This adds the `Pen` tool to Grease Pencil Edit Mode.
With the pen tool you can:
- Extrude points by `Left Click`.
- Move the handles by dragging the mouse.
- Snap handles to 45 degree increments with `Shift`.
- Cycle through the handle types by `Double Clicking`.
- Add new point on segments by `Ctrl Clicking`.
- Remove existing point by `Ctrl Clicking`.
- Close a curve by clicking on one end while having the other selected.
- Move existing segment by clicking and dragging on the edge.
- Move points by clicking and dragging the mouse.
Some changes have been made compared to the legacy
curve object's pen tool:
- `Angle locking` with `Alt` was replaced with `Angle Snapping`
using `Shift`. This was done to match the behavior of Grease Pencil
primitive tools.
- `Move Entire Point` was changed from the `Space` key to `Alt`. This
was done because some laptops can't move the mouse while
`Space` is held.
- `Link Handles` and `Free Align Toggle` were not implemented.
- `Toggle Vector` and `Close Spline Method` were removed.
- `Close Spline` was removed and set to always be true.
- `Extrude Handle` type was removed as a option and was replaced
by the `shift` modifier key when clicking.
- Newly created points are placed on the drawing plane, instead of
the view plane.
When a new curve is created, the material will be the active material
and the radius will be set from the `radius` property.
Note: This tool is added to edit mode because it uses handle selection
and bézier overlays which currently don't exist in draw mode.
A future PR will implement a draw mode version.
Pull Request: https://projects.blender.org/blender/blender/pulls/142646
Introduced in 4434a30d40
The above commit changed many of the `wm.radial_control` default
keybinds used in various paint modes to support accessing the "unified"
properties on a per-mode basis. While the base Blender keymap and the
industry compatible keymap were updated, this change was not applied
to custom keymaps, leading to confusing behavior for the users.
Pull Request: https://projects.blender.org/blender/blender/pulls/143872
Add support for a 5th modifier key called "hyper",
this is a modifier supported on Wayland & X11 although
other platforms could support an additional modifier too.
Both GNOME and KDE can map CapsLock to Hyper.
Other compositors can use the XKB_DEFAULT_OPTIONS environment variable.
This allows users to have an additional modifier for their own use
that doesn't conflict with other keys.
Ref !136340
Rename to be more consistent with other Blender keymaps, as well as the
naming convention used in "View Type."
- "SequencerCommon" -> "Video Sequence Editor"
- "SequencerPreview" -> "Preview"
- "Sequencer Timeline Tool" -> "Sequencer Tool"
- "Sequencer Preview Tool" -> "Preview Tool"
There is versioning in place to make sure custom keyconfigs keep working.
Once #131102 goes through, if we would like to rename the "Sequencer"
view type to "Timeline" or "Sequencer Timeline," then we can make the
necessary changes here too.
Pull Request: https://projects.blender.org/blender/blender/pulls/136217
Suppress unused warnings using the "vulture" utility.
- Include public definitions in the modules `__all__`.
- Mark arguments & variables as unused with a "_" prefix.
This should free up references to GPv2 types and operators and should
in turn make their removal easier.
- Remove keymaps for GPv2 operators from `blender_default.py` and
`industry_compatible_data.py`
- Remove keymap poll callback assignment from `gpencil_ops.cc`
- Remove keymap handler registration from `area.cc:ed_default_handlers`
Pull Request: https://projects.blender.org/blender/blender/pulls/128480
BaseException was used as a catch-all in situations where it
didn't make sense and where "Exception" is more appropriate
based on Python's documentation & error checking tools,
`pylint` warns `broad-exception-caught` for e.g.
BaseException includes SystemExit, KeyboardInterrupt & GeneratorExit,
so unless the intention is to catch calls to `sys.exit(..)`,
breaking a out of a loop using Ctrl-C or generator-exit,
then it shouldn't be used.
Even then, it's preferable to catch those exceptions explicitly.
This is the main merge commit of the brush assets project. The previous
commits did some preparing changes, more tweaks are in the following commits.
Also, a lot of the more general work was already merged into the main branch
over the last two years.
With the new design, quite some things can be removed/replaced:
- There's a unified "Brush" tool now, brush based tools and all special
handling is removed.
- Old tool and brush icons are unsed now, and their initialization code
removed here. That means they draw as blank now, and the icon files can be
removed in a follow up.
- Creation of default brushes is unnecessary since brushes are now bundled in
the Essentials asset library. Icons/previews are handled as standard asset
previews.
- Grease pencil eraser options are replaced by a general default eraser brush
that can be set by the user.
More changes are planned still, see task list issue below.
Main Authors: Bastien Montagne, Brecht Van Lommel, Hans Goudey, Julian Eisel
Additionally involved on the design: Dalai Felinto, Julien Kaspar
Blog Post: https://code.blender.org/2024/07/brush-assets-is-out/
Tasks:
https://projects.blender.org/blender/blender/issues/116337
Reviewed incrementally as part of the brush assets project, see:
https://projects.blender.org/blender/blender/pulls/106303
Implementation of the GPv2 Fill tool in Grease Pencil 3.
This tool creates new strokes where the user clicks, by rendering
strokes into an image and then performing flood-fill and boundary
search operations.
This is a minimal first part, several features of the GPv2 tool are
still missing (gap filling methods, smoothing, dilate/erode).
Co-authored-by: Falk David <falk@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/120693
This PR implements the Cutter Tool for GPv3. The Cutter tool deletes
points in between intersecting strokes. New points are created at the
exact intersection points, so as a result the cutted strokes will fit
perfectly.
For feature parity, the tool follows the GPv2 behavior:
- The cutter tool works on all editable layers.
- Intersections are only detected for curves on the same layer,
so intersection of curves on _seperate_ layers are not handled.
Technical notes
The implementation uses the `compute_topology_change` function
created for the Hard Eraser. So at intersection points, point
attributes will be interpolated.
Pull Request: https://projects.blender.org/blender/blender/pulls/113953
Adds the primitive tools in draw mode to GPv3.
This also adds rotation and scale sub-operators with `r` and `s` keybinds.
Also all control points are editable after extruding.
Pull Request: https://projects.blender.org/blender/blender/pulls/119039
Ensure tool keymaps are registered when calling:
bl_keymap_utils.keymap_hierarchy.generate() in background mode.
This is an alternative to !116299 that doesn't require keymap
initialization in background mode.
Thanks to Damien Picard's for reporting & investigating this issue.
Between Blender versions, properties of some operators may be removed.
When this happens, when importing the keymap from the previous version,
a series of warnings may appear in the console. For example:
```
Warning: property 'alt_navigation' not found in item 'TRANSFORM_OT_translate'
Warning: property 'alt_navigation' not found in item 'TRANSFORM_OT_rotate'
Warning: property 'alt_navigation' not found in item 'TRANSFORM_OT_resize'
Warning: property 'alt_navigation' not found in item 'VIEW3D_OT_edit_mesh_extrude_move_normal'
...
```
Therefore, it seems to be convenient to edit these properties when
versioning.
This commit implements a `remove_properties` utility that makes this
removal simpler.
Pull Request: https://projects.blender.org/blender/blender/pulls/114936
Discussed in #114646.
This commit transforms the "alt_navigation" option of the transform
operators into a new modal key item. "PASSTHROUGH_NAVIGATE"
In addition to cleaning up a lot of the code, it allows you to
customize the key chosen to navigate while transforming.
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Prefer the more generic exception type as it's possible exceptions
derive from this and not "Exception".
Also use the name 'ex' for exceptions instead of 'e'.
This reverts commit d53862351d.
After conducting tests with artists at the studio, it was observed that
altering the Transform Modal Maps caused significant disruption due to
the heavy reliance on the "Proportional Editing" and "Automatic
Constraint" features.
Considering this, it is now deemed more beneficial to provide users
with the choice of adapting their muscle memory to the new changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/109660
As suggested in #108669, the "Navigate during Transform" option has
been removed and this feature works by default.
Now if you press `G`, `R` or `S` to move, rotate or scale an object you
can also navigate in the viewport.
Note that this update modifies the default keymap.
Now pressing `Alt` is required for the following modals:
- `PROPORTIONAL_SIZE_UP`,
- `PROPORTIONAL_SIZE_DOWN`,
- `PROPORTIONAL_SIZE`,
- `AUTOIK_CHAIN_LEN_UP`,
- `AUTOIK_CHAIN_LEN_DOWN`,
- `AUTOCONSTRAIN`,
- `AUTOCONSTRAINPLANE`.
Pull Request: https://projects.blender.org/blender/blender/pulls/109388
This commit implements a new modifier key (`B`) for the transform
operators.
This new key allows changing the 'Snap Base' of a transform by snapping
it to a defined point in the scene.
Ref #66424
# Implementation Details
- This feature is only available in the 3D View.
- This feature is only available for the transform modes:
- `Move`,
- `Rotate`,
- `Scale`,
- `Vert Slide` and
- `Edge Slide`.
- The `Snap Base Edit` is enabled while we are transforming and we
press the key `B`
- The `Snap Base Edit` is confirmed when we press any of the keys:
`B`, `LMB`, `Enter`
- During um operation, if no snap target is set for an element in the
scene (Vertex, Edge...), the snap targets to geometry Vertex, Edge,
Face, Center of Edge and Perpendicular of Edge are set automatically.
- Constraint or similar modal features are not available during the
`Snap Base Edit` mode.
- Text input is not available during the `Snap Base Edit` mode.
- A prone snap base point is indicated with an small cursor drawing.
Pull Request: https://projects.blender.org/blender/blender/pulls/104443
This patch adds several tools and options to the weight paint mode of Grease Pencil.
* Blur tool: smooths out vertex weights, by calculating a gaussian blur of adjacent vertices.
* Average tool: painting the average weight from all weights under the brush.
* Smear tool: smudges weights by grabbing the weights under the brush and 'dragging' them.
* With the + and - icons in the toolbar, the user can easily switch between adding and subtracting weight while drawing weights.
* With shortcut `D` you can toggle between these two.
* The auto-normalize options ensures that all bone-deforming vertex groups add up to 1.0 while weight painting.
* With `Ctrl-F` a radial control for weight is invoked (in addition to the radial controls for brush size and strength).
* With `Ctrl-RMB` the user can sample the weight. This sets the brush Weight from the weight under the cursor.
* When painting weights in vertex groups for bones, the user can quickly switch to another vertex group by clicking on a bone with `Ctrl-LMB`.
For this to work, follow these steps:
* Select the armature and switch to Pose Mode.
* Select your Grease Pencil object and switch immediately to Weight Paint Mode.
* Select a bone in the armature with `Ctrl-LMB`. The corresponding vertex group is automatically activated.
Pull Request: https://projects.blender.org/blender/blender/pulls/106663
"Rotate Normals" is a changeable operation like any other and does not
need to be hardcoded.
An advantage of exposing this modal is that the shortcut key now
appears in the header when rotating an edited mesh.
Hello, this is a small PR to check that my understanding of #102427 is correct before moving on to the rest of the issue.
This PR contains the updated UI of the `Sculpt` menu only. Other menus will be submitted for review later.
Currently exposed operators:
* Move
* Rotate
* Scale
* Box Trim (Trim Mode ="Difference")
* Lasso Trim (Trim Mode ="Difference")
* Box Add (Trim Mode ="Join")
* Lasso Add (Trim Mode ="Join")
* Line Project
* Smooth
* Surface Smooth
* ~~Scale (Could be left out?)~~
* Inflate
* Random
* Relax Topology
* Relax Face Set Boundaries
* Sharpen
* Enhance Details
* Erase Displacement
The original issue specifies `Relax Face Set Boundaries` and `Erase Displacement`. I'm not quite sure if this is done in the UI code or somewhere else.
Reviewed By: Joseph Eagar & Julian Kaspar
Pull Request: https://projects.blender.org/blender/blender/pulls/104718
Add specific modal keyitem for `Vert/Edge Slide` and `TrackBall`.
So they don't need to reuse modal items from other operators.
Note that there is a workround to avoid repeated keys in the status bar.
This commit implements described in the #104573.
The goal is to fix the confusion of the submodule hashes change, which are not
ideal for any of the supported git-module configuration (they are either always
visible causing confusion, or silently staged and committed, also causing
confusion).
This commit replaces submodules with a checkout of addons and addons_contrib,
covered by the .gitignore, and locale and developer tools are moved to the
main repository.
This also changes the paths:
- /release/scripts are moved to the /scripts
- /source/tools are moved to the /tools
- /release/datafiles/locale is moved to /locale
This is done to avoid conflicts when using bisect, and also allow buildbot to
automatically "recover" wgen building older or newer branches/patches.
Running `make update` will initialize the local checkout to the changed
repository configuration.
Another aspect of the change is that the make update will support Github style
of remote organization (origin remote pointing to thy fork, upstream remote
pointing to the upstream blender/blender.git).
Pull Request #104755
