This was reported as #93410 & fixed with [0] however the fix didn't
help for animated logic (with region overlap enabled).
Resolve by adding a function ED_region_visibility_change_update_ex which
is called by the animated and non-animated region hiding functions.
[0]: 8f69c91408
The depsgraph CoW mechanism is a bit of a misnomer. It creates an
evaluated copy for data-blocks regardless of whether the copy will
actually be written to. The point is to have physical separation between
original and evaluated data. This is in contrast to the commonly used
performance improvement of keeping a user count and copying data
implicitly when it needs to be changed. In Blender code we call this
"implicit sharing" instead. Importantly, the dependency graph has no
idea about the _actual_ CoW behavior in Blender.
Renaming this functionality in the despgraph removes some of the
confusion that comes up when talking about this, and will hopefully
make the depsgraph less confusing to understand initially too. Wording
like "the evaluated copy" (as opposed to the original data-block) has
also become common anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118338
fa6384eb39 introduced explicit setting of operator context as argument for
function `ED_region_panels_ex()`. However, this did not work correctly, because
`UiLayout` did not exist when `uiLayoutSetOperatorContext()` was called. This
has to be done in `ed_panel_draw()`.
Another issue is, that panel may be drawn, when mouse is over tool region,
which means, that `sequencer_tools_region_draw()` must look for whether
this is happening in preview or timeline region.
Pull Request: https://projects.blender.org/blender/blender/pulls/118292
I added a new BLO_userdef_default.h header to contain declarations of
two global variables that are still defined in C files. Use of designated
initializers for large structs make those files harder to change.
Arguably this is a better header for them anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118015
This simplifies code using these functions because of RAII,
range based for loops, and the lack of output arguments.
Also pass object pointer array as a span in more cases.
Pull Request: https://projects.blender.org/blender/blender/pulls/117482
The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
This adds support for so called "layout panels" which are panels that are created as part
of `uiLayout`. The goal is to make it easier to have expandable sections as part of a UI.
The initial use case for this are panels in the geometry nodes modifier. This patch provides
a better solution compared to what was attempted in #108565.
### Problems with Existing Approaches
Currently, there are two ways to create these expandable sections:
* One can define a new `Panel` type for each expandable section and use the `parent_id`
to make this a subpanel of another panel. This has a few problems:
* `uiLayout` drawing code is more scattered, because one can't just use a single function
that creates the layout for an entire panel including its subpanels.
* It does not work so well for dynamic amounts of panels (e.g. like what we need for
the geometry nodes modifier to organize the inputs).
* Typically, Blender uses a immediate-ui approach, but subpanels break that currently
and need extra handling.
* The order of panels is not very explicit.
* One can't interleave subpanels and other ui elements, subpanels always come at the
end of the parent panel.
* Custom solution using existing `uiLayout`. This is done in the material properties. It
also has a few problems:
* Custom solutions tend to work slightly different in different places. So the UI is less unified.
* Can't drag open/close multiple panels.
* The background color for subpanels does not change.
### Solution
A possible solution to all of these problems is to add support for panels to `uiLayout` directly:
```cpp
/* Add elements before subpanel. */
if (uiLayout *panel_layout = uiLayoutPanel(layout, ...)) {
/* Add elements in subpanel, but only of the panel is open. */
}
/* Add elements after subpanel. */
```
Integrating subpanels with `uiLayout` has some benefits:
* Subpanels are treated like any other sub-layout and don't have unnecessary boilerplate.
* It becomes trivial to have a dynamic number of potentially nested subpanels.
* Resolves all mentioned problems of custom subpanel solutions.
### Open/Close State
The most tricky thing is to decide where to store the open/close state. Ideally, it should
be stored in the `region` because then the same layout panel can be opened and closed
in every region independently. Unfortunately, storing the state in the region is fairly
complex in some cases.
For example, for modifier subpanels the region would have to store an open/close state
for each panel in each modifier in each object. So a map with
`object pointer + modifier id + panel id` as key would be required. Obviously, this map
could become quite big. Also storing that many ID pointers in UI data is not great and
we don't even have stable modifier ids yet. There also isn't an obvious way for how to
clear unused elements from the map which could become necessary when it becomes big.
In practice, it's rare that the same modifier list is shown in two editors. So the benefit of
storing the open/close state in the region is negligible. Therefor, a much simpler solution
is possible: the open/close state can be stored in the modifier directly. This is actually
how it was implemented before already (see `ui_expand_flag`).
The implementation of layout panels in this patch is *agnostic* to how the open/close
state is stored exactly, as long as it can be referenced as a boolean rna property. This
allows us to store the state in the modifier directly but also allows us to store the state
in the region for other layout panels in the future. We could consider adding an API that
makes it easy to store the state in the region for cases where the key is simpler.
For example: `uiLayoutPanel(layout, TIP_("Mesh Settings"), PanelRegionKey("mesh_settings"))`.
### Python API (not included)
Adding a Python API is fairly straight forward. However, it is **not** included in this patch
so that we can mature the internal API a bit more if necessary, before addon developers
start to depend on it. It would probably work like so:
```python
if panel := layout.panel("Mesh Settings", ...):
# Add layout elements in the panel if it's open.
```
Pull Request: https://projects.blender.org/blender/blender/pulls/113584
When the Asset shelf is active but hidden, the mouse cursor will give
feedback about a moveable edge above the asset shelf area. This just
alters `region_azone_edge_poll` to check for edges belonging to
regions that hide with a previous region that is now hidden.
Pull Request: https://projects.blender.org/blender/blender/pulls/116233
There are operators in Blender that allow the user to import multiple
files at the same time, however this functionality is only implemented
when importing with blender's file browser, drag and drop files only
takes first selected file.
The patch adds support for drag and drop multiple files.
Notes:
* The files are filtered according to the extension of the first
selected file.
* Not all operators that import files support importing multiple files,
so they will still import one.
* Changes must be made to allow importers to read all file paths.
This will be used in upcoming drag & drop import.
Pull Request: https://projects.blender.org/blender/blender/pulls/107230
Due to changes in the build environment shader_builder wasn't able to
compile on macOs. This patch reverts several recent changes to CMake files.
* dbb2844ed9
* 94817f64b9
* 1b6cd937ff
The idea is that in the near future shader_builder will run on the buildbot as
part of any regular build to ensure that changes to the CMake doesn't break
shader_builder and we only detect it after a few days.
Pull Request: https://projects.blender.org/blender/blender/pulls/115929
Use `continue` top move pre-conditions for the iteration to the
beginning of the loop, rather than making the entire block conditional.
Reduces cognitive complexity since the pre-conditions are handled
clearly and early.
Old code to prevent multiple overlapping regions at the same place,
wasn't handling the combination of bit flags and the alignment enum in a
single field correctly. Newly introduced flags for the asset shelf
exposed this.
Was asserting on startup for a Pets production file
(`010_0050.anim.blend`).
Steps to reproduce:
* Replace default cube with armature object
* Enter Pose Mode (makes asset shelf available for pose libraries)
* Hide 3D View header
Move the contents of `ANIM_bone_collections.h` into its C++
`ANIM_bone_collections.hh` sibling. Blender is C++ by now that we can do
without the C header.
No functional changes.
