This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
This can simplify iterating through all of the indices in the vector,
which is fairly common, since one of the benefits of the data structure
is that all values are contiguous.
Part of a5cb7c1e62 is reverted since it
created unknown pragma warning on windows.
Use a trick to do self-assigning.
Reviewed by Jacques Lucke in chat.
Fix assignment warning
source/blender/blenlib/tests/BLI_any_test.cc:56:5: warning: explicitly
assigning value of variable of type 'blender::Any<void, 8, 8>'
to itself [-Wself-assign-overloaded]
c = c;
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13835
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
This is an update to the correct OCIO role.
It changes `SceneReference` to `scene_linear`
See https://opencolorio.readthedocs.io/en/latest/guides/authoring/overview.html#config-roles
> - reference - the color space against which the other color spaces are defined
>NOTE: The reference role has sometimes been misinterpreted as being the space in which “reference art” is stored in.
>
> - scene_linear - the scene-referred linear-to-light color space, often the same as the reference space
The current OCIO UX working group doc says:
>reference: This role has had multiple interpreted meanings over the years and is a common point of confusion. It is kept in OCIO for backwards compatibility, but the recommendation is that it is not used by apps.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11398
It it rather an old experiment now which didn't pay off.
The initial idea was to have main and jobs threads on fast
nodes of TR2 processors. This didn't really work reliably
because in Blender we need to be able to create nested
threads without their affinity set. This is not how some of
OS are creating nested threads, and we don't always have
access to child threads to reset their affinity.
So overall complexity of the initial idea implementation
became too much compared to the performance gain.
Assert that only the file name component is passed in
since special handling for UDIM should only be applied to the file name.
Also remove an unnecessary NULL check on the filename argument.
Function `blend_color_softlight_float` used math different to compositor and
produced result that had abrupt value changes.
Use math based on modified screen blend mode as compositor does.
This implements the design detailed in T92696 to support virtual
filenames for UDIM textures. Currently, the following 2 substitution
tokens are supported:
| Token | Meaning |
| ----- | ---- |
| <UDIM> | 1001 + u-tile + v-tile * 10 |
| <UVTILE> | Equivalent to u<u-tile + 1>_v<v-tile + 1> |
Example for u-tile of 3 and v-tile of 1:
filename.<UDIM>_ver0023.png --> filename.1014_ver0023.png
filename.<UVTILE>_ver0023.png --> filename.u4_v2_ver0023.png
For image loading, the existing workflow is unchanged. A user can select
one or more image files, belonging to one or more UDIM tile sets, and
have Blender load them all as it does today. Now the <UVTILE> format is
"guessed" just as the <UDIM> format was guessed before.
If guessing fails, the user can simply go into the Image Editor and type
the proper substitution in the filename. Once typing is complete,
Blender will reload the files and correctly fill the tiles. This
workflow is new as attempting to fix the guessing in current versions
did not really work, and the user was often stuck with a confusing
situation.
For image saving, the existing workflow is changed slightly. Currently,
when saving, a user has to be sure to type the filename of the first
tile (e.g. filename.1001.png) to save the entire UDIM set. The number
could differ if they start at a different tile etc. This is confusing.
Now, the user should type a filename containing the appropriate
substitution token. By default Blender will fill in a default name using
the <UDIM> token but the user is free to save out images using <UVTILE>
if they wish.
Differential Revision: https://developer.blender.org/D13057
This function node creates a running total of a given Vector, Float, or
Int field.
Inputs:
- Value: The field to be accumulated
- Group Index: The values of this input are used to aggregate the input
into separate 'bins', creating multiple accumulations.
Outputs:
- Leading and Trailing: Returns the running totals starting
at either the first value of each accumulations or 0 respectively.
- Total: Returns the total accumulation at all positions of the field.
There's currently plenty of duplicate work happening when multiple outputs
are used that could be optimized by a future refactor to field inputs.
Differential Revision: https://developer.blender.org/D12743
This adds `blender::is_same_any_v` which is the almost the same as
`std::is_same_v`. The difference is that it allows for checking multiple
types at the same time.
Differential Revision: https://developer.blender.org/D13673
This replaces the single-threaded calculation of mesh min and max
positions with a `parallel_reduce` loop. Since the bounding box
of a mesh is retrieved quite often (at the end of each evaluation,
currently 2(?!) times when leaving edit mode, etc.), this makes for a
quite noticeable speedup actually.
On my Ryzen 3700x and a 4.2 million vertex mesh, I observed
a 4.4x performance increase, from 14 ms to 4.4 ms.
I added some methods to `float3` so they would be inlined, but
they're also a nice addition, since they're used often anyway.
Differential Revision: https://developer.blender.org/D13572
The cast to size_t leads to a build issue on 32
bit archs. cursor_delim_type_utf8 expects an int
so an additional cast to size_t is not required.
Reported by user frispete on devtalk.
On Windows, encode file paths as UTF-16 before trying to open the file
for reading/writing.
This introduces a new class `blender::fstream`, which wraps
`std::fstream` and provides this UTF-16 encoding. This class should also
be used in other areas, like the Alembic importer/exporter.
Manifest Task: T93960
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13633
The RNA setter now ensures that driver variables are uniquely named
(within the scope of the driver).
Versioning code has been added to ensure this uniqueness. The last
variable with the non-unique name retains the original name; this
ensures that the driver will still evaluate to the same value as before
this fix.
This also introduces a new blenlib function `BLI_listbase_from_link()`,
which can be used to find the entire list from any item within the list.
Manifest Task: T94116
Reviewed By: mont29, JacquesLucke
Maniphest Tasks: T94116
Differential Revision: https://developer.blender.org/D13594
Using the `MEM_*` API from C++ code was a bit annoying:
* When converting C to C++ code, one often has to add a type cast on
returned `void *`. That leads to having the same type name three times
in the same line. This patch reduces the amount to two and removes the
`sizeof(...)` from the line.
* The existing alternative of using `OBJECT_GUARDED_NEW` looks a out
of place compared to other allocation methods. Sometimes
`MEM_CXX_CLASS_ALLOC_FUNCS` can be used when structs are defined
in C++ code. It doesn't look great but it's definitely better. The downside
is that it makes the name of the allocation less useful. That's because
the same name is used for all allocations of a type, independend of
where it is allocated.
This patch introduces three new functions: `MEM_new`, `MEM_cnew` and
`MEM_delete`. These cover the majority of use cases (array allocation is
not covered).
The `OBJECT_GUARDED_*` macros are removed because they are not
needed anymore.
Differential Revision: https://developer.blender.org/D13502
Saving with only a filename (from Python) wasn't being prevented,
while it would successfully write the file to the working-directory,
path remapping and setting relative paths wouldn't work afterwards
as `Main.filepath` would have no directory component.
Disallow this since it's a corner case which only ever occurs
when path names without any directories are used from Python,
the overhead of expanding the working-directory for all data saving
operations isn't worthwhile.
The following changes have been made:
- bpy.ops.wm.save_mainfile() without a filepath argument
fails & reports and error when the file hasn't been saved.
Previously it would write to "untitled.blend" and set the
`G.main->filepath` to this as well.
- bpy.ops.wm.save_mainfile(filepath="untitled.blend")
fails & reports and error as the filename has no directory component.
- `BLI_path_is_abs_from_cwd` was added to check if the path would
attempt to expand to the CWD.
