This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
Currently there is no way to flip normals in geometry nodes. This node
makes that possible by flipping the winding order of selected faces.
The node is purposely not called "Flip Normals", because normals are
derived data, changing them is only a side effect. The real change is
that the vertex and edge indices in the face corners of every selected
polygon are reversed, and face corner attribute data is reversed.
While there are existing utilities to flip a polygon and its custom
data, this node aims to process an attribute's data together instead
of processing all attributes separately for each index.
Differential Revision: https://developer.blender.org/D13809
This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
This node allows accessing data of other elements in the context geometry.
It is similar to the Transfer Attribute node in Index mode. The main difference
is that this node does not require a geometry input, because the context
is used.
The node can e.g. be used to generalize what the Edge Vertices node is doing.
Instead of only being able to get the position of the vertices of an edge,
any field/attribute can be accessed on the vertices.
Differential Revision: https://developer.blender.org/D13825
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
Fixes issue T94603
It adds a new compositor node called Scene Time which is already present as a geo node, having the same basic nodes available in all node trees is a nice thing to have.
Renames "Time" node to "Time Curve", this is done to avoid confusion between the Time node and the Scene Time node.
Reviewed By: jbakker
Maniphest Tasks: T94603
Differential Revision: https://developer.blender.org/D13762
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
The main issue was the use of `G_MAIN` during file load.
This patch refactors the code so that iterating over `G_MAIN`
is not necessary anymore. See D13800 for more details.
Differential Revision: https://developer.blender.org/D13800
The value of this flag was only retrieved in `nodeGetActiveID`, which
wasn't used anywhere. Other than that, the `NODE_ACTIVE_ID` and
related functions seem to come from the Blender internal renderer.
Differential Revision: https://developer.blender.org/D13770
Compositor node to convert between color spaces.
Conversion is skipped when converting between the same color spaces or to or from data spaces.
Implementation done for tiled and full frame compositor.
Reviewed By: Blendify, jbakker
Differential Revision: https://developer.blender.org/D12481
This flag is only used a few small cases, so instead
of setting the flag for every node only set the
required flag for the nodes that require it.
Mostly the flag is used to set `ntype.flag = NODE_PREVIEW`
For nodes that should have previews by default which
is only some compositor nodes and some texture nodes.
The frame node also sets the `NODE_BACKGROUND` flag.
All other nodes were setting a flag of 0 which has no purpose.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13699
Calculates the angle in radians between two faces that meet at an edge.
0 to PI in either direction with flat being 0 and folded over on itself PI.
If there are not 2 faces on the edge, the angle will be 0.
For valid edges, the angle is the same as the 'edge angle' overlay.
For the Face and Point domain, the node uses simple interpolation to calculate a value.
Differential Revision: https://developer.blender.org/D13366
This function node creates a running total of a given Vector, Float, or
Int field.
Inputs:
- Value: The field to be accumulated
- Group Index: The values of this input are used to aggregate the input
into separate 'bins', creating multiple accumulations.
Outputs:
- Leading and Trailing: Returns the running totals starting
at either the first value of each accumulations or 0 respectively.
- Total: Returns the total accumulation at all positions of the field.
There's currently plenty of duplicate work happening when multiple outputs
are used that could be optimized by a future refactor to field inputs.
Differential Revision: https://developer.blender.org/D12743
`SOCK_IN_USE` is now set in `update_socket_used_tags` in
`node_tree_update.cc` when a node tree is changed.
It doesn't need to run every single redraw. Removing this
results in a small speedup of 0.4 ms when drawing a tree
with about 4000 nodes (from about 70 ms total).
Differential Revision: https://developer.blender.org/D13645
When copying a full node tree, we can avoid an O(n^2) loop finding a
unique name for every node if we assume they already have unique names.
That is a reasonable assumption, since unique names are verified
elsewhere when adding a new node.
Copying a node tree with about 4000 nodes took 42 ms before,
now it takes 6 ms.
Differential Revision: https://developer.blender.org/D13644
These pointers point to the new nodes when duplicating,
and their even used to point to "original" nodes for
"localized" trees. They're just a bad design decision
that make code confusing and buggy.
Instead, node copy functions now optionally add to a map
of old to new socket pointers. The case where the compositor
abused these pointers as "original" pointers are handled
by looking up the string node names.
Differential Revision: https://developer.blender.org/D13518
Goals of this refactor:
* More unified approach to updating everything that needs to be updated
after a change in a node tree.
* The updates should happen in the correct order and quadratic or worse
algorithms should be avoided.
* Improve detection of changes to the output to avoid tagging the depsgraph
when it's not necessary.
* Move towards a more declarative style of defining nodes by having a
more centralized update procedure.
The refactor consists of two main parts:
* Node tree tagging and update refactor.
* Generally, when changes are done to a node tree, it is tagged dirty
until a global update function is called that updates everything in
the correct order.
* The tagging is more fine-grained compared to before, to allow for more
precise depsgraph update tagging.
* Depsgraph changes.
* The shading specific depsgraph node for node trees as been removed.
* Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only
tagged when the output of the node tree changed (e.g. the Group Output
or Material Output node).
* The copy-on-write relation from node trees to the data block they are
embedded in is now non-flushing. This avoids e.g. triggering a material
update after the shader node tree changed in unrelated ways. Instead
the material has a flushing relation to the new `NTREE_OUTPUT` node now.
* The depsgraph no longer reports data block changes through to cycles
through `Depsgraph.updates` when only the node tree changed in ways
that do not affect the output.
Avoiding unnecessary updates seems to work well for geometry nodes and cycles.
The situation is a bit worse when there are drivers on the node tree, but that
could potentially be improved separately in the future.
Avoiding updates in eevee and the compositor is more tricky, but also less urgent.
* Eevee updates are triggered by calling `DRW_notify_view_update` in
`ED_render_view3d_update` indirectly from `DEG_editors_update`.
* Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`.
This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`.
Removing updates always has the risk of breaking some dependency that no
one was aware of. It's not unlikely that this will happen here as well. Adding
back missing updates should be quite a bit easier than getting rid of
unnecessary updates though.
Differential Revision: https://developer.blender.org/D13246
This commit adds a search menu when links are dragged above empty
space. When releasing the drag, a menu displays all compatible
sockets with the source link. The "main" sockets (usually the first)
are weighted above other sockets in the search, so they appear first
when you type the name of the node.
A few special operators for creating a reroute or a group input node
are also added to the search.
Translation is started after choosing a node so it can be placed
quickly, since users would likely adjust the position after anyway.
A small "+" is displayed next to the cursor to give a hint about this.
Further improvements are possible after this first iteration:
- Support custom node trees.
- Better drawing of items in the search menu.
- Potential tweaks to filtering of items, depending on user feedback.
Thanks to Juanfran Matheu for developing an initial patch.
Differential Revision: https://developer.blender.org/D8286
The const argument makes sense because these are the "source"
sockets, even though a const cast is necessary at one point.
The name "interface_socket" is an improvement over "stemp"
because the latter sounds like "temporary", or it confuses
the old socket template system with a node group's interface.
This node outputs the current scene time in seconds or in frames.
Use of this node eliminates the need to use drivers to control values
in the node tree that are driven by the scene time.
Frame is a float value to provide for subframe rendering for motion
blur.
Differential Revision: https://developer.blender.org/D13455
This node is a field input that outputs a separate index for each mesh island.
The indices are based on the order of the lowest-numbered vertex in each island.
Authoring help from @hooglyboogly
Differential Revision: https://developer.blender.org/D13504
Creates a new Edge Neighbors node which outputs a field
containing the number of faces connected to each edge.
Differential Revision: https://developer.blender.org/D13493
This adds a new Geometry to Instance node that turns every
connected input geometry into an instance. Those instances
can for example be used in the Instance on Points node.
Differential Revision: https://developer.blender.org/D13500
The `node_storage` functions to retrieve const and mutable structs
from a node are generated by a short macro that can be placed at the
top of each relevant file. I use this in D8286 to make code snippets
in the socket declarations much shorter, but I thought it would be
good to use it consistently everywhere else too.
The functions are also useful to avoid copy and paste errors,
like the one corrected in the cylinder node in this commit.
Differential Revision: https://developer.blender.org/D13491
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
Creates 4 new nodes which provide topology information
for the mesh. Values are interpolated from the primary
domain in each case using basic attribute interpolation.
Vertex Neighbors
- Vertex Count
- Face Count
Face Neighbors
- Vertex Count
- Neighboring Face Count
Edge Vertices
- Vertex Index 1
- Vertex Index 2
- Position 1
- Position 2
Face Area
- Face Area
Differential Revision: https://developer.blender.org/D13343
As a followup to 338c1060d5, apply the same change to the node
drawing callback. This helps to simplify code when the complexity
of a callback isn't necessary right now.
Currently there are a few callbacks on `bNodeType` that do the same
thing for every node type except reroutes and frame nodes. Having a
callback for basic things complicates code and makes it harder to
understand, and reroutes and frames are special cases in larger way.
Arguably frame nodes shouldn't even be drawn like regular nodes,
given that it adds a case of O(N^2) looping through all nodes.
"Unrolling" the callbacks makes it easier to see what's happening,
and therefore easier to optimize.
Differential Revision: https://developer.blender.org/D13463
This helps to tell when a pointer is expected to be null, and avoid
overly verbose code when dereferencing. This commit also includes
a few other cleanups in this area:
- Use const in a few places
- Use `float2` instead of `float[2]`
- Remove some unnecessary includes and old code
The change can be continued further in the future.
This node calculates the dual of the input mesh. This means that faces
get replaced with vertices and vertices with faces. In principle this
only makes sense when the mesh in manifold, but there is an option to
keep the (non-manifold) boundaries of the mesh intact.
Attributes are propagated:
- Point domain goes to face domain and vice versa
- Edge domain and Face corner domain gets mapped to itself
Because of the duality, when the mesh is manifold, the attributes get
mapped to themselves when applying the node twice.
Thanks to Leul Mulugeta (@Leul) for help with the
ascii diagrams in the code comments.
Note that this does not work well with some non-manifold geometry,
like an edge connected to more than 2 faces, or a vertex connected to
only two faces, while not being in the boundary. This is because there
is no good way to define the dual at some of those points. This type
of non-manifold vertices are just removed for this reason.
Differential Revision: https://developer.blender.org/D12949
Replace compare floats node with a generalized compare node. The node
allows for the comparison of float, int, string, color, and vector.
The datatypes support the following operators:
Float, Int: <, >, <=, >=, ==, !=
String: ==, !=
Color: ==, !=, lighter, darker
(using rgb_to_grayscale value as the brightness value)
Vector Supports 5 comparison modes for: ==, !=, <, >, <=, >=
Average: The average of the components of the vectors are compared.
Dot Product: The dot product of the vectors are compared.
Direction: The angle between the vectors is compared to an angle
Element-wise: The individual components of the vectors are compared.
Length: The lengths of the vectors are compared.
Differential Revision: https://developer.blender.org/D13228
- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
The Domain Size node has a single geometry input and a selection for
the component type. Based on the component chosen, outputs containing
single values for the related domains are shown.
Mesh:
- Point Count
- Edge Count
- Face Count
- Face Corner Count
Curve:
- Point Count
- Spline Count
Point Cloud:
- Point Count
Instances:
- Instance Count
Differential Revision: https://developer.blender.org/D13365
Previously, node types had a callback that creates internal links. Pretty
much all nodes used the same callback though. The exceptions are the
reroute node (which probably shouldn't be mutable anyway) and some
input/output nodes that are not mutable.
Removing the callback helps with D13246, because it makes it easier
to reason about which internal links are created and when they change.
In the future, the internal links should be part of the node declaration.
This cleans up part of the code that still set the flag manually. Also, this
change helps with D13246 because it makes it easier to tag the node
tree as changed when the availability of a socket changed.
