Operators that trigger UI events (but nothing else)
were using 'CANCELLED' making it impossible to tell if an invoke
function failed, or opened a menu.
This adds a theme option for the embossing of UI widgets. By doing this users have much greater flexibility for creating nice themes. Previously many themes (particularly dark ones) looked quite bad due to the very obvious emboss. This made simpler, flat-style themes very challenging.
Closes T42228
Reviewed by @campbellbarton
Organize Maximize/Fullscreen mess and add a new fullscreen mode with no UI
* Maximize Editor: (old Ctrl+Up)
* Full Screen Window: (old Alt + F11)
* Full Screen Editor: new operator (Alt + F10)
* Change Show/Hide Header: (Alt + F9)
When the mode is on moving the mouse near the top right corner of the
editor shows an icon to go back to the normal editor mode.
This was originally intended for the multiview branch, but this
functionality also benefits non-stereo workflows, thus it can be
reviewed and committed independently.
Development notes:
* This includes cleanups in the code to sanitize the naming of
fullscreen/maximize across the window/editor code.
* Originally the idea was to make the window fullscreen as well, but
this idea was dropped.
* You can see the clicking area when debug is 1
* Technically the user can be left with an unfaded icon in the corner
(specially when using a tablet). If we think this is too bad we can
increase the action zone to be the whole screen, or something similar.
Reviewers: campbellbarton [1], ton [2], fsiddi [2]
[1] actual code review
[2] design review
Differential Revision: https://developer.blender.org/D678
The nodes wire was using 'TH_HEADER' flag to get its color and thus would be in sync with the header. Now make it so it uses its 'own' flag (actually 'TH_SYNTAX_R', the only TH_SYNTAX_* which wasn't yet used by the nodes).
Also expose the setting to the user so it can be themified.
This fixes T42209
Reviewers: lukastoenne
Reviewed By: lukastoenne
Maniphest Tasks: T42209
Differential Revision: https://developer.blender.org/D827
quit.blend.
This will use a slower file write if an object is in edit or sculpt
mode.
Autosaving will explicitly not be supported to keep it fast.
Added a tooltip warning.
Attempt to select closest bones when possible.
Occlusion query selection does't support this well because we can't
really derive depth information from occlusion tests. May be possible to
improve this somewhat in the future.
Issue, after a lot of blood sweat and tears, was found in
ui_but_update_from_old_block, where we restore a button to its old
values when possible. The problem here is that a1 and a2 are not really
meant to store temporary variables, because they tend to get overriden
and palette selection is one of those temporary states.
Instead, we now store the position of each button in the palette in a2
and pointer to the palette in the customdata pointer of each button and
use that to test if it's active. The positions won't change when
clicking so we are guaranteed that the old button won't override the new
one with garbage.
It's still hacky but it is better than testing button types when copying
old values.
- Drawing grease pencil fail without scene-lock.
- Converting to curve failed without scene-lock.
- Outliner drag into viewport failed with local-view.
Turned out there were several issues in handling of scale parameter by numinput.
Fixed that by factorizing more some code in common with 'usual' numbuttons eval code
(new `bUnit_getScaleUnit()` helper will return valid scaled value, depending on
given system and type).
Now, numinput behaves as expected - using default unit amended by scale in case no unit is given
(i.e. entering '20' with a scale of 0.01 will give you 20cm, and '20cm' as well!).
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
The issue was caused by the render engine loading edit mesh, which re-allocates
mesh array which might be referenced by other object's derived meshed.
Worst thing about this is that updating render engine happens from the end of
scene update function, after all the objects are updated and so. This is needed
so render engine gets the update objects which is correct.
The only proper way to solve the issue is to make it so viewport engine does not
leave objects in inconsistent state, meaning nobody will reference to freed data.
In order to reach this we do edit mesh loading before running objects update so
all the objects which uses that mesh will have proper references in the derived
mesh.
This also solves old creepyness which happened before when having single object
in edit mode. tweaking it will calculate derived mesh as a part of scene update,
then this derived mesh will be freed by edit mesh loading and viewport will be
creating derived mesh again.
Now render engine is expected to do nothing with meshes which are in edit mode,
but they still need to load edit data for non0meshes. It's not really easy to
do from the BKE level because needed functions are implemented in the editor.
Thanks Campbell for the review!
Differential Revision: https://developer.blender.org/D697
Turns out to be mostly some cleanup in Pose select code, got rid of magic numbers
(now understand usual SEL_xxx enums) in ED_pose_deselectall(), which was renamed
to ED_pose_de_selectall, and have a new bool parameter to ignore visibility status
in its process (was the root of the reported issue).
Also factorized slightly "(de)select all" code. Yet this area could use much more
cleanup probably...
If the active image node contributes to the final material shader
(meaning it's either directly or indirectly connected to an Output Node)
the user will receive an alert about circular dependency.
Similar to what we do for Blender internal the baking will still happen,
but the user will receive the alert which should prevent the image
saving to happen if the result was not intentional.
Core function to check for node output written by Lukas Toenne.
Reviewers: lukastoenne, campbellbarton
Differential Revision: https://developer.blender.org/D673
This patch creates an interface for selection mechanisms in opengl. This
makes it possible to switch between occlusion query based or select
rendermode based selection transparently.
This is really useful on graphics drivers that do not accelerate the
select rendermode path (some ATI cards are notorious for this, and the
new path is used by default there), since occlusion queries are always
hardware accelerated due to their use in games.
The option can be found under system - selection. Auto just enables
occlusion queries for ATI users while the rest of the options enforce
one of the two methods always.
There is just one known change, previous code enforced nearest bone to
always get selected, even when mouse selecting near the same position, I
couldn't replicate the behaviour though.
patch by me with edits and review by Campbell.
Thanks!
Rename UI_init_userdef_factory to BLO_update_defaults_userpref_blend
This closely matches BLO_update_defaults_startup_blend so makes sense for them to be together.
Yep, at last it's here!
There are a few minor issues remaining but development can go on in
master after discussion at blender institute.
For full list of features see:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.72/Painting
Thanks to Sergey and Campbell for the extensive review and to the
countless artists that have given their input and reported issues during
development.
Preserve buffer form previous runs so it's possible to make
a compo of full frame, then draw a border and start tweaking
nodes and see updates in that border.
Main idea is to make it able to visually compare difference
between what was changed inside the border and how frame
looked before the tweaks outside of the border.
Also implemented Clear Viewer Border in compositor, shortcut
it Ctrl-Alt-B.
Reviewers: lukastoenne, jbakker
CC: venomgfx, sebastian_k
Differential Revision: https://developer.blender.org/D582
Looks like the cleanest way to handle this is to no do bounding box collision
for edit mode at all. But this is easy to enforce
This reverts commit 7b5fe4f316.
Conflicts:
source/blender/editors/transform/transform_snap.c
This is needed for popups to chance state once activated,
currently it makes use of operators `check` callback, after values are modified,
as the file selector does already.
slightly outside the mesh.
Reported by Thomas Beck on irc. Issue here is that the mesh bounding box
changes as we are transforming the vertices. Solution is to collide
against the initial bounding box. Unfortunately the snapping functions
are made in a way that a lot of code needed to be tweaked here, but the
change should be straightforward and harmless (famous last words, I
know).
Ideally we might want to even increase the size of the bounding box a
little (as seen in screen space) to allow snapping even in cases where,
cursor is slightly outside the bounding box, but since this is not so
straightforward to do for all cases, at least for me, leaving this as
a TODO.
Undoing nodes that do not belong to the current object will cause the
saved bmesh log entry to be reverted instead. This entry can belong to
another object though.
This is easy to fix by enforcing name matching (this was borrowed by
edit mode but can definitely be improved) between current object name
and undo node name and deleting older entries.
However there are complications. Deleting dyntopo entries in this way
can leave a brush stroke as first dyntopo log entry. This can present
issues if we attempt to delete that entry since it's deleted mesh
elements may now have had their ids (which would still be valid at the
time) cleaned up. This can result in crashing if we attempt to resculpt
on the mesh. To fix this I have disabled releasing the deleted entries.
This entanglement between bm_log and undo is quite volatile but I hope
the system works better now.
Also minor cleanup, fix unneeded check warning
This makes it easier for finding the active or first selected channel
(where actual data channels need to be favoured over expanders - which come
first), as previously, long switch statements were needed everytime.
