2 Bugfixes:
* EKEY in Timeline changed start frame of Preview Range too. Reported by slikdigit
on IRC
* SKEY in Timeline also didn't work correct as it was changing the end frame.
New Feature:
* Now OGL preview-render obeys Preview-Range settings.
Preview Range is a useful tool for animating (espcially on longer timelines). It allows you to only run through a limited set of frames to quickly preview the timing of a section of movement without going through the whole timeline. It means you don't have to set/reset start/end frame for rendering everytime you wish to only preview a region of frames.
Hi Ton,
Attached is a patch (I know you've already got lots of them in the tracker ;-) ) for a feature that I've sometimes wanted. It seems that this sort of thing is supported in other packages, but I can't be sure.
Note: I may have left in a few bits and pieces I didn't mean to in the patch (this is off a source tree which had quite a few revisions in it, all of which was experimental)
== Preview Range ==
Preview range is useful for animating (espcially on longer timelines). It allows you to only run through a limited set of frames to quickly preview the timing of a section of movement without going through the whole timeline. It means you don't have to set/reset start/end frame for rendering everytime you wish to only preview a region of frames.
* 'Ctrl P' in Action/NLA/Timeline sets preview range. Click+drag to form selection-box defining region of frames to preview
* 'Alt P' in Action/NLA/Timeline to clear preview range
* 'Pre' button beside Start/End fields in timeline toggles whether start/end fields refer to scene or preview
* 'Ctrl Rightarrow' and 'Ctrl Leftarrow' jump to start/end of preview region when it is set
* 'S' and 'E' set the start/end frames of preview region when it is set (just like normally) in Timeline only
* In Action/NLA editors, frames out of preview region are now drawn darkened when preview-region is set
See the following page for more info later:
http://wiki.blender.org/index.php/User:Aligorith/Preview_Range
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
frame set higher than End: frame
The end frame should not be allowed to have a value less
than the start frame. This commit sets the minimum allowable
value of the end frame button in the Anim panel and the timeline
to the start frame value.
Ton/Matt - if there is a good reason to not do this, feel free to
revert it back.
Now time-markers work in all time-related spaces (i.e. Ipo,
Action Editor, NLA editor, TimeLine, Sound). The hotkeys and
functionality set should be the same for each of these modes
(with a few exceptions still). I've had to change a few hotkeys
here and there, so hopefully they aren't too bad.
Marker Operations:
MKEY - Add Marker
SHIFT MKEY - Rename marker (was CTRL MKEY)
XKEY - Delete Marker
PAGE UP - Jump to next marker
PAGE DOWN - Jump to previous marker
CTRL A - Select all markers
SHIFT G - Transform markers (NLA, IPO, Action)
G - Transform markers (Sound, Timeline)
CTRL SHIFT D - Duplicate markers (NLA, IPO, Action)
SHIFT D - Duplicate markers (Sound, Timeline)
BKEY - select markers and other keyframes (if any)
I've also made a few little tool additions to NLA and Action editors:
* NLA editor - Snap To Frame.
Now with the option to offset strip so that it starts at the current frame.
Added menus for this.
* Action editor - Snap To Frame
A few new menus for this too
Patch #4044 patch to change the step when changing frame with up or down arrow keys.
This adds a per Scene setting to specify the number of frames skipped by the up and down arrow.
This setting can be changed in the Timeline header and in the Anim/Playback section of the Scene settings.
Upon loading a file without that setting or creating a new scene, it is set to 10
Also fixed the Start and End frame buttons in the Scene buttons to do a proper refresh.
This patch is mostly a usability patch for the sequencer, mainly written by
Anders Gudmundson and twisted a little bit by me.
- Lock Time to other windows
- Possibility to switch the X-Axis between frames and seconds-display
- IPO-Frame Locking for plugins (T-Key)
- Additional Popup to add HD-Sound and Movie at once
- In Timeline-Window: Sequencer windows only playback
- Make the IPOs a little bit IPO-Frame-Lock friendlier (doesn't jump;
the frame that is drawn has the right dimension)
- Wheel-Mouse buttons make the sequencer window zoom again.
- The "This is not a sound/movie-file message" now reads "... or
FFMPEG-support not compiled in!" since I learned some prominent
people who complained, that hdaudio does not work for them ;-)
- Make SPACEKEY open up the "Add Strip"-Popup on the timeline and start
playback in the preview window.
* Large sequencer rewrite to support:
- Audio-tracks, which are not completely loaded into memory (hdaudio) but
kept on disk instead.
- A dependency tree, that builds only the Imbufs, that are really needed
- Cleaner sequencer code
- Per instance data in sequencer plugins (without this, the Dynamic
Noise Reduction plugin would be impossible)
- A Luma Waveform display
- A U/V scatter plot display
- Memcache limiting in sequencer
- Buttons changed according to the boosted framecount limit
windows. If set (in View pulldown), it synchronizes the horizontal scale of
the current window with the other Windows with this option set. That way
you always have these windows showing an identical part of the time you
work on.
Also added because Action Window now displays its content relative to
NLA strips.
- added support for vector icons, from user API side is just like using
a regular icon... on icon side is defined by a function in resources.c
instead of using the blenderbuttons png file. vector icons are much
easier to add and scale properly. intent is that vector icons would
be drawn in window coordinates which lets icon developers make the
most beautiful icons, but this requires some tweaking of the interface
drawing that I am not going to do atm.
- changed BIF_draw_icon* to take coordinates of where to draw icon instead
of using passed in raster position
- switch modifier UI to using vector icons, and tweaked some position and
style stuff.
- replaced most uses of UI_EMBOSSX with UI_EMBOSS (do same thing, just there
to confuse people I guess)
After the window coordinate stuff is sorted out with vector icons
it probably makes sense to move all non-photorealistic icons in blenderbuttons
to vector form just so scaling goes better.
- switched almost all uiDefBut(..., TOG|BIT|..) to use UiDefButBit and the
name of the actual bit define instead of just a magic constant, this makes
searching the code much nicer. most of the credit here goes to LetterRip
who did almost all of the conversions, I mostly just checked them over.
feature with a header button.
Works like audio playback on ALT+A, meaning you have to add the audio
strips in Sequencer. The 'only sync' option for ALT+A doesn't work here.
Also: fixed crash on ESC in audio playback in sequencer.
Using the Play button in timeline, now uses an event-driven system to
update the animation system and signal windows to redraw. Meaning the
full UI remains responsive!
Check the new Pulldown "Playback" to set which windows you like to see
updated. Same settings is used for LMB 'dragging' frames in Timeline.
Implementation notes;
- the Icon for 'Pause' (or stop) has to be made yet, I commit this from
my laptop... all was coded during a 2 x 5 hour train ride to germany
- the anim playback system (ALT+A too) now uses correct "frames per
second" as maximum speed. Buttons can be found in 3 places in the UI,
also added it as pulldown item
- The system works with 'screen handlers', which has been coded with
using Python (networked) events or verse in mind too. A doc on that
will follow.
- the buttons code has been made 'resistant' to animated UIs too,
preventing flashing of hilites.
- All subloops (like transform) stop playback, with exception of MMB
view manipulations.
As extra; found tweak to make Textured AA fonts draw without distortion.
Looks perfect here on laptop now (like Pixmap fonts) and is 20x faster.
- TimeLine: Marker grabbing works now. Use GKEY or select+drag, as usual
Holding CTRL will step with 1 second (corrected for ntsc dudes yes!)
Also added this in header pulldown
- Time values and Time grid draw fixed for Seconds display. It used to
draw steps of 2/5/10/20/50/100 etc. frames. Now does steps in seconds.
Again corrected for "Frames/Sec" value.
- "Frames/Sec" button redraws TimeLine, Secquencer, etc
- Bug fixed in editing Theme for TimeLine (was editing Image Select...)
- Added Grid color to Theme choices for Ipo, TimeLine, Sequencer, NLA,
Action, Sound. Was missing!
- Added Ckey for 'center view around current frame'.
- Completed View pulldown menu with remainder of options.
- prevented negative scaled views when start > end frame
- Using Arrowkeys to change frames didn't give proper redraw
- Option "Record" now tied to the User-preset "Auto key insert". It is
no user preset anymore even, I thought to leave a button in the User-
presets for the time being though...
Main change is that it's an own Space type now, not part of the Audio
window... the audio window should restrict to own options. This way
functionality is nicely separated.
Since it's the first time I added a new space (since long!) I've made an
extensive tutorial as well. You can find that here:
http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html
Notes for using timewindow;
- Add time markers with MKey
- CTRL+M gives option to name Marker
- Markers cannot be moved yet...
- Pageup-Pagedown keys moves current frame to next-prev Marker
- Xkey removes Markers
- If an object has Ipos or an Action, it draws key lines
- CTRL+Pageup-Pagedown moves current frame to next-prev Key
- Press S or E to set start/end frame for playback
Notes about the implementation in Tuhopuu:
- Add new Marker now selects new, deselects others
- Selecting Marker didn't work like elsewhere in Blender, on click it
should deselect all, except the indicated Marker. Not when holding SHIFT
of course
- Not exported functions are static now
- Removed unused defines (MARKER_NONE NEXT_AVAIL)
- Drawing order was confusing, doing too many matrix calls
- Removed not needed scrollbar, added new function to draw time values.
(Has advantage the MMB scroll works not confusing on a scrollbar)
- Added proper support for 'frame mapping'
- The string button (name Marker) had a bug (checked str[64] while str
was only 64 long)
- String button itself didn't allow "OK on enter"
- Made frame buttons in header larger, the arrows overlapped
- Removed support for negative frame values, that won't work so simple!
