Changes to the kernel source would not update the HIP RT binaries, leading
to render errors due to the kernel being mismatched with Blender.
The code this was copied from was inside a macro that defines the sources
variable, but it's not defined here.
Ref #109418
Pull Request: https://projects.blender.org/blender/blender/pulls/110073
Allows Win32 key repeat filtering to support multiple simultaneously
repeating keys, as can happen with modifiers. Removes
m_keycode_last_repeat_key and instead checks current down status.
Pull Request: https://projects.blender.org/blender/blender/pulls/109991
The `UCKeyTranslate` function was being used wrong.
The `deadKeyState` param should use `kUCKeyTranslateNoDeadKeysMask`
instead of `kUCKeyTranslateNoDeadKeysBit` (optionally could also use
`(1 << kUCKeyTranslateNoDeadKeysBit`)).
This commit also dispenses with accessing the keyAction, as this is not
crucial for determining the key.
Comments have also been added to better describe the code.
Pull Request: https://projects.blender.org/blender/blender/pulls/109987
Use modifier keys that are pressed before activating a new window.
Allows call of `wm_window_update_eventstate_modifiers` on
`GHOST_kEventWindowActivate` by using `GetAsyncKeyState` instead of
`GetKeyState` in GHOST_SystemWin32::getModifierKeys, which retrieves
actual hardware state.
Pull Request: https://projects.blender.org/blender/blender/pulls/110020
the initialization of m_pkts with an int threw an error with
17.7P3 since it decided int -> uint64_t required a narrowing
conversion. Not sure why it got picky here all of a sudden
but given it's not wrong, we may as well fix it properly.
This change changes the queueSize parameter to size_t and
adds a bounds check at the calling site to ensure the value
it gets will be positive before casting.
this option was already unselectable in the UI, and is treated as GGX
with zero roughness. Upon building the shader graph, we only convert a
closure to `SHARP` when option Filter Glossy is not used and the
roughness is below certain threshold. The benefit is that we can avoid
calling `bsdf_eval()` or return earlier in some cases, but the thresholds
vary across files.
This patch removes `SHARP` closures altogether, and checks if the
roughness value is below a global threshold `BSDF_ROUGHNESS_THRESH`
after blurring, in which case the flag `SD_BSDF_HAS_EVAL` is not set.
The global threshold is set to be `5e-7f` because threshold smaller than
that seems to have caused problem in the past (c6aa0217ac). Also removes
a bunch of functions, variables and arguments that were only there
because we converted closures under certain conditions.
Pull Request: https://projects.blender.org/blender/blender/pulls/109902
The Voronoi distance output is clamped at 8, which is apparent for distance
metrics like Minkowski with low exponents.
This patch fixes that by setting the initial distance of the search loop to
FLT_MAX instead of 8. And for the Smooth variant of F1, the "h" parameter is set
to 1 for the first iteration using a signal value, effectively ignoring the
initial distance and using the computed distance at the first iteration instead.
Pull Request: https://projects.blender.org/blender/blender/pulls/109286
There's quite a few libraries that depend on dna_type_offsets.h
but had gotten to it by just adding the folder that contains it to
their includes INC section without declaring a dependency to
bf_dna in the LIB section.
which occasionally lead to the lib building before bf_dna and the
header being missing, while this generally gets fixed in CMake by
adding bf_dna to the LIB section of the lib, however until last
week all libraries in the LIB section were linked as INTERFACE so
adding it in there did not resolve the build issue.
To make things still build, we sprinkled add_dependencies wherever
we needed it to force a build order.
This diff :
Declares public include folders for the bf_dna target so there's
no more fudging the INC section required to get to them.
Removes all dna related paths from the INC section for all
libraries.
Adds an alias target bf:dna to signify it has been updated to
modern cmake
Declares a dependency on bf::dna for all libraries that require it
Removes (almost) all calls to add_dependencies for bf_dna
Future work:
Because of the manual dependency management that was done, there is
now some "clutter" with libs depending on bf_dna that realistically
don't. Example bf_intern_opencolorio itself has no dependency on
bf_dna at all, doesn't need it, doesn't use it. However the
dna include folder had been added to it in the past since bf_blenlib
uses dna headers in some of its public headers and
bf_intern_opencolorio does use those blenlib headers.
Given bf_blenlib now correctly declares the dependency on bf_dna
as public bf_intern_opencolorio will get the dna header directory
automatically from CMake, hence some cleanup could be done for
bf_intern_opencolorio
Because 99% of the changes in this diff have been automated, this diff
does not seek to address these issues as there is no easy way to
determine why a certain dependency is in place. A developer will have
to make a pass a this at some later point in time. As I'd rather not
mix automated and manual labour.
There are a few libraries that could not be automatically processed
(ie bf_blendthumb) that also will need this manual look-over.
Pull Request: https://projects.blender.org/blender/blender/pulls/109835
Using area-preserving mapping from cone to disk. Has somewhat distortion
near 90°.
The texture rotates with the transformation of the light object, can
have negative and non-uniform scaling.
Pull Request: https://projects.blender.org/blender/blender/pulls/109842
When blender is not focused and a selection is executed
with the mouse, since there is no conversion from `wl_fixed` to `int`,
the bounds of the selection can cause the selection box to be too large,
causing `draw_select_framebuffer_depth_only_setup` to fail when create
`g_select_buffer.texture_depth`.
Ref !109834
So that there is some lighting when there are no lights in the scene,
and black when there are lights. This matches the behavior of other
Hydra renderers.
Ref #96731
* Use pi factor to convert between radiant flux and intensity
* Mark lights as normalized on export
* Add spot light export support
* Add treatAsPoint support for import and export
* Empirically match normalized distant light
* Fix wrong unnormalized point/sphere/disk light unit in Cycles
Overall it should be much closer now for all light types. Point and distant
light units are inconsistent between renderers, so not possible to match
everything there.
Ref #109404
Pull Request: https://projects.blender.org/blender/blender/pulls/109795
This fixes the issue described in https://projects.blender.org/blender/blender/issues/108957.
Instead of modeling distant lights like a disk light at infinity, it models them as cones. This way, the radiance is constant across the entire range of directions that it covers.
For smaller angles, the difference is very subtle, but for very large angles it becomes obvious (here's the file from #108957, the angle is 179°):
| Old | New |
| - | - |
|  |  |
One notable detail is the sampling method: Using `sample_uniform_cone` can increase noise, since the sampling method no longer preserves the stratification of the samples. This is visible in the "light tree multi distant" test scene.
Turns out we can do better, and after a bit of testing I found a way to adapt the concentric Shirley mapping to uniform cone sampling. I hope the comment explains the logic behind it reasonably well.
Here's the result, note that even the noise distribution is the same when using the new sampling:
| Method | Old | New, basic sampling | New, concentric sampling |
| - | - |- | - |
| Image |  |  |  |
| Render time (at higher spp)| 9.03sec | 8.79sec | 8.96sec |
I'm not sure if I got the `light->normalized` handling right, since I don't really know what the expectation from Hydra is here.
Co-authored-by: Weizhen Huang <weizhen@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/108996
The spotlight is now treated as a sphere instead of a view-aligned disk.
The implementation remains almost identical to that of a point light,
except for the spotlight attenuation and spot blend. There is no
attenuation inside the sphere. Ref #108505
Other changes include:
## Sampling
Instead of sampling the disk area, the new implementation samples either
the cone of the visible portion on the sphere or the spread cone, based
on which cone has a smaller solid angle. This reduces noise when the
spotlight has a large radius and a small spread angle.
| Before | After |
| -- | -- |
||
## Texture
Spot light can now project texture using UV coordinates.
<video src="/attachments/6db989d2-7a3c-4b41-9340-f5690d48c4fb"
title="spot_light_texture.mp4" controls></video>
## Normalization
Previously, the normalization factor for the spotlight was \(\pi r^2\),
the area of a disk. This factor has been adjusted to \(4\pi r^2\) to
account for the surface area of a sphere. This change also affects point
light since they share the same kernel type.
## Versioning
Some pipeline uses the `Normal` socket of the Texture Coordinate node for
projection, because `ls->Ng` was set to the incoming direction at the
current shading point. Now that `ls->Ng` corresponds to the normal
direction of a point on the sphere (except when the radius is zero),
we replace these nodes with a combination of the Geometry shader node
and the Vector Transform node, which gives the same result as before.
Example file see https://archive.blender.org/developer/T93676
Pull Request: https://projects.blender.org/blender/blender/pulls/109329
This introduces an alias target `bf::intern::atomic` for
`bf_intern_atomic`. This has the following benefits:
- Any target name with `::` in it will be recognized as an actual
target by cmake, rather than a library name it may not know about.
and will be validated by cmake to exist. Which means if you make
a typo in the LIB section, CMake will error out telling you it
doesn't know about this specific target rather than passing it on
to the build system, where you'll either get build or linker errors
because of said typo.
- Given there is quite a cleanup still to do in the build system,
it won't always be obvious which targets have been updated to
modern targets and which still need to be done. Having a namespaced
target name is a good indicator there.
Pull Request: https://projects.blender.org/blender/blender/pulls/109784
GHOST_ContextCGL used an incorrect compiler directive. When reading
the comment we could also remove it. In order to do the right thing
(fixing directive vs removing code) we opened this pull request to
ask feedback.
Pull Request: https://projects.blender.org/blender/blender/pulls/109686
