This node generates a naturally parametarized (even length edge) poly
spline version of every spline in the input. There are two modes,
"Count", and "Length". These are similar to the same options for the
line primitive node in end points mode.
I implemented this instead of a "Sample Points" node, because for this
operation it's trivial to keep the result as a curve, which is nice
since it increases flexibility, and because it can make instancing
simpler, i.e. using the transforms of each evaluated point rather than
requiring the construction of a "rotation" attribute.
Differential Revision: https://developer.blender.org/D11173
Now it's possible to append materials of one grease pencil object into another one. The operator allows active material or all materials.
Also, the Layer Copy To Object has been renamed to Layer Append to Object to keep consistency and now allows to append all layers at once.
This adds `parallel_for` to the Attribute Curve Map node to improve performance.
Grain size set to 512.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11194
This node has the same functionality as the color and vector curve
mapping nodes in the shader editor. Here is works on every value for
the selected attribute, and it can also output a float value. Other
than that, the implementation is quite straightforward-- almost
completely boilerplate code.
Differential Revision: https://developer.blender.org/D10921
This option should always be available. Even if it does not affect the
current object depending on its mode, it affects the rest of the geometry
of the scene.
The rest of the options also work this way. For example, a grease pencil
object does not have face orientation, but the ovelay option is still
there for the rest of the scene.
Reviewed By: JulienKaspar, HooglyBoogly
Maniphest Tasks: T83398
Differential Revision: https://developer.blender.org/D10215
Partial fix for T81751 which exposes multiple playback performance
issues. Previously the cache was limited to 30 frames, without a way to
increase the cache for smooth playback with files that are slow to load.
Now the animation plays back smoothly once loaded into cache.
The cache limit from the system preference is used
when the player is launched from Blender.
A new player argument `-c <cache_limit>` was added to support this.
The `file.execute` operator would early-exit because the mouse wasn't hovering
the file list. Caused by 4ba9d7d71e.
Although simpler solutions would have been possible, I decided it's better to
split add a new operator for executing based on the mouse (for double-clicking
files), to separate that from the window level execute operator
(`file.execute`). This allows more control and we can get rid of the implicit
assumption that the keymap would call `file.select` on mouse-press, and
`file.execute` on double-click, for the double-click behavior to work. The cost
is that we execute the file selection & activation logic twice on the
double-click, but that shouldn't be an issue at all.
Also removes the `need_active` property from the `file.execute` operator.
That's ancient and wasn't implemented well anyway.
To be clear, reason this fixes the bug is that `file.execute` works entirely
with the `execute()` callback now and doesn't early-exit based on the mouse
position anymore.
Might trigger warnings about the `need_active` property not being found for
custom keymaps. These can be ignored and the property can safely be removed
from the keymap. I don't expect other keymap breakages.
Match the output to the prefilled bug report script's output.
Make the output file self-contained.
Reviewed By: lichtwerk
Differential Revision: https://developer.blender.org/D11144
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
This patch adds initial curve support to geometry nodes. Currently
there is only one node available, the "Curve to Mesh" node, T87428.
However, the aim of the changes here is larger than just supporting
curve data in nodes-- it also uses the opportunity to add better spline
data structures, intended to replace the existing curve evaluation code.
The curve code in Blender is quite old, and it's generally regarded as
some of the messiest, hardest-to-understand code as well. The classes
in `BKE_spline.hh` aim to be faster, more extensible, and much more
easily understandable. Further explanation can be found in comments in
that file.
Initial builtin spline attributes are supported-- reading and writing
from the `cyclic` and `resolution` attributes works with any of the
attribute nodes. Also, only Z-up normal calculation is implemented
at the moment, and tilts do not apply yet.
**Limitations**
- For now, you must bring curves into the node tree with an "Object
Info" node. Changes to the curve modifier stack will come later.
- Converting to a mesh is necessary to visualize the curve data.
Further progress can be tracked in: T87245
Higher level design document: https://wiki.blender.org/wiki/Modules/Physics_Nodes/Projects/EverythingNodes/CurveNodes
Differential Revision: https://developer.blender.org/D11091
Reported for ops.transform.vertex_warp and ops.transform.vertex_random.
Polling will check with ED_transverts_check_obedit, if we know it will
fail e.g. for pose mode, we can do the same check in the UI already.
Maniphest Tasks: T87926
Differential Revision: https://developer.blender.org/D11128
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
This is a first version of an Attribute Transfer node. It only supports two
modes for mapping attributes from one geometry to another for now.
More options are planned for the future.
Ref T87421.
Differential Revision: https://developer.blender.org/D11037
In cases where the same node tree is used in different materials with
small changes, the wrong material could be selected.
Cause: Hair shaders GPU resources weren't updated and used the previous bound data.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11036
Add a keying set that includes location, rotation, scale, and custom
properties.
The keying set is intentionally not based on the "Whole Character"
keying set. Instead, it is generic enough to be used in both object and
pose animation, making it possible to quickly switch between animating
characters and props without switching keying sets.
This is, according to @rikkert, what the Blender Studio animators need
99.9% of the time.
Move code common to the Whole Character keying sets ("Whole Character" and
"Whole Character (Selected Bones Only)" into a mix-in class. This avoids
the need to use direct assignments like
`poll = BUILTIN_KSI_WholeCharacter.poll`.
No functional changes.
This is a first iteration of a switch node. It can only switch between
two inputs values based on a boolean. A more sophisticated switch
node that has an integer selector will probably come later.
Currently, the geometry nodes evaluator does not support lazy evaluation
of individual inputs. Therefore, all inputs will be computed currently.
An improvement to the evaluator will be worked on separately.
Ref: T85374
Differential Revision: https://developer.blender.org/D10460
This changes the following items:
- package name is now `blender-3.0.0-git.09eb04c0a865-windows64`
rather than `blender-3.00.0-git.09eb04c0a865-windows64`
- Fix version resource for blender.exe not building
- Data directories are now `3.0\...` rather than `3.00\....`
- User prefs are now in:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.0\`
rather than:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.00\`
- Updating startup & preferences from previous release
has a special exception for 3.0 to check for 3.93 and older.
See T87532
Ref D10986
`make lite` does not use audaspace, so some files will pollute the console with
tons of warnings about audio values not defined.
Reviewed By: nexyon, campbellbarton
Differential Revision: https://developer.blender.org/D10981
Since these were added, we decided that builtin and reserved name
attributes start with a lowercase letter. We also use "id" already in
a few nodes, so this change will be consistent with that.
When inserting a node on top of a link, the multi input socket
indices weren't updated. This fixes that and keeps the relative
order of the links the same.
Author: Wannes Malfait
Reviewed By: Fabian Schempp
Differential Revision: https://developer.blender.org/D10969
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
Within the 2D Animation workspace, the 'Cursor' dropdown currently displays the 'Display Cursor' incorrectly aligned.
This change fixes the alignment issue.
Reviewed By: #user_interface, #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D10614
