Core extensions should have their bugs reported as any other issue in
Blender.
This PR removes their "Rrport a Bug" link.
I left the link only for glTF since it has its own tracker. But I
wouldn't mind removing it as well.
Ref: !125218
When dropping an extension from extensions.blender.org which is
still in the review queue - an error was shown making it seem like
the extension was not compatible with the system.
Adjust wording to clarify that it was not found in the remote repo
which can be caused by it not being part of the repository or when
it's incompatible.
Resolves#125046.
When "bl_info" was on the first line, the legacy add-on would not
install. Correct the check which would also incorrectly detect legacy
add-ons when "bl_info" wasn't found at all.
Regression in [0] caused extensions checks used the same directory & URL
for all remote repositories when checking for updates on startup.
[0]: d2049f0aa7
When the user attempted to install a previously enabled add-on as an
extension after enabling online access and *without* viewing extensions,
installation would fail.
Resolve by adding a check that the remote repository data is available,
adding a button to refresh remote repositories if it's not.
The logic to handle disabling, upgrading & re-enabling extensions
incorrectly assumed all installed add-ons were enabled.
Resolve by only using this logic on installed & enabled add-ons.
When Blender started with an extension enabled from a repository that
referenced a directory that didn't exist - creating the directory
and extensions would fail to import the extension.
This happened because the missing state of the module was cached.
Resolve by clearing Python's path cache for the repository after
running install actions which may have created the directory.
Also run importlib.invalidate_caches() when manually refreshing local
extensions to ensure modules cached as missing can be imported if
they have become available.
As each extension has it's own package, any modules it includes must be
imported as sub-modules. Warn if extensions are including themselves
in the sys.path as this breaks name-spacing of extensions.
Show these warnings in the add-on & extensions UI.
When the repository is owned by another Blender session,
support removing the file-system lock.
This is accessible from a menu in the repository popover.
This is needed if Blender exits unexpectedly while a repository
is being modified (typically install/upgrade).
Addresses #122135.
While this wasn't likely to cause any problems in practice,
using the sub-command "build --split-platform" with a platform
containing any characters that need escaping would have produced a TOML
with invalid syntax.
Add a utility function that's guaranteed to create a valid TOML string.
Various minimal grammar changes in the new Extensions system. For
example changing "Please turn Online Access on the System settings" to
"Please turn Online Access on in the System settings"
Pull Request: https://projects.blender.org/blender/blender/pulls/124262
The functionality of the Bone Selection Sets add-on is now integrated
into Blender itself. Rigify has been updated to no longer check for the
add-on, but just assume that the functionality is available.
The keymap is still the same, and so are all the class names. This
ensures that there are no conflicts when people still have the old
add-on enabled somehow. And there is versioning code to remove the
'add-on enabled' state so that Blender won't complain it cannot find it
any more.
Compared to the add-on, the following changes are made:
- The 'bone' icon has been removed from the list of available selection
sets. It was the same for each entry anyway, and thus didn't provide
any information.
- The code has been split up into multiple files, with the UI elements
in `scripts/startup/bl_ui/properties_data_armature.py` and the
operators in `scripts/startup/bl_operators/bone_selection_sets.py`.
- Helper functions and classes are prefixed with `_` to indicate that
they are not part of any public API.
- The `Operator` helper subclasses have been transformed to mix-in
classes. This way the only subclasses of `Operator` are the actual
operators.
- Comments & descriptions have been updated for clarity & consistency.
This commit contains code by the following authors, ordered by number of
commits in the original add-on repository, highest first:
Co-Authored By: Ines Almeida <britalmeida@gmail.com>
Co-Authored By: Sybren A. Stüvel <sybren@stuvel.eu>
Co-Authored By: Campbell Barton <ideasman42@gmail.com>
Co-Authored By: meta-androcto <meta.androcto1@gmail.com>
Co-Authored By: Demeter Dzadik <Mets>
Co-Authored By: lijenstina <lijenstina@gmail.com>
Co-Authored By: Brecht Van Lommel <brechtvanlommel@gmail.com>
Co-Authored By: Aaron Carlisle <carlisle.b3d@gmail.com>
For the full history see the original add-on at:
https://projects.blender.org/blender/blender-addons/commits/branch/main/bone_selection_sets.py
Reviewed On: https://projects.blender.org/blender/blender/pulls/124343
- Suppress pylint warnings via comments or be minor changes.
- Any errors disabling add-ons before upgrading or uninstalling are now
reported to the operators.
- Disable cyclic import warning is it's impractical to resolve.
- Enable useless-suppression warning.
The `[build.generated]` section now includes a filtered list of wheels
to simplify checking existing wheels on the server.
Also disallow quotes & control characters in wheel paths because they
already shouldn't be used and doing so would cause escaping issues in
the generated TOML.
Implements #124242.
Exceptions need be caught and forwarded so they show it in Blender's
interface. While most common errors where accounted for, various IO
errors & malformed JSON/TOML could cause internal operations to fail
with unhandled exceptions.
Use UILayout::template_popup_confirm to replace workarounds that didn't
work very well.
- Resolve "Add Repository..." button in the dialog not closing the
popup when pressed.
- Add a "Cancel" button while the remote resository data is
downloading.
- Remove the hack to scale the UILayout to hide the existing
confirm/cancel buttons.
Resolves#124098.
Some errors were reported as warnings because they didn't prevent the
operation from completing (such as failing to remove some paths when
uninstalling).
Change message types for the extensions internal command line program:
- Add "fatal error" to use when an operation fails and exits with a
non-zero error code.
- Use "error" when an operation fails which doesn't prevent other
actions from succeeding.
- Use "warn" reporting issues what don't prevent the operation
from completing but may cause problems.
When dropping an extension into Blender, check if the extensions is
part of a remote repository which is then used to set the default
repository.
This makes it more convenient to download larger extensions from
remote repositories using a web-browser & drop them into Blender after,
rather than dropping the URL directly into Blender.
- Operator descriptions use tip_() since they will be displayed in
tooltips.
- Extension messages:
- Split "(Add-on|Theme) \"{:s}\" already installed!" into two
messages.
- Use rpt_() to translate error messages.
- Restore core add-on name and description translation.
- Use DATA_ to translate paint material slot name, so that translation
happens only if the user enabled it for user-created data.
- Node Wrangler contains functions used to build operators' poll
methods. This change allows them to be properly translated by using
str.format() instead of f-strings, and explicit extraction with
tip_().
Pull Request: https://projects.blender.org/blender/blender/pulls/123795
Enforce tags from extensions.blender.org with support for using an
alternate set of tags (for other repositories), or no tag validation
at all if the repositories choose not to enforce this.
- By default building & validating an extensions fails when unknown
tags are used.
- The option `--valid-tags`` has been added which can either:
- Reference a JSON file which lists valid tags per extension type.
- Pass in an empty string to disable tag validation.
Default to constraining packages to use Blender's official tags as every
extension defining their own tags is likely to result in many similar
tags & a bad user experience. Details in code-comments.
Implements #123986.
- Report when a repository is added since it's not so clear from the
popup that a new repository has been added.
- Fix for missing redraw after selecting all/none tags.
- Also access the tags property once instead of getting it for each
button.
Changes the the extension repositories in the preferences while
update notifications were running could raise an exception.
Resolve by only calculating outdated extensions for
repositories that still exist.
Previously add-ons were sorted by category & name, remove the category
only sorting by name since the category is no longer displayed and
isn't part of extension meta-data. Now the add-ons are sorted by name
(case insensitive).
Details:
- Store add-ons modules sorted to avoid having to sort on every redraw.
- addon_utils.modules() now returns an iterator.
The "repository" in links from the generated HTML was only valid when
the URL did not contain a path component.
Resolve by supporting relative "repository".
This simplifies referencing the JSON from a generated HTML since
a relative link doesn't need to know the repositories absolute URL
to the destination.
Extensions with a manifest that can't be parsed caused can exception
in the add-ons UI.
Account for errors loading the manifest, falling back to dummy values
& show a warning that the exceptions manifest could not be parsed.
