
a node in the code when one had only the idname, which is the main identifier
for nodes.
The main change is in `node_type_base`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132815
- Prefer term "size" over "width" as this was used for the height.
- Simplify calculation for drawing the "+".
- Add note that the "+" is slightly off-center (ref #112653).
As part of an effort to remove this header, reducing the need for macro/
include magic and making node definitions more independent, move
the node UI name and description definitions to each node's file.
The UI name, description, and idname are also moved to std::string
instead of char arrays.
Similar to b43e2168e3.
Pull Request: https://projects.blender.org/blender/blender/pulls/132708
Make the type structs non-trivial, use new and delete for allocation and
freeing, and use std::string for most strings they contain. Also use
StringRef instead of char pointers in a few places. Mainly this improves
ergonomics when working with the strings.
Pull Request: https://projects.blender.org/blender/blender/pulls/132750
UnitSettings::scale_length was used to scale reported
values for operators (translate, shrink-fatten, voxel-size).
This isn't expected as the value isn't editable when the unit-system
is set to None.
Add BKE_unit_value_as_string_scaled utility function for clarity &
to ensure scaling is only applied when it should be.
Split the versioning of legacy Actions to slotted ones into two steps:
1. Versioning the Actions themselves, in the regular versioning code
(`do_versions_after_linking_400`). This has to happen in the 'after
linking' stage, and not in the 'before linking' stage, as there's
older 'after linking' code that will break when it gets fed slotted
actions. Any ID that is using a legacy Action will get tagged.
2. Versioning Action assignments, where the correct Action Slot has to
be chosen & assigned for each tagged ID. This has to happen in the
`do_versions_after_setup` stage, as choosing a slot requires that the
actions (both local & linked) have been converted already.
This also includes some necessary changes to the pre-2.50 Action versioning
code.
Note that this change does not handle library overrides. That's dealt
with in !131426.
Pull Request: https://projects.blender.org/blender/blender/pulls/131627
The code for converting pre-Animato actions was not getting run properly
because `chanbase` (where animation data used to be stored) was
erroneously getting cleared before the relevant versioning code was run.
The root cause was that the code checking whether an action was already
valid as a layered action or not was NOT confirming that `chanbase` was
empty as part of that check (as it is a DNA-deprecated field), which in
turn triggered code that defensively clears `chanbase` (among other
things) when an action is identified as layered.
Note that the conversion of IPO curves and other pre-Animato data
happens quite late in the versioning, even _after_ the "versioning after
linking" stage. This is not introduced in this commit, this is just to
illuminate pre-existing design that might not be entirely obvious.
Pull Request: https://projects.blender.org/blender/blender/pulls/131975
Reason is that `BKE_camera_view_frame_fit_to_scene` cannot handle grease
pencil data [it used to, that was once added in 80d0b68290 but lost in
the switch to GPv3 (see 5c57e24fea)].
So to resolve, add back support for grease pencil in
`BKE_camera_view_frame_fit_to_scene` which is similar to what we do for
getting the bounding box.
Pull Request: https://projects.blender.org/blender/blender/pulls/132733
When using clangd or running clang-tidy on headers there are
currently many errors. These are noisy in IDEs, make auto fixes
impossible, and break features like code completion, refactoring
and navigation.
This makes source/blender headers work by themselves, which is
generally the goal anyway. But #includes and forward declarations
were often incomplete.
* Add #includes and forward declarations
* Add IWYU pragma: export in a few places
* Remove some unused #includes (but there are many more)
* Tweak ShaderCreateInfo macros to work better with clangd
Some types of headers still have errors, these could be fixed or
worked around with more investigation. Mostly preprocessor
template headers like NOD_static_types.h.
Note that that disabling WITH_UNITY_BUILD is required for clangd to
work properly, otherwise compile_commands.json does not contain
the information for the relevant source files.
For more details see the developer docs:
https://developer.blender.org/docs/handbook/tooling/clangd/
Pull Request: https://projects.blender.org/blender/blender/pulls/132608
This patch redesigns the Glare node to improve the user experience. The
improvements are as follows.
Two new outputs were added, Glare and Highlights. The Glare output gives
the generated glare without the input, and is useful when the user wants
to adjust the glare before adding it to the image. The Highlights output
gives the areas that are considered highlights when computing the glare,
and is useful if the user wants to temporally check the highlights while
doing adjustments or wants to use those as a base for creating a custom
glare setup.
The Mix node option was removed and a new Strength single value input
was added to serve the same functionality. The Mix option had a range of
[-1, 1], where the [-1, 0] sub-range essentially controlled the strength
of the glare, 0 being full strength and -1 being zero strength. While
the [0, 1] range returned the generated glare with an attenuated version
of the image added, that is, it was useless except for the value of 1,
which returned the generate glare only.
Aside from being a very intuitive range, it also meant that the power of
glare can't be boosted beyond the full strength of, you guessed it, 0.
The newly added Strength input has a soft range of [0, 1] and can be
boosted beyond 1. If the users want the glare only, they can use the
newly provided Glare output.
The Size node option used for Bloom and Fog Glow was removed and a new
Size single value input was added. The Size node option had yet another
very intuitive range of [1, 9], and it was related exponentially to the
actual size of the Glare. For Bloom, the actual bloom size relative to
the image was 2^(Size-9), so a Size of 8 means the bloom covers half of
the image. For Fog Glow, the actual bloom size in pixels is 2^Size, so
the glare size is not relative to the image size and would thus change
as the image resolution change. Furthermore, the maximum possible glare
size was 512 pixels, and the user couldn't make fine adjustments to the
size.
The newly added Size input has a range [0, 1], where 1 means the glare
covers the entire image, 0.5 means it covers half the image, and so on.
That means it is consistent between Bloom and Fog Glow, it is relative
to the image size, it allows as large of a glare as possible, it is
continuous for Fog Glow, but not for Bloom because that requires an
algorithmic change that will be implemented separately.
The Threshold, Streaks, Streaks Angle, Iterations, Fade, and Color
Modulation node option was turned into a single value node input to
allow the option to be used in node groups.
---
Versioning was added to transfer node options into sockets, but it is
not all 1:1 versioning, since the old Size option was not relative to
the image size, so it depends on runtime information of the input size.
As a guess, we assume the render size in that case. Versioning the
[0, 1] range of the Mix option intentionally omits the attenuation of
the image input, because that is almost certainly not what the user
wants and was probably done thinking it controls the strength.
Glare code now sets the alpha channel to 1, that's because it was
already ignored in the mixing step, but now that we expose the Glare
output, we need to set it to 1. So this is not a functional change.
The get_glare_size() method was renamed for clarity since it now
conflicts with the newly added Size input.
---
This is a partial implementation of #124176 to address #131325. In
particular, it adjust existing functionality, it doesn't add any new
ones. Those will be added in separate patches.
Pull Request: https://projects.blender.org/blender/blender/pulls/132499
The issue was that the propagation of referenced anonymous attributes treated
geometry outputs of the foreach zone as "normal". That means that every
anonymous attributes referenced by the input socket would also be referenced by
the output socket.
However, just like in the repeat zone, this so called "propagate relation" needs
some special behavior, because anonymous attributes references created inside a
zone have to remain inside that zone. Instead, the output node creates a new
anonymous attribute reference that is used outside of the zone.
Note, this is the same as #132560 but also implements the right-to-left pass,
whereas before only the left-to-right pass was implemented.
Pull Request: https://projects.blender.org/blender/blender/pulls/132607
There were two separate issues which have a very similar solution:
* When loading the .blend file, the `scene->rigid_body_world->group` collection
pointer has to be mapped to the actual address. However, that was not done
because `BKE_rigidbody_world_id_loop` was a stub when `WITH_BULLET` is off.
That resulted in the collection pointer having an invalid address.
* When closing the file, there was some issue because of incomplete code for
copying rigid body related stuff for the depsgraph and hence there was some
unexpectedly shared ownership which leads to a use-after-free. Here the fix is
to move the copy code out of a `#ifdef WITH_BULLET` block too.
Since none of the moved code actually needs bullet, it seems fine to move it.
The code should be exactly the same in the common case with `WITH_BULLET` is on.
Pull Request: https://projects.blender.org/blender/blender/pulls/132697
This renames the struct `Sequence` to `Strip`.
While the motivation for this partially comes from
the "Sequence Design" #131329, it seems like this
is a good refactor whether the design gets implemented
or not.
The `Sequence` represents what users see as strips in the
VSE. Many places in the code already refere to a `Sequence`
as "strip". It's the C-style "base class" of all strip types.
This also renames the python RNA type `bpy.types.Sequence`
to `bpy.types.Strip` which means that this technically breaks
the python API.
Pull Request: https://projects.blender.org/blender/blender/pulls/132179
Move the `ID_TAG_ID_LINK_PLACEHOLDER` bit of `id->tag` to
`id->runtime.readfile_data->tags.is_id_link_placeholder`. It also
introduces the necessary stucts and allocation/freeing code.
Old code:
```cpp
if (id_tag & ID_TAG_ID_LINK_PLACEHOLDER) {
```
New code:
```cpp
if (readfile_id_runtime_tags(id).is_id_link_placeholder) {
```
where `readfile_id_runtime_tags(id)` is a getter for
`id->runtime.readfile_data->tags` that is null-safe for
`id->runtime.readfile_data`. The `readfile_data` is not allocated in
these cases:
1. When reading undo steps, because that doesn't have to deal with
versioning or linking (which are the sole purposes for this
struct).
2. When linking from another file (for example from the 'Link...'
operator). The just-linked IDs will have the `readfile_data`
struct, but already-loaded IDs will already have had those freed.
No functional changes intended.
Pull Request: https://projects.blender.org/blender/blender/pulls/132169
Design Task: #131695
The issue was that the propagation of referenced anonymous attributes treated
geometry outputs of the foreach zone as "normal". That means that every
anonymous attributes referenced by the input socket would also be referenced by
the output socket.
However, just like in the repeat zone, this so called "propagate relation" needs
some special behavior, because anonymous attributes references created inside a
zone have to remain inside that zone. Instead, the output node creates a new
anonymous attribute reference that is used outside of the zone.
Pull Request: https://projects.blender.org/blender/blender/pulls/132560
Only draw relationship lines between a constrained object/bone and its
target when there is actually a valid target. Previously Blender would
always draw a line, which would go to the world origin when the
constraint has no target. This was visually rather noisy and potentially
even misleading when there is actually an object at the origin.
Fixes#131477
Pull Request: https://projects.blender.org/blender/blender/pulls/132592
