Disable transform and mask display when there's no active clip.
It's not a matter of returning fallback dimensions if there's no
slip, it's also matter of making it so stabilization and distortion
routines are aware of clip == NULL which is really crappy.
Also almost all the operators are disabled in clip editor without
active clip already anyway.
Also tweaked header UI a bit to not display mask stuff when there's
no active clip,
Use Z axis for the edge direction for edges and vertex pairs.
Issue raised in T38592, now edge select and vert-pairs share logic
for calculating orientation and the active vertex determines direction.
Issue was in fact in strip update code when transforming, in case we move both left and right
handles the strip is handled twice in the loop, but it was always updated at the end of the
first loop only...
Issue partially caused by own errors (glicth in new BKE_boundbox_ray_hit_check() code causing segfault in volume snapping,
and we have to treat ortho and persp differently in case of face snapping, because in persp our ray_start might very well
already be *inside* the boundbox of the checked object), and partly due to the fact that ED_view3d_win_to_vector()
was returning wrong vector (negated one) for ortho views (see previous commit).
Also allowed me to fine another potential issue, hit.dist was no more initialized correctly - and I had forgotten to take into account Brecht's remark about normalize_v3() also returning the vector's previous length.
Issue is caused by start point of ray used to detect faces under the mouse is set rather far away in ortho 3dviews.
The loss of precision on the ray location induced by this can lead to face snapping failures.
Solution is to do the raycasting with a temp start point, much closer to the object we check, and add back
to the found distance the diff to the real start point once detection is done (as we need all hit distances
from all tested objects to be relative to a common point!).
Note this commit only addresses the "face snapping on mesh" case, other kind of snapping do not seem to suffer
from this issue.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D268
Changed curve active point from pointer to index. Allows curve active point to be saved to file and retained between modes for free. Also some small optimisations by removing pointer look up code.
- Made active point access functions into BKE API calls.
- Fixes operators where curve de-selection resulted in unsel-active point.
- Split curve delete into 2 functions
During drag the H key can be used to toggle the hide flag of the selected nodes.
This makes it easier to 'attach' nodes to available links in narrow places.
Because of the issue of how simplification works, there could
be more flags in on->recalc bitfield which are ignored by object
anyway.
Would save some update calls after simplificating the scene.
It was actually rather simple to make sure depsgraph is up to date
before calling BKE_object_handle_update() in the transform code by
just moving DAG_scene_relations_update() to the beginning of the
function.
Wouldn't expect any side effects for other cases since DAG is not
used bu the code between new location of the call and old one.
This is a regression since threaded dependency graph landed to master.
Root of the issue goes to the loads of graph preparation being done
even if there's nothing to be updated.
The idea of this change is to use ID type recalc bits to determine
whether there're objects to be updated. Generally speaking, we now
check object and object data datablocks with DAG_id_type_tagged()
and if there's no such IDs tagged we skip the whole task pool creation
and so,
The only difficult aspect was that in some circumstances it was possible
that there are tagged objects but nothing in ID recalc bit fields.
There were several different circumstances when it was possible:
* When one assigns object->recalc flag directly DAG flush didn't
set corresponding bits to ID recalc bits. Partially it is fixed
by making it so flush will set bitfield, but also for object
types there's no reason to assign recalc flag directly. Using
generic DAG_id_type_tag works almost the same fast as direct
assignment, ensures all the bitflags are set properly and for the
long run it seems it's what we would actually want to.
* DAG_on_visible_update() didn't set recalc bits at all.
* Some areas were checking for object->recalc != 0, however it is was
possible that object recalc flag contains PSYS_RECALC_CHILD which
was never cleaned from there.
No idea why would we need to assign such a flag when enabling
scene simplification, this is to be investigated separately.
* It is possible that scene_update_post and frame_update_post handlers
will modify objects. The issue is that DAG_ids_clear_recalc is called
just after callbacks, which leaves objects with recalc flags but no
corresponding bit in ID recalc bitfield. This leads to some kind of
regression when using ID type tag fields to check whether there objects
to be updated internally comparing threaded DAG with legacy one.
For now let's have a workaround which will preserve tag for ID_OB
if there're objects with OB_RECALC_ALL bits. This keeps behavior
unchanged comparing with 2.69 release.
When trying to scale bones in EditMode and the bones were drawn using envelope display mode,
this resulted in the joint radii (i.e. the inner part of envelopes) being adjusted instead.
It turns out that this was due to an old hack that was put in place back in 2.4x (see the
tracker logs for full details of the problem here).
This commit introduces the following fixes:
1) Removed the old hack. Scaling (S) works normally now.
2) Ctrl-Alt-S (i.e. "Scale Envelopes/BBones") is as-is.
That is, it is used to adjust the size falloff-region around a bone
(i.e. the "dist" property)
3) Added Alt-S hotkey in EditMode for armatures for adjusting the radii of bones.
This change just means that the "TFM_BONE_ENVELOPE" mode is now able to be
accessed from the UI as a tool on its own right (instead of being accessible
via the old undocumented hack). This tool adjusts the radii of the bone joints,
which define the actual full-influence region of the envelopes.
Summary:
Made objects update happening from multiple threads. It is a task-based
scheduling system which uses current dependency graph for spawning new
tasks. This means threading happens on object level, but the system is
flexible enough for higher granularity.
Technical details:
- Uses task scheduler which was recently committed to trunk
(that one which Brecht ported from Cycles).
- Added two utility functions to dependency graph:
* DAG_threaded_update_begin, which is called to initialize threaded
objects update. It will also schedule root DAG node to the queue,
hence starting evaluation process.
Initialization will calculate how much parents are to be evaluation
before current DAG node can be scheduled. This value is used by task
threads for faster detecting which nodes might be scheduled.
* DAG_threaded_update_handle_node_updated which is called from task
thread function when node was fully handled.
This function decreases num_pending_parents of node children and
schedules children with zero valency.
As it might have become clear, task thread receives DAG nodes and
decides which callback to call for it.
Currently only BKE_object_handle_update is called for object nodes.
In the future it'll call node->callback() from Ali's new DAG.
- This required adding some workarounds to the render pipeline.
Mainly to stop using get_object_dm() from modifiers' apply callback.
Such a call was only a workaround for dependency graph glitch when
rendering scene with, say, boolean modifiers before displaying
this scene.
Such change moves workaround from one place to another, so overall
hackentropy remains the same.
- Added paradigm of EvaluaitonContext. Currently it's more like just a
more reliable replacement for G.is_rendering which fails in some
circumstances.
Future idea of this context is to also store all the local data needed
for objects evaluation such as local time, Copy-on-Write data and so.
There're two types of EvaluationContext:
* Context used for viewport updated and owned by Main. In the future
this context might be easily moved to Window or Screen to allo
per-window/per-screen local time.
* Context used by render engines to evaluate objects for render purposes.
Render engine is an owner of this context.
This context is passed to all object update routines.
Reviewers: brecht, campbellbarton
Reviewed By: brecht
CC: lukastoenne
Differential Revision: https://developer.blender.org/D94
Summary:
This completly changes the way modal numinput is handled. Now, edited expression is a string, which then gets unit- and py-evaluated to get a float value.
We gain many power and flexibility, but lose a few "shortcuts" like '-' to negate, or '/' to inverse (if they are really needed, we still can add them with modifiers, like e.g. ctrl-/ or so).
Features:
- units (cm, ", deg, etc.).
- basic operations from python/BKE_unit (+, *, **, etc.), and math constants and functions (pi, sin, etc.).
- you can navigate in edited value (left/right key, ctrl to move by block) and insert/delete chars, e.g. to fix a typo without having to rewrite everything.
- you can go to next/previous value with (ctrl-)TAB key.
- As before, hitting backspace after having deleted all leading chars will first reset the edited value to init state, and on second press, the whole "modal numinput" editing will be cancelled, going back to usual transform with mouse.
Notes:
- Did not touch to how values are shown in header when modal numinput is not enabled (would do that in another commit), so this is still quite inconsistent.
- Added back radian support in BKE_unit.
- Added arcminute/arcsecond to BKE_unit.
(those unit changes affect all angle UI controls, btw, so you can now enter radians or longitude/latitude values when in degrees units).
Related to T37600.
Reviewers: brecht, campbellbarton, carter2422
Reviewed By: brecht, campbellbarton, carter2422
Thanks everybody!
Differential Revision: http://developer.blender.org/D61
Currently we don't properly support snapping + axis-constraints, but
there are cases where its handy to project-snap for eg, and constraint
to an axis so re-enable this.
