This change shows the object or material name with the cursor when picking for a cryptomatte node.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D10705
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
Problem is, when a collection is excluded from the scene, none of its
objects are technically instantiated.
This should not happen when *creating* an override, but can be fairly
common during resync process.
For now, use a lesser precise check in resync case, only relying on
object usercount. This might lead to some objects being left without any
collection in some rare weird case, but this cannot really be avoided
currently.
Seems like one of the example files on the cryptomatte github is
malformed and blender crashes when loading that file. This change will
try to load as much as possible from the manifest so it can still be
used.
This has also been reported to cryptomatte project.
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
The issue was caused by a prediction algorithm detecting tracking the
wrong way. Solved by passing tracking direction explicitly, so that
prediction will always happen correctly regardless of the state of the
Tracks context.
This exposes the `crease` attribute, that is used by the Subdivide Smooth node.
It is also the first attribute on the edge domain. Domain interpolations for the
edge domain have not been implemented yet.
Ref T86397.
Differential Revision: https://developer.blender.org/D10660
Attempt to work around some full-corruption cases created at the studio.
Not clear how those were created, so not really fixing anything here,
just detecting and 'solving' as best as possible some high corruption of
local overrides.
This is good to have in general anyway, might help prevent further
corruption to happen too.
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
Previously all blend files included the path they were saved,
causing files distributed publicly to include users local paths.
This also included developers home directories for startup & userprefs
defaults & app-templates bundled with Blender.
Now recovery information is only written for auto-save & quit.blend
since this is the only time they're intended to be used.
I had done some experiments to see what Fast boolean did for material
mapping and thought it just used the same slot in the target as the
slot in the source. The truth is more complicated: if the target material
exists in any slot of the destination, we need to remap to whatever
slot has the matching material. I fixed Exact Boolean to do this.
Since the materials may be in the object, this means that BKE_mesh_boolean
had to get another argument, the remapping arrays.
I will note that the current behavior of Fast, and now Exact, is not ideal.
Ideally, if the source material does not exist in the target, a new material
slot should be created in the target and the source material copied there
(and incrementing the material's reference count). Maybe a future project,
but for now, I want the behavior of Exact to match that of Fast.
This is necessary to make float sockets display a value with the unit
system. `PROP_DISTANCE` will be used quite a lot by the mesh primitives
geometry nodes patch.
Differential Revision: https://developer.blender.org/D10711
This commit adds a `normal` attribute on the polygon domain. Since
normal data is derived data purely based off of the location of each
face's vertices, it is exposed as a read-only attribute. After
rB80f7f1070f17, this attribute can be interpolated to the other domains.
Since this attribute is a special case compared to the others, the
implementation subclasses `BuiltinAttributeProvider`. It's possible
there is a better way to abstract this. Something else might also
become apparent if we add similar read-only attributes.
See rB2966871a7a891bf36 for why this is preferred over the previous
implementation.
Differential Revision: https://developer.blender.org/D10677
After further thought, the implementation of the "normal" attribute
from D10541 is not the best approach to expose this data, mainly
because it blindly copied existing design rather than using the
best method in the context of the generalized attribute system.
In Blender, vertex normals are simply a cache of the average normals
from the surrounding / connected faces. Because we have automatic
interpolation between domains already, we don't need a special
`vertex_normal` attribute for this case, we can just let the
generalized interpolation do the hard work where necessary,
simplifying the set of built-in attributes to only include the
`normal` attribute from faces.
The fact that vertex normals are just a cache also raised another
issue, because the cache could be dirty, so mutex locks were
necessary to calculate normals. That isn't necessarily a problem,
but it's nice to avoid where possible.
Another downside of the current attribute naming is that after the
point distribute node there would be two normal attributes.
This commit reverts the `vertex_normal` attribute so that
it can be replaced by the implementation in D10677.
Differential Revision: https://developer.blender.org/D10676
The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
This is basically done by ignoring override operations from old override
affecting ID pointer properties, when the new (destination) one is not
NULL.
Fix T86501: New object added to overridden collection doesn't show up in linking file on Resync.
This is more of a work-around actually, since there is no real way to
fix the issue in a fully automated and consistent way, it is caused by
older blender files being saved with 'broken' overrides.
WARNING: This cannot ensure that some purposedly edited/overridden ID
pointer properties won't be lost in the process.
Code would end up freeing some of the newly created overrides, which
were assigned to the matching linked ID's `newid` pointer, accessed
again further down the code.
Note that this is not a normal expected situation, and it won't give a
proper resync result anyway, but it might happen in some complicated
corner cases, and also quite often when dealing with older .blend files.
In some cases (advanced, low-level), we also want to remap pointers like
`ID.newid` or `ID.orig_id`.
Only known case currently is `id_delete`, to avoid leaving potential access to freed memory. See next commit and T86501.
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
Keep the pointer location from the initial window-manager
between file load operations.
This is needed as the Python API may hold references to keymaps for e.g.
which are transferred to the newly loaded window manager,
without their `PointerRNA.owner_id` fields being updated.
Since there is only ever one window manager, keep the memory at the same location so the Python ID pointers stay valid.
Reviewed By: mont29
Ref D10690
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
`BKE_lib_override_library_main_resync` uses
`LIB_TAG_LIB_OVERRIDE_NEED_RESYNC` tags set by RNA override apply code,
and perform detection for the remaining cases (those were new overrides
need to be created for data that was not present before in the library).
And then it actually resync all needed local overrides.
Part of T83811 & D10649.
We can fairly easily detect some resync-needed cases when applying the
overrides operations on a Pointer RNA property.
This should cover all cases where an existing override's ID pointer is
changed in its linked data.
We still have to add code to detect when a not-yet-overridden linked ID
needs to become overridden (because its relations to other data-blocks
changed in a way that requires it).
Part of T83811 & D10649.
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Using EEVEE (as well as some other actions like saving the file or
tweaking mesh parameters) can cause a PBVH rebuild. The different sculpt
tools can store PBVH nodes or other related data in their caches, so
this data becomes invalid if the PBVH rebuilds during evaluation. This
ensures that the PBVH does not rebuild while the cache of Expand is
being used, like it already happens for brushes and filters.
Reviewed By: JacquesLucke
Maniphest Tasks: T86422
Differential Revision: https://developer.blender.org/D10675
This commit adds interpolation to and from attribute on the polygon
domain. Interpolation is done automatically when a node uses attributes
on two different domains. The following are the new interpolations and
corresponding simple test cases:
- **Point to Polygon**: Painting the shade smooth attribute in weight
paint mode
- **Polygon to Point**: Moving points along a normal based on the
material index
- **Polygon to Corner**: Scaling a UV map with the material index
before sampling a texture
{F9881516}
This is also necessary for an improved implementation of the `normal`
attribute.
Differential Revision: https://developer.blender.org/D10393
