this option was already unselectable in the UI, and is treated as GGX
with zero roughness. Upon building the shader graph, we only convert a
closure to `SHARP` when option Filter Glossy is not used and the
roughness is below certain threshold. The benefit is that we can avoid
calling `bsdf_eval()` or return earlier in some cases, but the thresholds
vary across files.
This patch removes `SHARP` closures altogether, and checks if the
roughness value is below a global threshold `BSDF_ROUGHNESS_THRESH`
after blurring, in which case the flag `SD_BSDF_HAS_EVAL` is not set.
The global threshold is set to be `5e-7f` because threshold smaller than
that seems to have caused problem in the past (c6aa0217ac). Also removes
a bunch of functions, variables and arguments that were only there
because we converted closures under certain conditions.
Pull Request: https://projects.blender.org/blender/blender/pulls/109902
The Voronoi distance output is clamped at 8, which is apparent for distance
metrics like Minkowski with low exponents.
This patch fixes that by setting the initial distance of the search loop to
FLT_MAX instead of 8. And for the Smooth variant of F1, the "h" parameter is set
to 1 for the first iteration using a signal value, effectively ignoring the
initial distance and using the computed distance at the first iteration instead.
Pull Request: https://projects.blender.org/blender/blender/pulls/109286
The Voronoi Smooth F1 mode breaks when the Smoothness is 0 for OSL. This is
due to a zero division in the shader.
To fix this, standard F1 is used when Smoothness is 0.
Pull Request: https://projects.blender.org/blender/blender/pulls/109255
Fractal noise is the idea of evaluating the same noise function multiple times with
different input parameters on each layer and then mixing the results. The individual
layers are usually called octaves.
The number of layers is controlled with a "Detail" slider.
The "Lacunarity" input controls a factor by which each successive layer gets scaled.
The existing Noise node already supports fractal noise. Now the Voronoi Noise node
supports it as well. The node also has a new "Normalize" property that ensures that
the output values stay in a [0.0, 1.0] range. That is except for the F2 feature where
in rare cases the output may be outside that range even with "Normalize" turned on.
How the individual octaves are mixed depends on the feature and output socket:
- F1/Smooth F1/F2:
- Distance/Color output:
The individual Distance/Color octaves are first multiplied by a factor of
`Roughness ^ (#layers - 1.0)` then added together to create the final output.
- Position output:
Each Position octave gets linearly interpolated with the combined output of the
previous octaves. The Roughness input serves as an interpolation factor with
0.0 resutling in only using the combined output of the previous octaves and
1.0 resulting in only using the current highest octave.
- Distance to Edge:
- Distance output:
The Distance octaves are mixed exactly like the Position octaves for F1/Smooth F1/F2.
It should be noted that Voronoi Noise is a relatively slow noise function, especially
at higher dimensions. Increasing the "Detail" makes it even slower. Therefore, when
optimizing a scene one should consider trying to use simpler noise functions instead
of Voronoi if the final result is close enough.
Pull Request: https://projects.blender.org/blender/blender/pulls/106827
The input socket of Image Texture node is connected with the UV output
of Texture Coordinate node by default, the later reads the geometry UV,
which is not available for lights because they have no real geometry.
The current implementation simply retrieves UV from shader data.
Pull Request: https://projects.blender.org/blender/blender/pulls/108691
While the multiscattering GGX code is cool and solves the darkening problem at higher roughnesses, it's also currently buggy, hard to maintain and often impractical to use due to the higher noise and render time.
In practice, though, having the exact correct directional distribution is not that important as long as the overall albedo is correct and we a) don't get the darkening effect and b) do get the saturation effect at higher roughnesses.
This can simply be achieved by adding a second lobe (https://blog.selfshadow.com/publications/s2017-shading-course/imageworks/s2017_pbs_imageworks_slides_v2.pdf) or scaling the single-scattering GGX lobe (https://blog.selfshadow.com/publications/turquin/ms_comp_final.pdf). Both approaches require the same precomputation and produce outputs of comparable quality, so I went for the simple albedo scaling since it's easier to implement and more efficient.
Overall, the results are pretty good: All scenarios that I tested (Glossy BSDF, Glass BSDF, Principled BSDF with metallic or transmissive = 1) pass the white furnace test (a material with pure-white color in front of a pure-white background should be indistinguishable from the background if it preserves energy), and the overall albedo for non-white materials matches that produced by the real multi-scattering code (with the expected saturation increase as the roughness increases).
In order to produce the precomputed tables, the PR also includes a utility that computes them. This is not built by default, since there's no reason for a user to run it (it only makes sense for documentation/reproducibility purposes and when making changes to the microfacet models).
Pull Request: https://projects.blender.org/blender/blender/pulls/107958
Used to be https://archive.blender.org/developer/D17123.
Internally these are already using the same code path anyways, there's no point in maintaining two distinct nodes.
The obvious approach would be to add Anisotropy controls to the Glossy BSDF node and remove the Anisotropic BSDF node. However, that would break forward compability, since older Blender versions don't know how to handle the Anisotropy input on the Glossy BSDF node.
Therefore, this commit technically removes the Glossy BSDF node, uses versioning to replace them with an Anisotropic BSDF node, and renames that node to "Glossy BSDF".
That way, when you open a new file in an older version, all the nodes show up as Anisotropic BSDF nodes and render correctly.
This is a bit ugly internally since we need to preserve the old `idname` which now no longer matches the UI name, but that's not too bad.
Also removes the "Sharp" distribution option and replaces it with GGX, sets Roughness to zero and disconnects any input to the Roughness socket.
Pull Request: https://projects.blender.org/blender/blender/pulls/104445
Due to floating point differences between importance sampling and
texture evaluation, disagreeing on whether or not a ray lies within
the sun disc.
* Use the same input values for geographical_to_direction() in
sky_radiance_nishita() and kernel_data.background.sun.
* The mathematical operations in pdf_uniform_cone() were adjusted to
match sky_radiance_nishita().
Pull Request: https://projects.blender.org/blender/blender/pulls/106764
For example
```
OIIOOutputDriver::~OIIOOutputDriver()
{
}
```
becomes
```
OIIOOutputDriver::~OIIOOutputDriver() {}
```
Saves quite some vertical space, which is especially handy for
constructors.
Pull Request: https://projects.blender.org/blender/blender/pulls/105594
This function checks if the shading normal would result in an invalid reflection into the lower hemisphere; if it is the case, the function raises the shading normal just enough so that the specular reflection lies above the surface. This is a trick to prevent dark regions at grazing angles caused by normal/bump maps. However, the specular direction is not a good representation for a diffuse material, applying this function sometimes brightens the result too much and causes unexpected results. This patch applies the function to only glossy materials instead.
Pull Request: #105776
Actually both potential roots lie in the interval [0, 1], so the
function ended up checking both roots all the time.
The new implementation explains why only one of the roots is valid; it
saves two square roots and a bunch of other computations.
This commit replaces the current Glass approach, where Glass is a virtual closure
that gets replaced with a Glossy and a Refractive closure, with a combined
closure that handles Fresnel after sampling the microfacet. That way, the Fresnel
term is more accurate since it accounts for the microfacet normal, not the
shading normal.
Also updates the BSDF sampling to use a 3D sampler now, since we need two
dimensions to pick the microfacet normal and then a third dimension to pick
reflection/refraction. This can also be used to get rid of the LCG in the
Principled Hair BSDF, which means we can remove it altogether once MultiGGX is
gone.
Also, "sharp" is now supported as a microfacet distribution in OSL, and 2
is supported as the "refract" argument to microfacet() in order to get glass.
- Rename roughness variables for more clarity - before, the SVM/OSL code would
set s and v to the linear roughness values, and the setup function would over-
write them with the distribution parameters. This actually caused a bug in the
albedo code, since it intended to use the linear roughness value, but ended up
getting the remapped value.
- Deduplicate the evaluation and sample functions. Most of their code is the
same, only the middle part is different.
- Changed albedo computation to return the sum of the intensities of the four
BSDF lobes. Previously, the code applied the inverse of the color->sigma
mapping from the paper - this returns the color specified in the node, but
for very dark hair (e.g. when using the Melanin controls) the result is
extremely low (e.g. 0.000001) despite the hair still reflecting a significant
amount of light (since the R lobe is independent of sigma). This causes issues
with the light component passes, so this change fixes#104586.
- There's quite a few computations at the start of the evaluation function that
are needed for sampling, evaluation and albedo computation, but only depend on
the view direction. Therefore, just precompute them - we still have space in
PrincipledHairExtra after all.
- Fix a tiny bug - the direction sampling code did not account for the R lobe
roughness modifier.
Pull Request #104669
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
This breaks backwards compatibility some in that 3 sides will be mapped
differently now, but difficult to avoid and can be considered a bugfix.
Similar to rBdd8016f7081f.
Maniphest Tasks: T103615
Differential Revision: https://developer.blender.org/D16910
Expands Color Mix nodes with new Exclusion mode.
Similar to Difference but produces less contrast.
Requested by Pierre Schiller @3D_director and
@OmarSquircleArt on twitter.
Differential Revision: https://developer.blender.org/D16543
Ensure the environment is set up for blender_test, idiff and oslc so that they
can find the required shared libraries.
Also deduplicate add_bundled_libraries() between Linux and macOS.
Includes contributions by Ray Molenkamp and Brecht Van Lommel.
Ref T99618
Commit c8dd33f5a37b6a6db0b6950d24f9a7cff5ceb799 in OSL
changed behavior of shader parameters that reference each other
and are also overwritten with an instance value.
This is causing the "NormalIn" parameter of a few OSL nodes in
Cycles to be set to zero somehow, which should instead have
received the value from a "node_geometry" node Cycles generates
and connects automatically. I am not entirely sure why that is
happening, but these parameters are superfluous anyway, since
OSL already provides the necessary data in the global variable "N".
So this patch simply removes those parameters (which mimics
SVM, where these parameters do not exist either), which also
fixes the rendering artifacts that occured with recent OSL.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D16470
This patch is a response to T92588 and is implemented
as a Function/Shader node.
This node has support for Float, Vector and Color data types.
For Vector it supports uniform and non-uniform mixing.
For Color it now has the option to remove factor clamping.
It replaces the Mix RGB for Shader and Geometry node trees.
As discussed in T96219, this patch converts existing nodes
in .blend files. The old node is still available in the
Python API but hidden from the menus.
Reviewed By: HooglyBoogly, JacquesLucke, simonthommes, brecht
Maniphest Tasks: T92588
Differential Revision: https://developer.blender.org/D13749
The calculation was revised to address two issues:
* Discontinuities occurring when detail was a non-integer greater than 2.
* Levels of detail in the interval [0,1) repeating the levels of detail in
the interval [1,2).
This fixes Cycles, Eevee and geometry nodes.
Differential Revision: https://developer.blender.org/D15785
Simplifies intersection code a little and slightly improves precision regarding
self intersection.
The parametric texture coordinate in shader nodes is still the same as before
for compatibility.
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
An alpha component can be specified for an object's color. This adds an alpha
socket to the object info shader node allowing for the alpha component of the
object's color to be accessed in the shader editor.
Differential Revision: https://developer.blender.org/D14141
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
This replaces lost functionality from the old GN Attribute Map Range node.
This also adds vector support to the shader version of the node.
Notes:
This breaks forward compatibility as this node now uses data storage.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D12760
When rendering volume surfaces in unbounded worlds the volume stepping can produce large values. If used with a magic texture node the values can results in a Inf float which when used in a sin or cos produces a NaN.
To fix this the input values are mapped into the periodic range of the sin and cos functions (-2*PI 2*PI) this stops the possibility of a Inf occurring and thus the NaN. It also improves the accuracy and smoothness of the result due to loss of precision when large values are summed with smaller ones effectively removing the parts of the smaller number (i.e. those in the -2PI to 2PI range) that result in variation of the output of sin and cos.
Reviewed By: brecht
Maniphest Tasks: T92036
Differential Revision: https://developer.blender.org/D12821
We run into float precision issues here, clamp the number of octaves to
one less, which has little to no visual difference. This was empirically
determined to work up to 16 before, but with additional inputs like
roughness only 15 appears to work.
Also adds misisng clamp for the geometry nodes implementation.
* Split render/ into scene/ and session/. The scene/ folder now contains the
scene and its nodes. The session/ folder contains the render session and
associated data structures like drivers and render buffers.
* Move top level kernel headers into new folders kernel/camera/, kernel/film/,
kernel/light/, kernel/sample/, kernel/util/
* Move integrator related kernel headers into kernel/integrator/
* Move OSL shaders from kernel/shaders/ to kernel/osl/shaders/
For patches and branches, git merge and rebase should be able to detect the
renames and move over code to the right file.
