After the removal of the Shadow pass this no longer worked. Now it works by
marking the object as a shadow catcher and returning the Shadow Catcher pass.
The result is different than before, since it also takes into account indirect
light now and uses a different method to weight the contribution of lights that
is adaptive to the light strength.
This is a workaround fix for Open PGL 0.4.1 when the first volume
samples are collected in a later training iteration.
The problem is fixed in Open PGL > 0.5.0 and the workaround
can be removed after upgrading Open PGL.
This commit replaces the current Glass approach, where Glass is a virtual closure
that gets replaced with a Glossy and a Refractive closure, with a combined
closure that handles Fresnel after sampling the microfacet. That way, the Fresnel
term is more accurate since it accounts for the microfacet normal, not the
shading normal.
Also updates the BSDF sampling to use a 3D sampler now, since we need two
dimensions to pick the microfacet normal and then a third dimension to pick
reflection/refraction. This can also be used to get rid of the LCG in the
Principled Hair BSDF, which means we can remove it altogether once MultiGGX is
gone.
Also, "sharp" is now supported as a microfacet distribution in OSL, and 2
is supported as the "refract" argument to microfacet() in order to get glass.
To improve mesh upload speeds and reduce the size of the scene data which allows larger scenes to be rendered.
The meshes in Cycles are currently stored as flattened meshes, where each triangle is stored as a set of 3 vertices. Unflattening writes out the vertices in a list according to the index buffer. This uses a lot of memory and for current hardware does not provide a noticeable benefit. This change unflattens the mesh by directly using the meshes vertex and index buffers directly and skips the unflattening. This change allows for larger scenes and also a reduction in the sizes of the meshes. Further it results in a decrease the amount of time it takes to upload the data to a GPU. This is especially important for when multiple GPUs are used in a single machine.
Pull Request #105173
This reverts commit 19222627c6.
Something went wrong here, seems like this commit merged the main branch
into the release branch, which should never be done.
This patch adds two new kernels: SORT_BUCKET_PASS and SORT_WRITE_PASS. These replace PREFIX_SUM and SORTED_PATHS_ARRAY on supported devices (currently implemented on Metal, but will be trivial to enable on the other backends). The new kernels exploit sort partitioning (see D15331) by sorting each partition separately using local atomics. This can give an overall render speedup of 2-3% depending on architecture. As before, we fall back to the original non-partitioned sorting when the shader count is "too high".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16909
This is both a cleanup and a preparation for the Principled v2 changes.
Notable changes:
- Clearcoat weight is now folded into the closure weight, there's no reason
to track this separately.
- There's a general-purpose helper for computing a Closure's albedo, which is
currently used by the denoising albedo and diffuse/gloss/transmission color
passes.
- The d/g/t color passes didn't account for closure albedo before, this means
that e.g. metallic shaders with Principled v2 now have their color texture
included in the glossy color pass. Also fixes T104041 (sheen albedo).
- Instead of precomputing and storing the albedo during shader setup, compute
it when needed. This is technically redundant since we still need to compute
it on shader setup to adjust the sample weight, but the operation is cheap
enough that freeing up the storage seems worth it.
- Future changes (Principled v2) are easier to integrate since the Fresnel
handling isn't all over the place anymore.
- Fresnel handling in the Multiscattering GGX code is still ugly, but since
removing that entirely is the next step, putting effort into cleaning it up
doesn't seem worth it.
- Apart from the d/g/t color passes, no changes to render results are expected.
Differential Revision: https://developer.blender.org/D17101
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
When rendering in the viewport (or probably on instanced objects, but I didn't
test that), emissive objects whose scale is negative give the wrong value on the
"backfacing" input when multiple sampling is enabled.
The underlying problem was a corner case in how normal transformation is handled,
which is generally a bit messy.
From what I can tell, the pattern appears to be:
- If you first transform vertices to world space and then compute the normal from
them (as triangle light samping, MNEE and light tree do), you need to flip
whenever the transform has negative scale regardless of whether the transform
has been applied
- If you compute the normal in object space and then transform it to world space
(as the regular shader_setup_from_ray path does), you only need to flip if the
transform was already applied and was negative
- If you get the normal from a local intersection result (as bevel and SSS do),
you only need to flip if the transform was already applied and was negative
- If you get the normal from vertex normals, you don't need to do anything since
the host-side code does the flip for you (arguably it'd be more consistent to
do this in the kernel as well, but meh, not worth the potential slowdown)
So, this patch fixes the logic in the triangle emission code.
Also, turns out that the MNEE code had the same problem and was also having
problems in the viewport on negative-scale objects, this is also fixed now.
Differential Revision: https://developer.blender.org/D16952
At the first bounce, the diffuse/glossy/transmission weights are stored so that
contributions along the path can be split into the d/g/t indirect passes.
However, volume bounces always set the weight even at indirect bounces, so
even paths that had their first bounce on a purely glossy object would suddenly
start counting towards the diffuse indirect pass after a secondary volume bounce.
Partially addresses T72011.
The problem here is that the previous barycentric clamping did not deal well
with skinny triangles and would end up generating "sub-pixel jittering"
locations that were actually >20 pixels away.
Differential Revision: https://developer.blender.org/D16727
The first two dimensions of scrambled, shuffled Sobol and shuffled PMJ02 are
equivalent, so this makes no real difference for the first two dimensions.
But Sobol allows us to naturally extend to more dimensions.
Pretabulated Sobol is now always used, and the sampling pattern settings is now
only available as a debug option.
This in turn allows the following two things (also implemented):
* Use proper 3D samples for combined lens + motion blur sampling. This
notably reduces the noise on objects that are simultaneously out-of-focus
and motion blurred.
* Use proper 3D samples for combined light selection + light sampling.
Cycles was already doing something clever here with 2D samples, but using
3D samples is more straightforward and avoids overloading one of the
dimensions.
In the future this will also allow for proper sampling of e.g. volumetric
light sources and other things that may need three or four dimensions.
Differential Revision: https://developer.blender.org/D16443
Uses a light tree to more effectively sample scenes with many lights. This can
significantly reduce noise, at the cost of a somewhat longer render time per
sample.
Light tree sampling is enabled by default. It can be disabled in the Sampling >
Lights panel. Scenes using light clamping or ray visibility tricks may render
different as these are biased techniques that depend on the sampling strategy.
The implementation is currently disabled on AMD HIP. This is planned to be fixed
before the release.
Implementation by Jeffrey Liu, Weizhen Huang, Alaska and Brecht Van Lommel.
Ref T77889
This was not working well in non-trivial scenes before the light tree, and now
it is even harder to make it work well with the light tree. It would average the
with equal weight for every light object regardless of intensity or distance, and
be quite noisy due to not working with multiple importance sampling.
We may restore this if were enough good use cases for the previous implementation,
but let's wait and see what the feedback is.
Some uses cases for this have been replaced by the shadow catcher passes, which
did not exist when this was added.
Ref T77889
Materials now have an enum to set the emission sampling method, to be
either None, Auto, Front, Back or Front & Back. This replace the
previous "Multiple Importance Sample" option.
Auto is the new default, and uses a heuristic to estimate the emitted
light intensity to determine of the mesh should be considered as a light
for sampling. Shaders sometimes have a bit of emission but treating them
as a light source is not worth the memory/performance overhead.
The Front/Back settings are not important yet, but will help when a
light tree is added. In that case setting emission to Front only on
closed meshes can help ignore emission from inside the mesh interior that
does not contribute anything.
Includes contributions by Brecht Van Lommel and Alaska.
Ref T77889
* Split light types into own files, move light type specific code from
light tree and MNEE.
* Move flat light distribution code into own kernel file and host side
building function, in preparation of light tree addition. Add light/sample.h
as main entry point to kernel light sampling.
* Better separate calculation of pdf for selecting a light, and pdf for
sampling a point on the light. The selection pdf is now also stored in
LightSampling for MNEE to correctly recalculate the full pdf when the
shading position changes but the point on the light remains fixed.
* Improvement to kernel light storage, using packed_float3, better variable
names, etc.
Includes contributions by Brecht Van Lommel and Weizhen Huang.
Ref T77889
The wrong guiding distribution was used when direct and indirect light
scattering happened at different locations. Now use a different distribution
for each location.
Recording is not quite correct since OpenPGL does not support spliting the
path like this, instead recording at the start of the volume ray. In practice
this seems to make little difference.
Differential Revision: https://developer.blender.org/D16448
This patch generalizes the OSL support in Cycles to include GPU
device types and adds an implementation for that in the OptiX
device. There are some caveats still, including simplified texturing
due to lack of OIIO on the GPU and a few missing OSL intrinsics.
Note that this is incomplete and missing an update to the OSL
library before being enabled! The implementation is already
committed now to simplify further development.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D15902
This patch enables MNEE on macOS >= 13. There was an inefficiency in the calculation of spill requirements, fixed as of macOS 13. This patch also adds a temporary inlining workaround for a Metal compiler bug which causes `mnee_compute_constraint_derivatives` to behave incorrectly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16235
Changing volume parameters during rendering could cause a crash
when guiding was enabled. It was due to an unintialized state paramter
at the beginning of the path tracing process.
In addition guiding is disabled when dealing with almost delta volumes
(i.e., g close to 1.0 or -1.0).
