This commit implements described in the #104573.
The goal is to fix the confusion of the submodule hashes change, which are not
ideal for any of the supported git-module configuration (they are either always
visible causing confusion, or silently staged and committed, also causing
confusion).
This commit replaces submodules with a checkout of addons and addons_contrib,
covered by the .gitignore, and locale and developer tools are moved to the
main repository.
This also changes the paths:
- /release/scripts are moved to the /scripts
- /source/tools are moved to the /tools
- /release/datafiles/locale is moved to /locale
This is done to avoid conflicts when using bisect, and also allow buildbot to
automatically "recover" wgen building older or newer branches/patches.
Running `make update` will initialize the local checkout to the changed
repository configuration.
Another aspect of the change is that the make update will support Github style
of remote organization (origin remote pointing to thy fork, upstream remote
pointing to the upstream blender/blender.git).
Pull Request #104755
After rBdb87e2a638f9, two contexts were missing:
- VirtualReality, to be used in an add-on
- Constraint, used in the constraints UI
The latter was actually used without being added, which caused errors.
It was reverted in rB31a640027982.
This reverts commit 19222627c6.
Something went wrong here, seems like this commit merged the main branch
into the release branch, which should never be done.
Currently Metal is more stable then the OpenGL backend on apple
devices. Also the Metal backend supports more features then the
OpenGL backend. For example the viewport compositor and rendering
of production files.
This has been validated with users and studios.
This patch will default to the Metal backend when starting
Blender 3.5 for the first time or when loading factory startup. It
is still possible to switch to OpenGL via the user preferences.
It will not automatically select the Metal backend when there is
already user preferences available for Blender 3.5.
No design or functional changes. Just rename the layers for the last
two icons that were added so that they follow the naming pattern.
Also, update the layer order for another icon (was not alphabetic).
Pull Request #104954
Note that the node group has its sockets names translated, while the
built-in nodes don't. So we need to use data_ for the built-in nodes
names, and the sockets of the created node groups.
Pull Request #104889
This reverts commit 68181c2560.
I merged 3.6 into 3.5 by mistake. Basically I had a PR against main,
then changed it in the last minute to be against 3.5 via the
web-interface unaware that I shouldn't do it without updating the
patch.
Original Pull Request: #104889
Note that the node group has its sockets names
translated, while the built-in nodes don't.
So we need to use data_ for the built-in nodes names,
and the sockets of the created node groups.
Pull Request #104889
When animating it is often useful to frame the Graph Editor/Dope Sheet to whatever frames are in a given channel.
This patch adds the option to frame on selected channels OR frame on whatever channel is under the cursor.
If a preview range is set it will only focus on keys in that range.
Supports FCurve and keyframe data
Frame to selected is called with
* Right click in the channel section -> Frame Selected Channels
* or in Channel → Frame Selected Channels
* or hitting . on the numpad
Frame to channel under cursor is done with
ALT + Middle Mouse Button
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104523
Finding the documentation for nodes can be time consuming.
By adding the online manual to the right click context menu in the node
editor the user gets easier access to the documentation.
Can also be used by custom nodes add-ons by registering a manual-map.
Pull Request #104833
This adds the "Select More/Less" operators for Curves. Both operators use the `select_adjacent` function to (de)select adjacent points.
Pull Request #104626
After the removal of the "normal" attribute providers, we no longer
use the concept of read-only attributes. Removing this status simplifies
code, clarifies the design, and removes potentially buggy corner cases.
Pull Request #104795
* Fix#92539: Hard to read the breadcrumbs.
* Fix View Item active, hover, and text color (e.g. count numbers in the
Spreadsheet were almost unreadable).
* Fix mismatching node type colors with the default theme.
Blender Light is meant to be simply a brighter version of the default,
so screenshots and tutorials can be followed with both themes.
* Use the same outline color for widgets, so they match when aligned in a row.
* Make panels standout (not fully transparent), like in the default theme.
The Preferences for asset libraries are becoming more than a simple name
+ path. E.g. there is now an Import Method options, and we previously
also considered a Relative Paths option (which we may still want to
add). The previous UI, while consistent with the Auto Run Python Scripts
UI isn't well suited for less than trivial cases. Using UI lists makes
the UI more scalable and follows usual list UI patterns more. There is
also more space for the path button now.
Part of #104686.
The default import method for an asset library can now be determined in
the Preferences. The Asset Browser has a new "Follow Preferences" option
for the importing. The essentials asset library still only uses "Append
(Reuse Data)".
This is part of #104686, which aims at improving the import method
selection, especially for the introduction of the new essentials library
(which doesn't support certain import methods). Further changes are
coming to improve the UI, see #104686.
Pull Request: #104688
The quick fur operator now uses the new hair system. It adds a new
curves object for every selected mesh, and adds geometry nodes
modifiers from the essentials assets that generate curves. A few
settings are exposed in the redo panel, including an option for whether
to apply the modifier to generate the initial curves so that there is
original editable data.
The point of the operator is to give people a sense of how to use the
node groups and to give a very fast way to build a basic setup for
further tweaking.
Pull Request #104764
Use the right hand side selection, as it fits the typical workflow
the best.
Arguably, the same would need to be done for the k-shortcut, but
that is another issue to be tackled. As well as making the selection
active.
Pull Request #104777
This implements the delete operator in curves edit mode. The behavior
is similar to the delete operator in the edit mode of legacy curves,
i.e. it's actually dissolving and doesn't split curves. This is also
the behavior that we generally want for the hair use case.
The operator is added to the `Curves` menu and can be accessed via
the keyboard using `X` or `Del`.
Pull Request #104765
This adds a new `Curve Falloff` popover to the comb brush tool settings.
The curve control allows changing the brush weight along the curve to
e.g. affect the tip more than the root. This is a relative way to get
something like stiffness for short hair.
This functionality could potentially be added to some other brushes,
but the comb brush is the most important one, so that is added first.
I did add the buttons add the buttons to choose a curve map preset.
However, I did not add the preset dropdown, because that just adds
some unnecessary complexity in the code now and is redundant.
Pull Request #104589
This patch adds a simple operator to set values of the active
attribute for the selected element. The aim is to give simple control
over attribute values in edit mode rather than to provide the fastest
workflow for most cases. Eventually this operator might be less
important compared to more advanced attribute editing tools, but for
now, exposing a little bit of functionality is low hanging fruit and
will help to see the possibilities.
The implementation mostly consists of boilerplate to register the
necessary property types for the operator and draw their UI.
Beyond that, we just loop over selected elements and set a value.
Pull Request #104426
As described in #104171, add an operator that creates a new node group
that contain the current node group and named attribute nodes to deal
with the outputs. This saves manual work when moving a high-level
modifier to the node editor for better procedural control.
Pull Request #104546
This adds a new overlay for curves sculpt mode that displays the curves that the
user currently edits. Those may be different from the evaluated/original curves
when procedural deformations or child curves are used.
The overlay can clash with the evaluated curves when they are exactly on top of
each other. There is not much we can do about that currently. The user will have
to decide whether the overlay should be shown or not on a case-by-case basis.
Pull Request #104467
Sculpt: Added vector displacement for the sculpting draw brush (area plane mapping only for now)
Vector displacement maps (VDM) provide a way to create complex displacements that can have overhangs in one brush dab.
This is unlike standard displacement with height maps that only displace in the normal direction.
Forms like ears, curled horns, etc can be created in one click if VMDs are used.
There is a checkbox on the draw brush in the texture settings "Vector Displacement" that enables/disables this feature.
Technical description: The RGB channels of a texture in a brush stroke are read and interpreted as individual vectors, that are used to offset vertices.
As of now, this is only working for the draw brush using the area plane mapping. Symmetry and radial symmetry are working.
A few things to consider when making VD-Maps:
* UVs need to stay intact for the bake mesh (e.g. voxel remeshing can't be used to create VD Meshes)
* When exporting a VD Map it should be in the file format OpenEXR (for positive and negative floating point values).
* Export resolution can be 512x512 or lower (EXR files can get very large, but VDM brushes don't need a high resolution)
And when using them:
* Inside Blender clamping needs to be unchecked on the texture
* The brush falloff should be set to constant (or nearly constant)
This patch was inspired by this [right-click-select proposal](https://blender.community/c/rightclickselect/WqWx/) Thanks for the post!
(Moved [this patch](https://archive.blender.org/developer/D17080) to here.)
Co-authored-by: Robin Hohnsbeen <robin@hohnsbeen.de>
Pull Request #104481
Matching the RNA id's to the search pattern is slow because
of the function `fnmatchcase`. This patch first checks the string
prefix without any special characters used by fnmatch,
if the `startswith` check fails, there is no need to check `fnmatchcase`.
Before the optimization, an online manual lookup took about 400ms
which is quite noticeable, with this patch applied it's under 10ms.
Ref !104581.
Currently the passepartout color is hardcoded to black. While a
sensible default for cinema, it may make less sense for other media,
whether video, print, web, etc. It greatly affects viewing conditions
of the image and should be user selectable, much like painting
programs allow.
Pull Request #104486
During hair grooming in curves sculpt mode, it is very useful when hair strands
are prevented from intersecting with the surface mesh. Unfortunately, it also
decreases performance significantly so we don't want it to be turned on all the time.
The surface collision is used by the Comb, Pinch and Puff brushes currently.
It can be turned on or off on a per-geometry basis.
The intersection prevention quality of this patch is not perfect yet. This can
be improved over time using a better solver. Overall, perfect collision detection
at the cost of bad performance is not necessary for interactive sculpting,
because the user can fix small mistakes very quickly. Nevertheless, the quality
can probably still be improved significantly without too big slow-downs depending
on the use case. This can be done separately from this patch.
Pull Request #104469
