Seems to work OK in basic cases, but needs more work when copying
outside of Main at least.
Note: There is no behavioral changes expected from this commit.
Note that there are at least two known usecases for this change:
* Liboverrides, as with recursive resync and proxies conversion it
often ends up creating 'virtual' linked data that does not actually
exists in the library blend files.
* Complex versionning code (`do_versions_after_setup`) when it needs
to create new IDs (currently handling linked data that way is just not
supported!).
Implements #107847.
There probably are more cases where crash will happen as it is
rooting into the issue with BKE_object_workob_calc_parent() which
is used in multiple places.
The issue is caused by the access to a runtime field of workob
outside of the BKE_object_workob_calc_parent(): the runtime field
is stack-allocated in the function, and can not be accessed outside
of the function.
The easiest way to reproduce is to use ASAN, and parent mesh to an
armature with automatic weights. Although, on macOS ASAN did not
report issues, so setting workob->runtime to nullptr at the end of
of the BKE_object_workob_calc_parent() was the easiest.
The solution is simple: make the function to return the matrix,
and take care of the working object inside of it, so all tricky
parts are hidden from the API.
The patch is targeting the main branch, as in 4.1 it is not
required to do such change because all uses of the function only
access object_to_world, which is stored in the object in 4.1.
A double-check in the what_does_obaction() might be needed as it
follows the similar pattern, but it does not seem that runtime
field of the workob is accessed in usages of the what_does_obaction().
Pull Request: https://projects.blender.org/blender/blender/pulls/118847
This rewrites the Alembic and USD data importers to work with and
output GeometrySets instead of Meshes.
The main motivation for this change is to be able to import properly
point clouds, which are currently imported as Meshes, and curves
data, which suffer from a lot of issues due to limitations of
legacy curves structures (fixed by the new curves data-block) and are
also converted to Meshes. Further, for Curves, it will allow importing
arbitrary attributes.
This patch was primarily meant for Alembic, but changes to USD import
were necessary as they share the same modifier.
For Alembic:
There should be no behavioral changes for Meshes
Curves are imported as the new Curves object type
Points are imported as PointClouds
For USD:
There should be no behavioral changes for Meshes
Curves are imported as the new Curves object type
Note that the current USD importer does not support loading PointClouds,
so this patch does not add support for it.
For both Alembic and USD, knots arrays are not read anymore, as the new
Curves object does not expose the ability to set them. Improvements can
be made in the future if and when example assets are provided.
This fixes at least the following:
#58704: Animated Alembic curves don't update on render
#112308: Curves have offset animations (alembic / USD)
#118261: wrong motion blur from usd in cycles and reverting to the first
frame when disabeling motion blur
Co-authored-by: Jesse Yurkovich <jesse.y@gmail.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/115623
The depsgraph CoW mechanism is a bit of a misnomer. It creates an
evaluated copy for data-blocks regardless of whether the copy will
actually be written to. The point is to have physical separation between
original and evaluated data. This is in contrast to the commonly used
performance improvement of keeping a user count and copying data
implicitly when it needs to be changed. In Blender code we call this
"implicit sharing" instead. Importantly, the dependency graph has no
idea about the _actual_ CoW behavior in Blender.
Renaming this functionality in the despgraph removes some of the
confusion that comes up when talking about this, and will hopefully
make the depsgraph less confusing to understand initially too. Wording
like "the evaluated copy" (as opposed to the original data-block) has
also become common anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118338
This data was 'hidden' away in a util in
`lib_query.cc`, which made it hard to discover and keep up-to-date.
However, as shown by e.g. #108407, critical low-level features in ID
management code, such as remapping, now rely on this information being
valid.
Also simplify `BKE_library_id_can_use_filter_id` and
`BKE_library_id_can_use_idtype` to make them more generic, relying on
IDTypeInfo to retrieve IDtype-specific info.
No behavioral changes expected here.
The `object_to_world` and `world_to_object` matrices are set during
depsgraph evaluation, calculated from the object's animated location,
rotation, scale, parenting, and constraints. It's confusing and
unnecessary to store them with the original data in DNA.
This commit moves them to `ObjectRuntime` and moves the matrices to
use the C++ `float4x4` type, giving the potential for simplified code
using the C++ abstractions. The matrices are accessible with functions
on `Object` directly since they are used so commonly. Though for write
access, directly using the runtime struct is necessary.
The inverse `world_to_object` matrix is often calculated before it's
used, even though it's calculated as part of depsgraph evaluation.
Long term we might not want to store this in `ObjectRuntime` at all,
and just calculate it on demand. Or at least we should remove the
redundant calculations. That should be done separately though.
Pull Request: https://projects.blender.org/blender/blender/pulls/118210
I added a new BLO_userdef_default.h header to contain declarations of
two global variables that are still defined in C files. Use of designated
initializers for large structs make those files harder to change.
Arguably this is a better header for them anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118015
Since 1497005054, there is a new `ModifierData.persistent_uid` which
has more use cases than the old `session_uid`. This patch removes
`ModifierData.session_uid` and replaces its usages with the new `persistent_uid`.
Pull Request: https://projects.blender.org/blender/blender/pulls/117909
This adds a new `ModifierData.persistent_uid` integer property with the following properties:
* It's unique within the object.
* Match between the original and evaluated object.
* Stable across Blender sessions.
* Stable across renames and reorderings of modifiers.
Potential use-cases:
* Everywhere where we currently use the name as identifier. For example,
`ModifierComputeContext` and `ModifierViewerPathElem`.
* Can be used as part of a key in `IDCacheKey` to support caches that stay
in-tact across undo steps.
* Can be stored in the `SpaceNode` to identify the modifier whose geometry node
tree is currently pinned (this could use the name currently, but that hasn't been
implemented yet).
This new identifier has some overlap with `ModifierData.session_uid`, but there
are some differences:
* `session_uid` is unique within the entire Blender session (except for duplicates
between the original and evaluated data blocks).
* `session_uid` is not stable across Blender sessions.
Especially due to the first difference, it's not immediately obvious that the new
`persistent_uid` can fulfill all use-cases of the existing `session_uid`. Nevertheless,
this seems likely and will be cleaned up separately.
Unfortunately, there is not a single place where modifiers are added to objects currently.
Therefore, there are quite a few places that need to ensure valid identifiers. I tried to catch
all the places, but it's hard to be sure. Therefore, I added an assert in `object_copy_data`
that checks if all identifiers are valid. This way, we should be notified relatively quickly if
issues are caused by invalid identifiers.
Pull Request: https://projects.blender.org/blender/blender/pulls/117347
This simplifies code using these functions because of RAII,
range based for loops, and the lack of output arguments.
Also pass object pointer array as a span in more cases.
Pull Request: https://projects.blender.org/blender/blender/pulls/117482
`UUID` generally stands for "universally unique identifier". The session identifier that
we use is neither universally unique, nor does it follow the standard. Therefor, the term
"session uuid" is confusing and should be replaced.
In #116888 we briefly talked about a better name and ended up with "session uid".
The reason for "uid" instead of "id" is that the latter is a very overloaded term in Blender
already.
This patch changes all uses of "uuid" to "uid" where it's used in the context of a
"session uid". It's not always trivial to see whether a specific mention of "uuid" refers
to an actual uuid or something else. Therefore, I might have missed some renames.
I can't think of an automated way to differentiate the case.
BMesh also uses the term "uuid" sometimes in a the wrong context (e.g. `UUIDFaceStepItem`)
but there it also does not mean "session uid", so it's *not* changed by this patch.
Pull Request: https://projects.blender.org/blender/blender/pulls/117350
This allows modifiers to have cache pointers that are preserved over undo steps.
I intend to use this for the baked data cache for the geometry nodes modifier.
Pull Request: https://projects.blender.org/blender/blender/pulls/117307
The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
The previous behavior, fairly rough, was simply considering all
Collections and IDs found as part of the root's hierarchy as to be
overridden.
The new behavior is based on a specific tag added to some ID usages.
Currently, these are only the links from a Collection to its Objects
and children Collections, and the link from an Object to its parent.
The goal of this huge reduction of the 'automatically overridden' set of
data in a hierarchy is to avoid creating liboverrides for 'utils' data,
e.g. a collection used as source of data by a GeometryNode generating
some parametric geometry (Blender Studio use-case: some form of LOD
handling).
In general, it means that only Collections and objects part of the
collection hierarchy of the root collection are now overridden.
This should not change in the typical recommended use-case so far (where
there is a clear root collection to the whole overridden hierarchy, and
it contains all related collections and objects).
But this should allow much less overhead (and viewport pollution, due to
the current principle that local (and therefore liboverridden) objects
have to be instanciated in a Scene) for more complex setups.
Note that the initial idea/change is fairly simple and easy to
implement, but it creates some additional complexity in the partial
resync code, since now some linked data may not be detected as needing
a liboverride anymore when processing a sub-hierarchy, while it would
require it when processing the whole hierarchy.
This required adding some more processing to the util functions which
define which ID should be overridden. It essentially creates a
'reference set' of all reference IDs that should be overridden when
the whole hierarchy is considered, and use this as additional input to
decide which ID to override when processing a sub-hierarchy for the
partial resync.
Pull Request: https://projects.blender.org/blender/blender/pulls/115853
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
Automatic memory management and clearer ownership! Requires
removing `MEM_CXX_CLASS_ALLOC_FUNCS` from `MeshRuntime`,
but that's used very inconsistently anyway, and `MeshRuntime` isn't
that large.
Implement the next phases of bounds improvement design #96968.
Mainly the following changes:
Don't use `Object.runtime.bb` for performance caching volume bounds.
This is redundant with the cache in most geometry data-block types.
Instead, this becomes `Object.runtime.bounds_eval`, and is only used
where it's actually needed: syncing the bounds from the evaluated
geometry in the active depsgraph to the original object.
Remove all redundant functions to access geometry bounds with an
Object argument. These make the whole design confusing, since they
access geometry bounds at an object level.
Use `std::optional<Bounds<float3>>` to pass and store bounds instead
of an allocated `BoundBox` struct. This uses less space, avoids
small heap allocations, and generally simplifies code, since we
usually only want the min and max anyway.
After this, to avoid performance regressions, we should also cache
bounds in volumes, and maybe the legacy curve and GP data types
(though it might not be worth the effort for those legacy types).
Pull Request: https://projects.blender.org/blender/blender/pulls/114933
Avoid the need to call the separate `BKE_mesh_wrapper_minmax` function
that dealt with the edit mesh wrapper. This makes the API inconsistent,
since other mesh functions don't implicitly deal with the wrapper.
But the bounds are a bit of a special case anyway in regard
to the GPU subdivision wrapper already, and this is much more
convenient in the rest of the refactors for #96968.
Use float3, float3x3, and Array for data used for mesh crazyspace
calculation. Propagate the change wherever necessary to not add
more casting to the old C types.
Because `ObjectRuntime` (and therefore `DEGObjectIterData`) became
non-trivial structs, the code that swaps iterators for RNA depsgraph
object iteration had to be changed a bit to be more friendly to C++
memory semantics.
Pull Request: https://projects.blender.org/blender/blender/pulls/114998
