Adds a dropdown for the Library Overrides display mode that lets users
choose between a "Properties" and a "Hierachies" view mode. The former
is what was previously there (a mode that displays all overridden
properties with buttons to edit the values), the latter is new. It
displays the hierarchical relationships between library overridden
data-blocks. E.g. to override the mesh of an object inside a linked
collection, the entire collection > object > mesh hierarchy needs to be
overridden (whereby the former two will be automatically overridden
using system overrides).
The Hierarchies mode will also show the override hierarchies of
data-blocks that were linked and are overridden in the source file. This
information is useful to have, especially for debugging scenes.
Part of T95802.
Differential Revision: https://developer.blender.org/D14440
Reviewed by: Bastien Montagne
This adds a new operator that converts all selected curves objects
into hair particle systems on their respective surface objects. Existing
particle systems with the correct name are updated, otherwise a new
particle system is added.
The purpose of the operator is the make the new curve sculpting tools
useful even before all functionality is ported over from the old hair system.
The operator can be found in the `Object > Convert` menu in object mode,
when a curves object is active.
Differential Revision: https://developer.blender.org/D14441
The current behaviour is to prevent multi-user data from having its
transformation applied.
However in some particular cases it is possible to apply them:
* If all the users of the multi-user data are part of the selection.
* If not all the users are in the selection but the selection is made
single-user.
The active object is used as reference to set the transformation of the
other selected objects.
Note: For simplicity sake, this new behaviour is only available if all
the selection is using the same data.
Differential Revision: https://developer.blender.org/D14377
Don't always create a new geometry nodes node tree when adding a
geometry nodes modifier.
This avoids files getting cluttered with empty and unused geometry node
trees that are created every time a nodes modifier is added to an
object - even if only to apply an already existing.
This is also more consistent with other modifiers that also don't
automatically create new data blocks.
The new modifier still automatically gets populated with a new node
tree when adding it via the "New" button in the header of the
geometry nodes editor.
Reviewed By: Hans Goudey, Dalai Felinto, Pablo Vazquez
Differential Revision: D14458
The "dupli" system now has a faster, more powerful, and more flexible
alternative with geometry nodes. Since the point cloud objects haven't
been exposed in the non-experimental UI yet, we can remove the dupli
implementation and the panel for the object type.
Differential Revision: https://developer.blender.org/D14482
so a layer can be occluded by the scene instead of always showing in front
---
{F12827163}
Reviewed By: fclem, antoniov
Differential Revision: https://developer.blender.org/D13931
There is a dedicated Library Override display mode now, and showing
these elsewhere just adds noise and makes the code problematic to
maintain (since the same element hierarchy will be used in two entirely
different contexts). The corresponding filter settings are removed too.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14411
Object mode selection does a kind of cycling that excludes the active
selected object. This is separate from regular selection cycling which
is enabled when clicking multiple times without moving the cursor.
This has the down-side that clicking on an object to drag it always
selects the object behind it (in the case of overlapping objects).
Since object mode selection is fundamental functionality, this is
exposed as an experimental preference for user feedback & testing.
See T96752 for details.
In my opinion Scale Thickness feels similar to Only Locations and was missing from the pie menu in grease pencil edit mode, so here I added it.
Differential Revision: https://developer.blender.org/D12530
New supported features:
* 3D/spherical brush that samples a good position on the curves.
* Falloff.
The custom falloff curve mapping is not yet available in the ui because that
requires some more ui reorganization. This is better done when we have
a better understanding of what settings we need exactly.
Currently, the depth of the 3d brush is only sampled once per stroke, when
first pressing LMB. Sometimes it is expected that the depth of the brush can
change within a single brush. However, implementing that in a good way
is not straight forward and might need additional options. Therefore that
will be handled separately. Some experimentation results are in D14376.
Ref T96445.
Differential Revision: https://developer.blender.org/D14376
The Output Properties > Output panel now has a Color Management subpanel to
override scene settings. When set to Override instead of Follow Scene, there
are settings to:
* For OpenEXR, choose a (linear) colorspace for RGBA passes
* For other file formats, use different display/view/look/exposure/gamma
These settings affect animation render output, image save of renders and the
compositor file output node. Additionally, the image save operator and
compositor file output nodes also support overriding color management.
Includes some layout changes to the relevant panels to accomdate the new
settings and to improve consistency. Ideally subpanels would be used to better
organize these settings, however nodes and operators don't currently support
creating subpanels.
Differential Revision: https://developer.blender.org/D14402
This adds a new Add brush for the new curves object type in sculpt mode.
The brush is used to insert new curves (typically hair) on the surface object.
Supported features:
* Add single curve exactly at the cursor position when `Add Amount` is 1.
* Front faces only.
* Independent interpolate shape and interpolate length settings.
* Smooth and flat shading affects curve shape interpolation.
* Spherical and projection brush.
This also adds the `surface_triangle_index` and `surface_triangle_coordinate`
attributes. Those store information about what position on the surface each
added curve is attached to:
* `surface_triangle_index` (`int`): Index of the internal triangle that a curve
is attached to. `-1` when the curve is not attached to the surface.
* `surface_triangle_coordinate` (`float2`): First two numbers of a barycentric
coordinate that reference a specific position within the triangle.
Ref T96444.
Differential Revision: https://developer.blender.org/D14340
This is supposed to hold the latest improvement from the EEVEE rewrite branch.
Note that a restart is necessary in order for the engine to appear.
The registration code is a bit convoluted as it needs to be after the WM_init.
Add a new operator to the Graph Editor that blends selected keyframes
to their default value.
The operator can be accessed from
Key>Slider Operators>Blend To Default Value
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9376
Ref: D9367
As the grease pencil simplify is a subotion of general simplify, if the general switch is disabled, the grease pencil simplify must be disabled too.
This patch also disable the UI panel.
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
This reverts commit 1558b270e9.
An earlier commit (rB101fadcf6b93c) introduced some new functionality,
which was overlooked in reviewing this commit & got broken.
Will re-commit after the issue has been fixed.
Ref: D13687
Previously, the popover menu in sculpt/texture paint mode did not
take into account the `UnifiedBrushSettings` for the unit.
To fix this, the behavior of `class _draw_tool_settings_context_mode` is matched
by checking the same conditions when setting up the UI of the right-click popover menu.
Fixes T81616
Reviewed By: #sculpt_paint_texture, pablodp606
Maniphest Tasks: T81616
Differential Revision: https://developer.blender.org/D9168
Before this patch, users had to switch render engines just to change how the
hair should be displayed in solid and material preview viewport shading modes.
Differential Revision: https://developer.blender.org/D14290
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
Issue was introduced after the python 3.10 switch
Explicit conversion to int will fix the issue.
Same issue is likely to happen with `MovieTrackingSettings.default_search_size`
So I did the same change over there.
Differential Revision: https://developer.blender.org/D14273
Support drag/drop of materials to Properties Material Slots.
See D13549 for more details.
Differential Revision: https://developer.blender.org/D13549
Reviewed by Julian Eisel
This patch adds edge selection support for UV editing (refer T76545).
Developed as a part of GSoC 2021 project - UV Editor Improvements.
Previously, selections in the UV editor always flushed down to vertices
and this caused multiple issues such as T76343, T78757 and T26676.
This patch fixes that by adding edge selection support for all UV
operators and adding support for flushing selections between vertices
and edges. Updating UV select modes is now done using a separate
operator, which also handles select mode flushing and undo for UV
select modes. Drawing edges (in UV edge mode) is also updated to match
the edit-mesh display in the 3D viewport.
Notes on technical changes made with this patch:
* MLOOPUV_EDGESEL flag is restored (was removed in rB9fa29fe7652a).
* Support for flushing selection between vertices and edges.
* Restored the BMLoopUV.select_edge boolean in the Python API.
* New operator to update UV select modes and flushing.
* UV select mode is now part of editmesh undo.
TODOs added with this patch:
* Edge support for shortest path operator (currently uses vertex path logic).
* Change default theme color instead of reducing contrast with edge-select.
* Proper UV element selections for Reveal Hidden operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12028
This patch adds a button in the scene to add a new one, but this does not change to the new created scene because this breaks the storyboarding workflow.
This is a common request for Storyboarding artists.
Reviewed By: mendio, brecht, ISS
Differential Revision: https://developer.blender.org/D14148
This adds a prototype for the first brush that can add new curves by
painting on a surface. Note that this can only be used when the curves
object has a surface object set in the properties panel.
The brush can take minimum distance into account. This allows
distributing curves with a somewhat consistent density.
Differential Revision: https://developer.blender.org/D14207
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
The Motion Paths operators are now also added to the Object context menu
and the Dopesheet context menu.
The scene range operator was removed, because the operators now
automatically find the range when baking the motion paths.
The clear operator now appears separated in "Selected Only" and "All",
because it was not clear for the user what the button was doing.
Reviewed By: sybren, looch
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
This adds a node with a boolean field output which returns true if all of the
points of the evaluated face are on the same plane. A float field input allows
for the threshold of the face/point comparison to be adjusted on a per face basis.
One clear use case is to only triangulate faces that are not planar.
Differential Revision: https://developer.blender.org/D13906
Recently we changed the build pipeline to always create a version
number in the url and point 'dev' to the latest version rather than creating the version number url once we release.
This makes the check to `bpy.app.version_cycle` unnecessary.
