Own fault in rBb154aa8c060a60d to fix T42447... Reverted that commit, and added
kind of not-so-nice hack instead.
Note root of the issue comes from the special case we are doing here re 'Local'
space of parent-less objects. In that case, local space should be the same as
world one, but instead we apply the object rotation to it... This is inconsistent
with all other cases and could very well lead to other issues as T42447, but afraid
fixing that properly would be rather hairy - not to mention it would likely break
all existing riggings etc. :(
Should be safe for a 2.73a, shall we need it.
Not much to add, modifier uses same code as operator basically, only key difference
is that modifier will never create data layers itself, you have to use dedicated operator
for that.
This add code needed to map a CD data layout from source mesh towards destination one,
and code needed to actually transfer data, using BKE's mesh remap generated data.
This allows to transfer most CD layers (vgroups, vcols, uvs...) as well as fake, boolean ones
(like smooth/sharp edges/faces, etc.). Some types are not yet transferable, mainly
shape keys, this is known TODO.
Data transfer can also use some advanced mixing in some cases (mostly, vgroups and vcols).
Notes:
* New transfer operators transfer data from active object towards selected ones.
* Modifier will be committed separately.
* Old weight transfer code (for vgroups) is kept for now, mostly because it is the only
usable one in weightpaint mode (it transfers from selected object to active one,
this is not sensible in Object mode, but needed in WeightPaint one). This will be addressed soon.
Again, heavily reviewed and enhanced by Campbell, thanks!
This is the (big!) core of mesh transfer data, it defines a set of structures
to represent a mapping of mesh elements (verts, edges, polys of loops) between
two arbitrary meshes, and code to compute such mappings.
No similarity is required between source and destination meshes (though results
when using complete different meshes are rather unlikely to be useful!).
This code is not bound to data transfer, it is defined to be as generic as possible,
and easy to reuse or extend as needs arise.
Several methods of mapping generation are defined for each element type,
we probably will have to adjust that in future (remove useless ones, add
new ones...).
For loops, you can also define islands (for UVs e.g.) so that loops of a same
destination polygon do not 'spread' across several source islands.
Heavily reviewed and enhanced by Campbell, thanks a lot!
You can now use lower-level '_ex' versions of bvh creators to only use part of
the mesh's elements in the BVH, and/or create bvh from non-DM sources.
Needed for transfer data.
Note edges extend version of bvh creator is not added here, not needed so far.
Propper fix reverting most of rB60e70c0c6014e5, which was only partial specific fix.
This code uses generic `BKE_id_lib_local_paths()` func to handle all possible paths.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D977
Simply have to rebase onto main filepath when copying, if source datablock is lib and path is relative.
Afaict, only affected Image and Text datablocks. MovieClip would also be a candidate, but has
no copy implemented currently.
This changes BKE's fitting code to use `BKE_camera_params_compute_viewplane` instead of
`BKE_camera_view_frame`. This allows that code to work with orthographic projection too.
Also, two funcs were added to rna's Object, to resp. get the projection matrix of that
object (mostly useful for cameras and lamps objects), and return position this object
should be to see all (to fit) a given set of points.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D961
The issue was originall caused by 2e8ba17 by removing necessery call
GPU_enable_material(). It was probably removed because in some cases
material was enabled after calling setDrawOptions.
That wasn't always a case for edit mode.
This is absolutely to be included to 2.73
curves.
Issue here is that brush curve could return negative values. This would
result in overflow of mask values. Those were not visible during real
time preview because result would be clamped.
We had two functions in the code, one of which allowed negatives but I
don't think that we really want that, users have no control over the
negative values at all anyway.
Thanks to the reporter, Leon Cheung for figuring out the issue :)
The getter of this matrix (actually, `BKE_object_matrix_local_get()`) was only correct
in case of pure-object parenting, bone parenting and such did not gave valid results.
Also cleaned up a bit setter code, was using as temp storage ob->obmat itself,
which is supposed to be a world matrix!
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D958
This commit includes a few things:
* It moves the Rake and Random flags from the brush to the MTex.
* The first change allows mask textures to have independent rake
support.
* Random rotation now has an angle value that controls the width of the
effect from the rake or default angle
* Rake and Random are now supported together.
This commit contains:
- Subversion bump to 2.73
- Release cycle is set to "rc"
- Submodules are pointed to appropriate tag now
(addons contrib just points to the latest contrib repo)
- New shiny splash screen!
deletion of baked caches.
This happens when objects use file names with matching prefixes:
"CubeX" -> not baked
"CubeXYZ" -> baked
The first objects cache should be discarded up to the current frame on
file load, but the second should be left intact. But because the cache
file names for both use the same prefix as well (based on hex name
representation) they both match the "CubeX" name and get discarded.
Adding the underscore terminator solves this issue, because it is never
part of the hex file name string.
WARNING: this solution does not work with custom names for point caches.
This feature is pretty much broken, users have to ensure their names
are unique themselves. Due to the possibility of underscores in names
and the ambiguity of point cache suffixes there is no reliable way to
encode filenames in that case.
There was some stupidness in the way how tracks are synchronized from the job
to actual DNA data leading to all sort of weird and wonderful failures again.
Writing to the tracks was already inside the lock section, but
reading was not. This could have lead to race condition leading
to all sorts of weird and wonderful artifacts.
This hack should not be needed here, quoting Sergey, the actual issue comes from BKE_object_handle_update_ex,
which is calling BKE_object_where_is_calc_ex when it shouldn't.
Propper fix is depsgraph refactor topic, though.
Allocating the iterator from a BLI_memarena wasn't threadsafe.
Change the API to use stack memory for iterators.
Thanks to @mont29 for finding exact cause of the bug.
It turns out that several important modelling addons depend on the assumption
that Grease Pencil data gets created on the active object instead of on scene
level. This commit adds a toggle for setting whether new Grease Pencil data
is created on scene or object level.
These work as follows:
* "Scene" = The behaviour originally introduced as part of the GPencil_EditStrokes
changes. New strokes are added to the scene instead of the active object, making
it easier to manage things when working with Grease Pencil in general.
* "Object" = The previous behaviour (from 2.50 to 2.72), where new strokes are added
to the active object. This is now being reintroduced to soften the transition
for addons out there which have been doing this in a lazy/lax way so far.
Now, what may be slightly confusing are the "fallback" measures in place:
* "Scene" - To ensure that loading old files goes ok without needing a version patch,
if the active object has GPencil data, that will be used in place of the scene's
own GPencil data.
* "Object" - If there was no active object at the time of creating strokes
(for instance, if you delete the active object immediately before drawing),
GPencil data gets attached to the current scene instead.
Since some tweaks may still be needed here, I've decided to bump the subversion
number so that we have a reference point when doing version patches.
