Change the sequence of characters shown on the 'Color Grid' generated image.
Differential Revision: https://developer.blender.org/D8603
Reviewed by Hans Goudey
This reverts commit 2ddecfffc3.
The correct fix is to compile with -fno-strict-aliasing on
release/relwithdebinfo builds also.
See the last commit/ {D9372}.
Maniphest Task T81077
We already had the ability to bake fcurves but no way to convert the
baked result back without using python. This patch adds and operator
that is available now next to the bake operator in the drop down menu,
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6379
Previously, only predefined and limited set of intrinsics combinations
could have been refined. This was caused by a bundle adjustment library
used in the early days of the solver.
Now it is possible to fully customize which intrinsics are to be refined
during camera solving. Internally solver supports per-parameter settings
but in the interface they are grouped as following:
* Focal length
* Optical center
* Radial distortion coefficients (which includes k1, k2, k3, k4)
* Tangential distortion coefficients (which includes p1, p2)
Differential Revision: https://developer.blender.org/D9294
This function from 2017 came with a comment: "TODO Nuke this once its
only user has been correctly converted to use generic IDmanagement"
Since it is unused after rB91462fbb31ba, now is time to remove it.
Differential Revision: https://developer.blender.org/D9368
The logic of `BKE_sculpt_update_object_for_edit` was not correct. such
low-level functions should typically never preform depsgraph evaluation
themselves, they should be able to rely on getting a fully evaluated
depsgraph and just get needed data from there.
Supporting that required fixing other broken code higher in the
callstack, namely:
* `ED_object_sculptmode_enter_ex` was freeing evaluated data, for no
valid reason it would seem.
* `sculpt_undosys_step_decode` was ensuring an evaluated depsgraph
**before** calling `ED_object_mode_generic_exit`, which would
invalidate a lot of evaluated data.
Note that it is fairly difficult to track down all code paths leading to
`BKE_sculpt_update_object_for_edit`, so there may be still cases where
this gets called with improperly evaluated depsgraph.
Reviewed By: sergey
Maniphest Tasks: T81854
Differential Revision: https://developer.blender.org/D9270
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
This patch improves the single core performance of the lattice deform.
1. Prefetching deform vert during initialization. This data is constant for
each innerloop. This reduces the complexity of the inner loop what makes
more CPU resources free for other optimizations.
2. Prefetching the Lattice instance. It was constant. Although performance
wise this isn't noticeable it is always good to free some space in the
branch prediction tables.
3. Remove branching in all loops by not exiting when the effect of the loop
isn't there. The checks in the inner loops detected if this loop didn't
have any effect on the final result and then continue to the next loop.
This made the branch prediction unpredictable and a lot of mis
predictions were done. For smaller inner loops it is always better
to remove unpredictable if statements by using branchless code patterns.
4. Use SSE2 instruction when available.
This gives 50% performance increase measured on a
Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz with GCC 9.3.
Also check other compilers.
Before:
```
performance_no_dvert_10000 (4 ms)
performance_no_dvert_100000 (30 ms)
performance_no_dvert_1000000 (268 ms)
performance_no_dvert_10000000 (2637 ms)
```
After:
```
performance_no_dvert_10000 (3 ms)
performance_no_dvert_100000 (21 ms)
performance_no_dvert_1000000 (180 ms)
performance_no_dvert_10000000 (1756 ms)
```
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D9087
This looks like a optimizer bug where it makes wrong assumptions.
The code inside lib_id_delete:264 on rBafd13710b897cc1c11b
`for (id = last_remapped_id->next; id; id = id->next) {..}`
is not executed in release/relwithdebinfo builds.
This can be "fixed" by several ways:
- Adding a line that prints the `last_remapped_id->name` right before
the said for-loop starts.
- Turning off optimization for the whole function `id_delete`:
`#pragma clang optimize off/on` Ray Molenkamp
- Marking `last_remapped_id` volatile. Julian Eisel
- Marking `tagged_deleted_ids` volatile. But it adds a warning when
calling `BLI_addtail`: discards volatile qualifier. Discovered by
accident.
Fix T81077
Reviewed By: mont29
Maniphest Tasks: T81077
Differential Revision: https://developer.blender.org/D9315
This commit uses continue in loops and returning early to reduce
indentation in long functions, only where this results in a significant
improvement. Also includes a few LISTBASE_FOREACH macros.
The solo mode was skipping the layer creation data and the loop of masks expect to have all layers in the array or the loop crash.
The solution is just create the layer array data for the layer, but don't draw any stroke.
From the backtrace it looks like in some cases file save (which triggers
a general override updates) is done before other code has a chance to
re-generate pose data, leading to rna accessing freed memory.
I was never able to reproduce that here, so this is a tentative fix in
master, if it proves to be working for the studio it will be
cherry-picked into 2.91 release branch later.
It was rather a huge chunk of code, which started to become
more harder to maintain with the transition to OpenSubdiv based
implementation. Because of this transition, the compatibility was
also rather on a poor side.
Remove compatibility support for pre-2.50.9 multires.
Ref T77107
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D9238
Selecting an F-Curve handle caused an assertion as well as treating
the key-frame as inactive.
Allow active the keyframe to be active when it's handle is selected,
as is done with bezier curves.
These changes should result in more readable and undestandable code,
especially where while loops were use instead of for loops. They are
not comprehensive, and I skipped wherever the change was not obvious.
The new preset I made for 2.91 is way more controllable with lower
strength values and does not have the accumulate bug, but until the
brush management is in place to ship multiple versions of the brush,
probably most people expect something closer to the old version to be
the default.
Reviewed By: sergey
Maniphest Tasks: T81901
Differential Revision: https://developer.blender.org/D9289
