ebe8f8ce71 and 5669c5a61b added multithreading but
a typo meant it wasn't used for half of the process. Fixing that gives a
30% improvement in my tests, from about 80 to 60 ms converting a grid.
First we copied the entire BMesh custom data layout to the Mesh, then we
decided not to copy some boolean layers like UV pinning if every value
was false. But that left the layers uninitialized. Instead, copy the
custom data layout _after_ finding which layers to skip.
Replace `typedef struct X {} X;` with `struct X {};`
In some cases the first and last name didn't match although this
is rarely useful, even a typo in some cases, e.g. TrachPathPoint.
Face maps were added as a prototype of a new rigging solution during
2.8 development. Their storage is redundant with the newer generic
attribute system (specifically with integer face attributes), and
they were never used much. This commit removes the face map list
and converts the storage to an attribute with the name `face_maps`.
There is nowhere to store the face map names anymore, so those
are not kept.
It probably still makes sense to have a feature like mesh face gizmo
selection for rigging. But the design and implementation woulds likely
have to change significantly, including possibly changing the storage
type, and making use of the generic attribute system instead of a
special type.
See #105317 for more discussion.
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
Avoid instantiating the templates separately in every translation unit.
This saves 20 KB in my Blender binary. Also remove a timer mistakenly
committed.
This saves about 6 ms every update when in edit mode on a 1 million
face grid. For reference, the BMesh to Mesh conversion took 80 ms,
before and after the change.
The various stacks are just filled and then emptied. We also expect
them to be fairly small. A vector can handle these cases fairly well.
Also store indices rather than pointers. I didn't notice any performance
changes from these changes.
interior cuts"
This reverts commit 129f79debe.
That commit changed the behavior of how booleans handled vertex weights
as well and made the CubeMaskFirst test modifier test fail.
Not entirely clear to me what the desired behavior would be (current
situation is "wrong" in certain situations as well I think), but until
this is further discussed with the #modeling-module , I think reverting
is the better choice.
Using the Knife tool, making cuts that split an edge exactly interpolate
fine for vertex customdata (weights or attributes on the vertex domain)
due to `BM_edge_split` taking care of data layers from the edge and
vertex domain (also mdisps -- which unfortunately dont seem to work
well, but that is for another patch...).
However, making cuts _inside_ a face though dont interpolate at all
(giving default values on new vertices).
With this patch, also interpolate vertex customdata in
`BM_face_split_edgenet`.
Pull Request: https://projects.blender.org/blender/blender/pulls/107367
The result of detecting if a quad should flip the default 0-2 split
when tessellated only used a pre-calculated normal when available,
since the method of detecting the flip was different, the check for a
concave face could change depending on the existence of polygon-normals.
In practice this meant cycles render preview could use a different
tessellation than the GPU display.
While [0] exposed the bug, it's an inherent problem with having 2
methods of detecting concave quads.
Remove is_quad_flip_v3_first_third_fast_with_normal(..) and always
use is_quad_flip_v3_first_third_fast(..), because having to calculate
the normal inline has significant overhead.
Note that "bow-tie" quads may now render with a subdivision in a
different direction although they must be very distorted with both
triangles along the 0-2 split pointing away from each other.
Thanks to @HooglyBoogly for investigating the issue.
[0]: 16fbadde36.
Implements #95966, as the final step of #95965.
This commit changes the storage of mesh edge vertex indices from the
`MEdge` type to the generic `int2` attribute type. This follows the
general design for geometry and the attribute system, where the data
storage type and the usage semantics are separated.
The main benefit of the change is reduced memory usage-- the
requirements of storing mesh edges is reduced by 1/3. For example,
this saves 8MB on a 1 million vertex grid. This also gives performance
benefits to any memory-bound mesh processing algorithm that uses edges.
Another benefit is that all of the edge's vertex indices are
contiguous. In a few cases, it's helpful to process all of them as
`Span<int>` rather than `Span<int2>`. Similarly, the type is more
likely to match a generic format used by a library, or code that
shouldn't know about specific Blender `Mesh` types.
Various Notes:
- The `.edge_verts` name is used to reflect a mapping between domains,
similar to `.corner_verts`, etc. The period means that it the data
shouldn't change arbitrarily by the user or procedural operations.
- `edge[0]` is now used instead of `edge.v1`
- Signed integers are used instead of unsigned to reduce the mixing
of signed-ness, which can be error prone.
- All of the previously used core mesh data types (`MVert`, `MEdge`,
`MLoop`, `MPoly` are now deprecated. Only generic types are used).
- The `vec2i` DNA type is used in the few C files where necessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/106638
Changes to [0] which worked as intended but used confusing naming.
- The note on using -1 for the active layer causes an assertion.
- The doc-string was above the wrong function.
- The meaning of the `_n()` suffix was flipped,
where the `layer_index_n` refers to an absolute index across all
layer types which is done internally for an index calculated from the
`layer` argument, not the argument it's self which is a UV index.
Rename BM_uv_map_get_offsets_n to BM_uv_map_get_offsets_from_layer.
[0]: 412b6a8f65
This integrates the new implicit-sharing system (from fbcddfcd68)
with `CustomData`. Now the potentially long arrays referenced by custom
data layers can be shared between different systems but most importantly
between different geometries. This makes e.g. copying a mesh much cheaper
because none of the attributes has to be copied. Only when an attribute
is modified does it have to be copied.
Also see the original design task: #95845.
This reduces memory and improves performance by avoiding unnecessary
data copies. For example, the used memory after loading a highly
subdivided mesh is reduced from 2.4GB to 1.79GB. This is about 25%
less which is the expected amount because in `main` there are 4 copies
of the data:
1. The original data which is allocated when the file is loaded.
2. The copy for the depsgraph allocated during depsgraph evaluation.
3. The copy for the undo system allocated when the first undo step is
created right after loading the file.
4. GPU buffers allocated for drawing.
This patch only gets rid of copy number 2 for the depsgraph. In theory
the other copies can be removed as part of follow up PRs as well though.
-----
The patch has three main components:
* Slightly modified `CustomData` API to make it work better with implicit
sharing:
* `CD_REFERENCE` and `CD_DUPLICATE` have been removed because they are
meaningless when implicit-sharing is used.
* `CD_ASSIGN` has been removed as well because it's not an allocation
type anyway. The functionality of using existing arrays as custom
data layers has not been removed though.
* This can still be done with `CustomData_add_layer_with_data` which
also has a new argument that allows passing in information about
whether the array is shared.
* `CD_FLAG_NOFREE` has been removed because it's no longer necessary. It
only existed because of `CD_REFERENCE`.
* `CustomData_copy` and `CustomData_merge` have been split up into a
functions that do copy the actual attribute values and those that do
not. The latter functions now have the `_layout` suffix
(e.g. `CustomData_copy_layout`).
* Changes in `customdata.cc` to make it actually use implicit-sharing.
* Changes in various other files to adapt to the changes in `BKE_customdata.h`.
Pull Request: https://projects.blender.org/blender/blender/pulls/106228
The existing utility cleared vertex group names and active attribute
names, which doesn't always make sense when the geometry is
replaced but the custom data layout remains mainly unchanged.
CustomData_get_active_layer_index() was used by accident. But that
returns the CustomData layer index (in all layers) as opposed to
CustomData_get_active_layer(), which returns the active UV layer.
Pull Request: https://projects.blender.org/blender/blender/pulls/106644
Implements #95967.
Currently the `MPoly` struct is 12 bytes, and stores the index of a
face's first corner and the number of corners/verts/edges. Polygons
and corners are always created in order by Blender, meaning each
face's corners will be after the previous face's corners. We can take
advantage of this fact and eliminate the redundancy in mesh face
storage by only storing a single integer corner offset for each face.
The size of the face is then encoded by the offset of the next face.
The size of a single integer is 4 bytes, so this reduces memory
usage by 3 times.
The same method is used for `CurvesGeometry`, so Blender already has
an abstraction to simplify using these offsets called `OffsetIndices`.
This class is used to easily retrieve a range of corner indices for
each face. This also gives the opportunity for sharing some logic with
curves.
Another benefit of the change is that the offsets and sizes stored in
`MPoly` can no longer disagree with each other. Storing faces in the
order of their corners can simplify some code too.
Face/polygon variables now use the `IndexRange` type, which comes with
quite a few utilities that can simplify code.
Some:
- The offset integer array has to be one longer than the face count to
avoid a branch for every face, which means the data is no longer part
of the mesh's `CustomData`.
- We lose the ability to "reference" an original mesh's offset array
until more reusable CoW from #104478 is committed. That will be added
in a separate commit.
- Since they aren't part of `CustomData`, poly offsets often have to be
copied manually.
- To simplify using `OffsetIndices` in many places, some functions and
structs in headers were moved to only compile in C++.
- All meshes created by Blender use the same order for faces and face
corners, but just in case, meshes with mismatched order are fixed by
versioning code.
- `MeshPolygon.totloop` is no longer editable in RNA. This API break is
necessary here unfortunately. It should be worth it in 3.6, since
that's the best way to allow loading meshes from 4.0, which is
important for an LTS version.
Pull Request: https://projects.blender.org/blender/blender/pulls/105938
When accessing UVmaps from python in BMesh, the UVmap name/index was ignored
and the active UVmap always used. This fixes this by passing the layer index
to the underlying CustomData function.
Pull Request: https://projects.blender.org/blender/blender/pulls/106537
The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
When converting a BMesh to a Mesh, the attribute would be removed if
all values were true, since BMesh stores the data in a reversed flag.
The check worked the same way for the sharp face attribute already.
Implements #102359.
Split the `MLoop` struct into two separate integer arrays called
`corner_verts` and `corner_edges`, referring to the vertex each corner
is attached to and the next edge around the face at each corner. These
arrays can be sliced to give access to the edges or vertices in a face.
Then they are often referred to as "poly_verts" or "poly_edges".
The main benefits are halving the necessary memory bandwidth when only
one array is used and simplifications from using regular integer indices
instead of a special-purpose struct.
The commit also starts a renaming from "loop" to "corner" in mesh code.
Like the other mesh struct of array refactors, forward compatibility is
kept by writing files with the older format. This will be done until 4.0
to ease the transition process.
Looking at a small portion of the patch should give a good impression
for the rest of the changes. I tried to make the changes as small as
possible so it's easy to tell the correctness from the diff. Though I
found Blender developers have been very inventive over the last decade
when finding different ways to loop over the corners in a face.
For performance, nearly every piece of code that deals with `Mesh` is
slightly impacted. Any algorithm that is memory bottle-necked should
see an improvement. For example, here is a comparison of interpolating
a vertex float attribute to face corners (Ryzen 3700x):
**Before** (Average: 3.7 ms, Min: 3.4 ms)
```
threading::parallel_for(loops.index_range(), 4096, [&](IndexRange range) {
for (const int64_t i : range) {
dst[i] = src[loops[i].v];
}
});
```
**After** (Average: 2.9 ms, Min: 2.6 ms)
```
array_utils::gather(src, corner_verts, dst);
```
That's an improvement of 28% to the average timings, and it's also a
simplification, since an index-based routine can be used instead.
For more examples using the new arrays, see the design task.
Pull Request: https://projects.blender.org/blender/blender/pulls/104424
This simplifies the usage of the API and is preparation for #104478.
The `CustomData_add_layer` and `CustomData_add_layer_named` now have corresponding
`*_with_data` functions that should be used when creating the layer from existing data.
Pull Request: https://projects.blender.org/blender/blender/pulls/105708
In practice this probably didn't cause bugs, but it would have
caused extra copies of the UV helper layers. The layers are only
needed if we find true values. Mistake in 0fe0db63d7.
