Effect strip start position was translated twice. This is caused by
recent refactoring, see 7afcfe111a.
Don't change `seq->start` of attached effect strips during translation
and only rely on `seq_time_update_effects_strip_range` function.
The node has always be a bit confusing for the NURBS case, since it
uses the distance between control points since the evaluated/control
point mapping isn't obvious, but it also went above 1, which wasn't
correct.
Instead, retrieve the total length from the point lengths calculated
in the previous step. The results should be the same for other curve
types.
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
Not quite sure why {rBd37d17019c52} forcefully set the Mesh to NULL if
in editmode, but this caused the attribute lookup to fail/crash.
Now only use the attribute if we have the mesh (reducing the scope where
it is used), bmesh editmode case does not rely on it.
Maniphest Tasks: T102318
Differential Revision: https://developer.blender.org/D16406
The auto-masking was working by Brush and this was very
inconvenient because it was necessary set the options by
Brush, now the options are global and can be set at once.
Also, the automa-masking now works with `and` logic
and not with `or` as before. That means that a stroke
must meet all the conditions of the masking.
Added new Layer and Material options to masking the
strokes using the same Layer/Material of the selected stroke.
Before, only Active Layer and Active Material could be masked.
The options of masking has been moved to the top-bar using
the same design of Mesh Sculpt masking.
As result of the changes above, the following props changed:
Removed:
`brush.gpencil_settings.use_automasking_strokes`
`brush.gpencil_settings.use_automasking_layer`
`brush.gpencil_settings.use_automasking_material`
Added:
`tool_settings.gpencil_sculpt.use_automasking_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_stroke`
`tool_settings.gpencil_sculpt.use_automasking_material_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_active`
`tool_settings.gpencil_sculpt.use_automasking_material_active`
Reviewed by: Julien Kaspar, Matias Mendiola, Daniel Martinez Lara
Previously, the code would incorrectly free the passed in custom data
layer even when `CD_ASSIGN` was not used. Now the function actually
supports assigning the data to the layer. This only fixes the case for
custom data layer types that only support a single layer like `CD_MEDGE`.
Informally reviewed by Hans Goudey.
Change the behaviour of circle select on FCurves:
- Before any key is touched, the behaviour is as it was (key included in
circle-select area → select it; otherwise → select entire curve)
- If any key has been touched, an internal option
(`use_curve_selection`) is flipped and selecting the entire curve is
disallowed.
This ensures that once a key changes selection state, it's no longer
possible to select the entire curve. This allows dragging over keys and
subsequently drag over a keyless part of the curve.
Reviewed By: RiggingDojo, troopy28
Maniphest Tasks: T101894
Differential Revision: https://developer.blender.org/D16307
This patch introduces a new `CacheMutex` which makes it easy to implement
lazily computed caches in e.g. `Curves`. For more details see `BLI_cache_mutex.hh`.
Differential Revision: https://developer.blender.org/D16419
When changing the texture paint slot index or activating a Texture Node, the texture displayed in the Image Editor changes accordingly.
This patch syncs the Image Editor when a new texture paint slot was added, which currently is not the case.
Also deduplicates some code.
Rotation and scale was done around the wrong center (always around mouse
position) in paint_draw_tex_overlay [on the other hand,
paint_draw_cursor_overlay already got the center right].
Now make the center dependent on UnifiedPaintSettings "draw_anchored".
Maniphest Tasks: T102312
Differential Revision: https://developer.blender.org/D16418
The color-band needs to do some special, rather awkward updating of the
UI state when certain values are changed. As @lichtwerk noted in the
report, this was done to the wrong buttons. Now lookup the proper
buttons, and don't assume that `uiItemR()` only adds a single button
(which often isn't the case).
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
Function casts hid casting between potentially incompatible type
signatures (using int instead of Py_ssize_t). As it happens this seems
not to have caused any bugs on supported platforms so this change is
mainly for correctness and to avoid problems in the future.
Missed these changes in [0].
Also replace designated initializers in some C code, as it's not used
often and would need to be removed when converting to C++.
[0] e555ede626
Seems like the new audio channel api was not as backwards compatible as we thought.
Therefore we need to reintroduce the usage of the old api to make older ffmpeg version be able to compile Blender.
This change is only intended to stick around for two releases or so. After that we hope that most Linux distros ship
ffmpeg >=5.0 so we can switch to it.
Reviewed By: Sergey
Differential Revision: http://developer.blender.org/D16408
As instances are often generated geometries, we cannot rely on the data
provided by `DupliObject::ob`.
Use `DupliObject::ob_data` when possible.
This required a major refactor in the code as the output variables are
now gathered in context and easier to access.
Use struct identifiers in comments before the value.
This has some advantages:
- The struct identifiers didn't mix well with other code-comments,
where other comments were wrapped onto the next line.
- Minor changes could re-align all other comments in the struct.
- PyVarObject_HEAD_INIT & tp_name are no longer placed on the same line.
Remove overly verbose comments copied from PyTypeObject (Python v2.x),
these aren't especially helpful and get outdated.
Also corrected some outdated names:
- PyTypeObject.tp_print -> tp_vectorcall_offset
- PyTypeObject.tp_reserved -> tp_as_async
