From the various forum threads and the fact that a new addon has cropped up,
it appears that it is not that well known that this tool exists, and that it
can be used solve a very common problem that animators face. Namely:
When you've gone through blocking out your key poses and then realise
that you need to adjust parts of the rig which don't change much, this
tool solves the problem of needing to go through doing grunt-work to
fix all the other keyframes which now need to change as well.
So, this tool is now available in the following two places (in addition to
the existing Pose -> Propagate menu):
* Toolbar - The "Propagate" button will use the default mode (or the last
used mode for each subsequent invocation).
The arrow-button beside this will allow choosing between the different
modes. (NOTE: The UI team may have different thoughts on this, but,
let's give this a try for a while first, to see if this sort of thing works)
* Alt-P - In Pose Mode, this will now bring up a menu allowing you to choose
which mode is used. Since this sort of thing is something that does
get run several times in a row when you need it, having this hotkey
will make it a bit more convenient.
This commit adds a new mode for the Propagate Pose tool. With this new option,
the Propagate Pose will copy the current pose over to all selected keyframes
after the current frame.
For reference, some of the other/existing options are: to copy it to each subsequent
keyframe with the same value (WHILE_HELD - the default), to the next keyframe,
or to the last keyframe.
This works by using the distance in the x axis only (usually artists want to influence nearby
keyframes based on timing, not value). Tweaking handles is the same as tweaking
the central handle. It's a bit ambiguous if proportional editing is really meaningful
for handles but will leave that for artists to decide.
The "Layered" option for auto keyframing will create a new NLA strip if playback
reaches the end of the frame range and jumps back again. The idea is that instead
of overwriting the keyframes you've already made, it will make a new animation
layer. However, this does not work with the "Insert Available Only" option
(which can either be set in the User Prefs, or in the active keyingset), as that
option needs some existing FCurves to tell what it can insert keyframes into.
The "fix" here is to simply not show the offending button in situations where it
cannot be used!
There are two per-editor settings now, the Per-Strip setting (default)
and the Project setting.
The per strip setting basically uses the previous, per-strip options for
storing the proxies.
The project setting though will use a specified directory for -all-
proxies, or the blend file directory if no directory is given.
This reverts commit ec03ab021f.
Changing this since it looks like Mattieu does not really like the change.
Will be adding another way to tweak the directories
Transformed 'OrientationHelper' class into 'orientation_helper_factory' function,
which returns an OrientationHelper customized class with specified default axes.
This patch will fix the color management for the mist and global ambient color.
It will remove the old "Color Management" switch in the BGE "Render > Shading" panel and will use the "Display Device" setting in the "Scene > Color Management" panel instead.
Reviewers: moguri, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D154
mode.
Yes it will, because those modes stay active. So on user side, expose
depth of field option always (I don't see why not), but disable SSAO in
wireframe/bounding box mode. It is a known limitation that compositing
does not support antialiasing yet, but better give users some more
control.
This could be included in final release but it's not that serious
either.
This change introduces a new hysteresis parameter that it will be added
or subtracted to/from the LOD distance to avoid popping when a LOD
object moves close to the LOD transition continuously.
Then, we have the following:
- a new LOD Hysteresis setting per scene (default 10%) which is located
in Scene context --> Level of Detail panel. This scene parameter also
will active/deactive the scene hysteresis.
- and a new LOD Hysteresis setting per object (default 10%) which is
located in Object context --> Levels of Detail panel. The LOD hysteresis
setting per object (if active) will overwrite the hysteresis setting per
scene value.
For the new blends: the hysteresis setting per scene would be active by
default and the per object would be inactive by default.
For the old blends: both hysteresis settings (per scene and per object)
would be inactive by default. A quick way to take advantage of this
feature for old blends would be to activate the hysteresis parameter in
the scene context -> Level of Detail panel
Reviewers: campbellbarton, kupoman, moguri
Reviewed By: kupoman, moguri
Subscribers: nonamejuju, lordodin
Differential Revision: https://developer.blender.org/D957
A new checkbox "High quality" is provided in camera settings to enable
this. This creates a depth of field that is much closer to the rendered
result and even supports aperture blades in the effect, but it's more
expensive too. There are optimizations to do here since the technique is
very fill rate heavy.
People, be careful, this -can- lock up your screen if depth of field
blurring is too extreme.
Technical details:
This uses geometry shaders + instancing and is an adaptation of
techniques gathered from
http://bartwronski.com/2014/04/07/bokeh-depth-of-field-going-insane-http://advances.realtimerendering.com/s2011/SousaSchulzKazyan%20-
%20in%20Real-Time%20Rendering%20Course).ppt
TODOs:
* Support dithering to minimize banding.
* Optimize fill rate in geometry shader.
D1147 by @julien, with fixes/improvements
Duplicate bones where needed, otherwise use existing.
Keeps parent relations intact, can operate on parts of an armature.
I noticed our version code and subversion got out of sync in the past, maybe
that's what the issue was here.
Deleting the entries from the .xml makes it fall back to the default values.
Forbid add quick fur operator from adding fur to objects in edit mode.
Fur is not visible for them anyway and because of local undo stack used
in edit mode tweaking values of this operator does not lead to proper
operator redo.
Removed all references of deprecated texture shader. Also deleted
several lines of dead code.
Since texture_shader.py no longer does what it was supposed to do,
the file itself was removed.
Patch reviewed by Tamito Kajiyama (kjym3).
This commit modifies the "New Action" operator to always stash the old action
before it creates a new one. As a result, the old active action will now have
a proper user of sorts after the new one is created, preventing previously
created actions from being lost.
Now that the New operator does this, it can be used for the Action Editor header AND
NLA Editor (Animation Data Panel -> Active Action) again. The "stash and create"
operator is somewhat redundant at this point as a result.
In constrast to the old "new" operator, this operator will stash the existing action
in the stack to prevent it from being lost. This situation isn't totally ideal yet,
since the NLA Editor still calls the old method.
I'm still not sure which version is better, but I suspect that with the labels,
this might help users figure this out more than if they were just unlabelled
icon buttons...
This operator (the snowflake icon, beside the pushdown button on the Action Editor
header) adds the currently active action to the NLA stack in a muted track, then
creates + loads a new action ready to be populated with new keyframes.
Since the NLA is being used to hang on to all the actions here, no actions are
getting lost.
Usage Notes (there will be some additional tweaks to make this nicer):
* To preview different actions that have been "stashed", simply click the "Solo"
toggle for the track containing the action in question. Playing back the NLA will
now show the stashed track
* To edit a previously stashed action - simply enter tweakmode on it in the NLA
while the "Solo" toggle is enabled.
Todo:
* Add some more operators here to polish up the Action <-> NLA bridge to make the
layered and stash workflows smoother. Examples include some tools to easily
switch between the different actions layers in the stack, as well as making it
easier to get out of tweakmode (and sync up the action lengths)
* Review and cleanup the behaviour of the "new" operator here to avoid the old
problems that users were running into
* After the next release - Implement the full Action Libraries functionality, with
ways to bridge the stashed strips over to a full-blown library.
This commit exposes the "Push Down" button/functionality found in the NLA Editor
to the Action Editor, so that actions can be added NLA Stack from here too. The
main point of this for now is to make the whole layered-animation workflow nicer
more efficient, but not requiring the second editor be visible in common cases.
It also conveniently sets things up for the next few changes (already hinted at
here)...
