nothing
Caused by rB6faa765af895.
Since above commit, we have to use paint.mask_box_gesture instead now.
Maniphest Tasks: T81926
Differential Revision: https://developer.blender.org/D9300
Line gesture use always the right side of the line as active (the area
of the mesh that is going to be modified) by default.
This adds the ability to change the active side when the line gesture is
active by pressing the F key.
This allows more freedom to position the line after starting the
gestures, as it won't be required to cancel the operation or undo if the
line was used in the wrong direction.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9301
This adds support for snapping for line gesture tool. It is implemented
in the modal keymap as Snap, which is a toggle (similar to how snapping
in the transform operator works).
Right now it snaps the angle of the line to 15 degree increments, which
is defined in code. This should be easy to expose in the UI in the future
if we need to.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9115
This patch adds a modal key to move the selection box/lasso/line while
drawing it. It also sets "repeat": False on the animation playback key
to prevent accidental playback if the spacebar is released after the
mouse button.
Reviewed By: #user_interface, pablovazquez, Severin
Differential Revision: https://developer.blender.org/D9227
The `outliner.item_rename` operator needs to decide if it should rename the
active or the hovered item. Previously it checked if the event is a press
event, which is a hacky way of doing this and limit how the operator can be
used in the keymap.
Now use a operator option to let this be controlled on the keymap level.
Doesn't change any default behavior.
With all the work on DNA defaults for 2.91, it's nice to expose this
convenient operator. This was already hardcoded in the UI code to the
backspace key, adding it to the keymap instead will make the shortcut
automatically show in the button right click menu.
Differential Revision: https://developer.blender.org/D9219
Both the default theme and Blender Light have been updated.
Blender Light also includes automatically generated colors based on the
default theme that were not set previously.
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
This fixes and reverts commit c7287ffaec
Due to hardcodded keys, the modifier for auto contrain plane did not
work with custom keymaps and was in conflict with other keyitems.
Its usability is also confusing since it cannot be used without
`MOD_PRECISION`
But instead of removing it, it is better to make this modifier compatible
with custom keymaps and keep the conflict.
Caused by still having 'texture_opacity' in the preests and the preset
operator (but this was removed in the 2.83 rewrite).
Maniphest Tasks: T81081
Differential Revision: https://developer.blender.org/D8990
This object operator exits and frees the edit data of the
current object and enters the same mode in another one in a single step,
without going through object mode or keeping multiple edit object data
active. It is assigned to the D key.
This solves all conflicts that the right/click select keymap and the
emulate 3 button mouse produces for this operation and it is independent
of the state of Lock object modes.
Also, as the SculptSession is freed, when using Multires objects go
back to their preview resolution level, so it is possible to work on
high vertex count scenes without slowing down the viewport and other
performance problems.
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7510
Was missing a dedicated entry for LMB select, this is to be consistent
with how it is done for meshes.
Maniphest Tasks: T80905
Differential Revision: https://developer.blender.org/D8935
This commit makes grid theming more consistent and capable by adding
some new theme colors related to grid rendering.
- Add grid theme color for node editor. `UI_view2d_multi_grid_draw`
is called with TH_GRID instead of a shaded `TH_BACK`.
Also color-blend `TH_NODE_GROUP`.
- Make the movie clip editor's clip preview grid respect grid theme
color (`ED_region_grid_draw` uses color-blended `TH_GRID`).
- Add versioning code to allow fixing existing themes (the resulting
themes should visually look the same as before)
These changes did cause some inconsistencies in the movie clip editor,
even after adjusting the themes accordingly:
1. The alpha slider of the grid color affects the background and not
the grid lines themselves.
2. The grids used by graph and dopesheet mode could already be themed
in the past. Now that the clip preview's grid can also be themed,
two different modes share the same theme color.
Differential Revision: https://developer.blender.org/D8699
`ctrl-F` to start the search is obviously necessary, but the clear
operator, `alt-F` requires some of explanation. First, it maps nicely
to the paradigm of "key to set, alt-key to clear," which makes it
unobtrusive. Second, it can be a quicker way to clear the search than
moving the mouse to the top. Finally, in the future, it could a reset
the panels to their expansion before the search started.
Differential Revision: https://developer.blender.org/D8857
We will use a highlight on panel headers to convey that they have
a search match, so this commit initializes the theme color for the
properties editor.
Differential Revision: https://developer.blender.org/D8854
This commit also changes the U shortcut to open the unwrap menu instead
of the Unwrap operator. The unwrap operator can now be accessed by
pressing U twice.
Note, these operators use the 3D Viewports selection and not the UV
Editor selection. In the future the operators should unwrap based on the
selection within that editor.
Fixes T80600
Differential Revision: https://developer.blender.org/D8834
This implements Box Trim as a boolean based trimming too gesture in sculpt
mode. This is the intended way to remove parts of the sculpt instead of
using box mask and mask slice. It also creates new face sets for the new
faces created after the boolean operation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8766
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
Keymaps must be customized by the user.
But this is not the case for hardcoded keymaps.
Also the repetition of hardcoded and user-defined keyitems may induce
the user to think they have made a mistake or it is a bug.
Differential Revision: https://developer.blender.org/D6454
The outliner already uses the alternating row theme color as an
overlay for every other row. This uses the same color for the file
browser, instead of a hardcoded shading.
The file browser background color is slightly tweaked to match the
outliner, and the Blender Light theme is updated to use a lighter
background color like the outliner.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8717
`TH_UV_OTHERS` is a theme option that isn't hooked to anything since
blender 2.80. This patch will remove the option and related code.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8669
If the File Browser was used in regular editor mode (e.g. not through an
operation like File > Open), the operator that usually opens files and
directories wouldn't execute. We need to keep two operators for
double-click in the keymap so selecting and opening works in all cases.
Caused by c606044157.
Previously the way to use this operations was using the shortcut Ctrl +
W and Ctrl + Alt + W, which was not very discoverable and it was
limiting the amount of options that can be added to the operator.Now the
same functionality of the operator is available as a tool, which will
make easier to add other editing operations and options without adding
more entries to the keymap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8545
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
The file.execute() operator is the one that actually opened directories
and files, not file.select() with the "open" option, as it was assumed
when changing the keymap to double-click for opening. It only acts on
the current selection though, so we have to ensure the selection is set
on the first click.
Now, some touch-pads have a delay until they register a click event, so
the double-click would be registered instead, before the selection is
set. Always select on mouse-down now and remove the unnecessary select
operator call on double-click.
Box mask is not a selection, so it should not be part of the select
operator. This allows to add more sculpt mode specific functionality and
properties and to share more code with the lasso mask operator in a
later refactor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8456
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
Only the delete shortcut applies here, although the move up and down
operators can optionally be assigned in the keymap.
See rB1fa40c9f8a81 for more details and rB5d2005cbb54b for the
grease pencil modifier panel implementation, which is the same.
Some refactoring of the constraint delete operator was necessary,
including adding an invoke function.
Differential Revision: https://developer.blender.org/D8238
