Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This implements the update cache described in T95401.
The cache is currently only used for drawing strokes and
sculpting (using the push brush).
**Note: Making use of the cache throughout grease pencil will
have to be done incrementally in other patches. **
The update cache stores what elements have changed in the
original data-block since the last time the eval object
was updated. Additionally, the update cache can store multiple
updates to the data and minimizes the number of elements
that need to be copied.
Elements can be tagged using `BKE_gpencil_tag_full_update` and
`BKE_gpencil_tag_light_update`. A full update means that the element
itself will be copied but also all of the content inside. E.g. when a
layer is tagged for a full update, the layer, all the frames inside the
layer and all the strokes inside the frames will be copied.
A light update means that only the properties of the element are copied
without any of the content. E.g. if a layer is tagged with a light
update, it will copy the layer name, opacity, transform, etc.
When the update cache is in use (e.g. elements have been tagged) then
the depsgraph will not trigger a copy-on-write, but an update-on-write.
This means that the update cache will be used to determine what elements
have changed and then only those elements will be copied over to the
eval object.
If the update cache is empty or the data block was tagged with a full
update, we always fall back to a copy-on-write.
Currently, the update cache is only used by the active depsgraph. This
is because we need to free the update cache after an update-on-write so
it's reset and we need to make sure it is not freed or read by other
depsgraphs.
Co-authored-by: @yann-lty
This patch was contributed by The SPA Studios.
Reviewed By: sergey, antoniov, #dependency_graph, pepeland, mendio
Maniphest Tasks: T95401
Differential Revision: https://developer.blender.org/D13984
This is almost always meaningless as most code has changed
since the comment was added. Besides this, version control can be used
to check if/when a file was modified.
Some cases of this were kept when they contain details
about the original copyright holder.
Viewport cull bones during selection to avoid depth-picking
reading the depth buffer for bones that aren't in the viewport.
Files with thousands of bones could hang blender for seconds while
selecting. The issue could still happen with overlapping bones or when
zoomed out so all bones are under the cursor, however in practice this
rarely happens.
Now files with many bones select quickly.
Related changes include:
- Split `BKE_pchan_minmax` out of `BKE_pose_minmax`.
- Add `mat3_to_size_max_axis` to return the length of the largest
axis (used for scaling the radius).
Reviewed By: sybren
Maniphest Tasks: T91253
Ref D13990
Every translation unit that included the modified headers generated
some extra code, even though it was not used. This adds unnecessary
compile time overhead and is annoying when investigating the
generated assembly.
Previously, these methods used the more generic substring-finding
algorithm, which is more complex and slower.
Using the more specialized methods results in a noticable speedup
in the obj importer (D13958).
Differential Revision: https://developer.blender.org/D14012
Adding better support for drawing huge images in the image/uv editor. Also solved tearing artifacts.
The approach is that for each image/uv editor a screen space gpu texture is created that only contains
the visible pixels. When zooming or panning the gpu texture is rebuild.
Although the solution isn't memory intensive other parts of blender memory usage scales together with
the image size.
* Due to complexity we didn't implement partial updates when drawing images tiled (wrap repeat).
This could be added, but is complicated as a change in the source could mean many different
changes on the GPU texture. The work around for now is to tag all gpu textures to be dirty when
changes are detected.
Original plan was to have 4 screen space images to support panning without gpu texture creation.
For now we don't see the need to implement it as the solution is already fast. Especially when
GPU memory is shared with CPU ram.
Reviewed By: fclem
Maniphest Tasks: T92525, T92903
Differential Revision: https://developer.blender.org/D13424
Assert when "//" prefixed relative paths are passed to
BLI_path_cmp_normalized as this can't be expanded
and it's possible the paths come from different blend files.
Changes to recent addition: c85c52f2ce.
Having both BLI_paths_equal and BLI_path_cmp made it ambiguous
which should be used, as `BLI_paths_equal` wasn't the equivalent to
`BLI_path_cmp(..) == 0` as it is for string equals macro `STREQ(..)`.
It's also a more specialized function which is not used for path
comparison throughout Blender's internal path handling logic.
Instead rename this `BLI_path_cmp_normalized` and return the result of
`BLI_path_cmp` to make it clear paths are modified before comparison.
Also add comments about the conventions for Blender's path comparison
as well as a possible equivalent to Python's `os.path.samefile`
for checking if two paths point to the same location on the file-system.
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
This can simplify iterating through all of the indices in the vector,
which is fairly common, since one of the benefits of the data structure
is that all values are contiguous.
Part of a5cb7c1e62 is reverted since it
created unknown pragma warning on windows.
Use a trick to do self-assigning.
Reviewed by Jacques Lucke in chat.
Fix assignment warning
source/blender/blenlib/tests/BLI_any_test.cc:56:5: warning: explicitly
assigning value of variable of type 'blender::Any<void, 8, 8>'
to itself [-Wself-assign-overloaded]
c = c;
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13835
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
