Having this setting stored in the image space caused low level selection
logic to have to pass around the image space (which could be NULL
in some cases). Use the tool-settings instead since there doesn't seem
to be much/any advantage in having this setting per-space.
This adds a new sculpt mode to the experimental new curves object.
Currently, this mode can only be entered and exited, nothing else.
The main initial purpose of this node will be to use it for hair grooming.
The patch also adds the `editors/curves/` directory for the new curves
object, which will be necessary for many other things as well.
I added a completely new mode (`OB_MODE_SCULPT_CURVES`), because
`OB_MODE_SCULPT` seems to be rather specific to meshes, and reusing
it doesn't seem worth the trouble. The tools/brushes used in mesh vs.
curves sculpt mode are quite distinct as well.
I had to add DNA_userdef_enums.h to make the patch compile with C++
(forward declaration of enums isn't allowed). This follows the same
pattern that we use for other enums in dna.
Differential Revision: https://developer.blender.org/D14107
The path calculation method for animation players: frame-cycler, rv &
mplayer would fail when the number of digits exceeded the range of a
32bit int causing RenderData.frame_path() to raise a ValueError.
Use a simpler method of extracting the range that uses the sign to
detect the beginning of the number.
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
The animation playback did not take into account individual stereoscopic views.
This patch fixes this by playing back the active view render.
Reviewed By: campbellbarton
Maniphest Tasks: T91423
Differential Revision: https://developer.blender.org/D14070
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Order copyright immediately after the license block,
this was done almost everywhere with a few exceptions.
Remove authors from a few files (we had already removed "Contributors"
section however with old patches being applied this gets added back in).
Also move descriptive text into the doxygen comment block under \file.
In some cases remove the text as it was accidentally copied.
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
Use the global F2 rename panel for the NLA editor to rename NLA strips.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D12300
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
c9d9bfa84a caused a regression in when
the right-mouse select action was set to "Select & Tweak" (default).
Now the fallback tool works with RMB select as it did before.
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
We have this node for shader and geometry nodes. Compositor can also
work with vectors, and this can help with that.
Reviewed By: manzanilla
Maniphest Tasks: T95385
Differential Revision: https://developer.blender.org/D12919
Some items on the Quick Setup screen can be truncated with some
languages and/or with High DPI monitors. This patch adjusts column
sizes and turns off the expand on Spacebar options, making everything
fit a bit better.
See D9853 for more details.
Differential Revision: https://developer.blender.org/D9853
Reviewed by Julian Eisel
For node groups there is no good default preview generation.
Nevertheless, t would be useful to generate a preview image for a
node group by rendering an object in some cases.
This commit adds a new operator that allows updating the preview
image for the active asset by rendering the active object.
Note, the operator can also be used for other asset types, not just
node groups.
The operator can be found in a menu right below the refresh-preview
button. Currently it is the only operator in that menu. In the future,
more operators to create previews may be added.
Differential Revision: https://developer.blender.org/D13747
This implements a merge by distance operation for point clouds.
Besides the geometry input, there are two others-- a selection
input to limit the operation to certain points, and the merge
distance. While it would be a reasonable feature, the distance
does not support a field currently, since that would make
the algorithm significantly more complex.
All attributes are merged to the merged points, with the values
mixed together. This same generic method is used for all attributes,
including `position`. The `id` attribute uses the value from the
first merged index for each point.
For the implementation, most of the effort goes into creating a
merge map to speed up attribute mixing. Some parts are inherently
single-threaded, like finding the final indices accounting for the
merged points. By far most of the time is spend balancing the
KD tree.
Mesh support will be added in the next commit.
Differential Revision: https://developer.blender.org/D13649
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
The Equalize Handles operator allows users to make selected handle
lengths uniform: either respecting their original angle from the key
control point or by flattening their angle (removing the overshoot
sometimes produced by certain handle types).
Design: T94172
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D13702
Fixes T93680
For current drivers of Intel HD Graphics 4400 and 4600, various Program Introspection functions appear broken and return incorrect values, causing crashes in the current handling of SSBOs. Disable use of this feature on those devices. Add checks to features that use SSBOs (Hair and Subdivision Modifier).
Reviewed By: fclem, jbakker
Maniphest Tasks: T93680
Differential Revision: https://developer.blender.org/D13806
This patch introduces an extrude node with three modes. The vertex mode
is quite simple, and just attaches new edges to the selected vertices.
The edge mode attaches new faces to the selected edges. The faces mode
extrudes patches of selected faces, or each selected face individually,
depending on the "Individual" boolean input.
The default value of the "Offset" input is the mesh's normals, which
can be scaled with the "Offset Scale" input.
**Attribute Propagation**
Attributes are transferred to the new elements with specific rules.
Attributes will never change domains for interpolations. Generally
boolean attributes are propagated with "or", meaning any connected
"true" value that is mixed in for other types will cause the new value
to be "true" as well. The `"id"` attribute does not have any special
handling currently.
Vertex Mode
- Vertex: Copied values of selected vertices.
- Edge: Averaged values of selected edges. For booleans, edges are
selected if any connected edges are selected.
Edge Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected extruded
edges. For booleans, the edges are selected if any connected
extruded edges are selected.
- Duplicate edges: Copied values of selected edges.
- Face: Averaged values of all faces connected to the selected edge.
For booleans, faces are selected if any connected original faces
are selected.
- Corner: Averaged values of corresponding corners in all faces
connected to selected edges. For booleans, corners are selected
if one of those corners are selected.
Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected selected
edges, not including the edges "on top" of extruded regions.
For booleans, edges are selected when any connected extruded edges
were selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
Individual Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of the two neighboring
edges on each extruded face. For booleans, edges are selected
when at least one neighbor on the extruded face was selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
**Differences from edit mode**
In face mode (non-individual), the behavior can be different than the
extrude tools in edit mode-- this node doesn't handle keeping the back-
faces around in the cases that the edit mode tools do. The planned
"Solidify" node will handle that use case instead. Keeping this node
simpler and faster is preferable at this point, especially because that
sort of "smart" behavior is not that predictable and makes less sense
in a procedural context.
In the future, an "Even Offset" option could be added to this node
hopefully fairly simply. For now it is left out in order to keep
the patch simpler.
**Implementation**
For the implementation, the `Mesh` data structure is used directly
rather than converting to `BMesh` and back like D12224. This optimizes
for large extrusion operations rather than many sequential extrusions.
While this is potentially more verbose, it has some important benefits:
First, there is no conversion to and from `BMesh`. The code only has
to fill arrays and it can do that all at once, making each component of
the algorithm much easier to optimize. It also makes the attribute
interpolation more explicit, and likely faster. Only limited topology
maps must be created in most cases.
While there are some necessary loops and allocations with the size of
the entire mesh, I tried to keep everything I could on the order of the
size of the selection rather than the size of the mesh. In that respect,
the individual faces mode is the best, since there is no topology
information necessary, and the amount of work just depends on the size
of the selection.
Modifying an existing mesh instead of generating a new one was a bit
of a toss-up, but has a few potential benefits:
- Avoids manually copying over attribute data for original elements.
- Avoids some overhead of creating a new mesh.
- Can potentially take advantage of future ammortized mesh growth.
This could be changed easily if it turns out to be the wrong choice.
Differential Revision: https://developer.blender.org/D13709
With object collection properties open there was a huge delay when
switching active objects in a large scene, (~10k objects, ~5m vertices).
This is due to a non-optimal function to query all the collections the object is in.
To solve this the code can be simplified by using `bpy.types.Object.users_collection`
This returns all the collections the object is in removing the need to compute this in python.
This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
