Texture filtering does not work in the GPU compositor. That's because
filtering is set after textures are bound. It works in the viewport
compositor because the textures come pre filtered from the DRW texture
pool.
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Some common headers were including this. Separating the includes
will ideally lead to better conceptual separation between CustomData
and the attribute API too. Mostly the change is adding the file to
places where it was included indirectly before. But some code is
shuffled around to hopefully better places as well.
This patch implements the defocus node for the Realtime Compositor. The
implementation does not match the CPU compositor implementation, but
uses a new formulation that is more physically accurate and consistent
with Blender's render engines.
The existing CPU implementation is questionable starting from its circle
of confusion calculation, to the morphological operations applied on the
CoC radius, to ignoring the maximum CoC radius in the search kernel, and
ending with the threshold parameter used to reduce artifacts. Therefore,
it should be reimplemented along with this same implementation using a
more consistent methodology.
EEVEE and Workbench already have a GPU defocus method, which can be
ported to the compositor and used as the preview defocus algorithm.
While this implementation will be updated to be a more accurate method
that produces the same structure as the ported EEVEE implementation.
The new formulation ignores the threshold parameter for now, as well as
the preview parameter.
Pull Request: https://projects.blender.org/blender/blender/pulls/116391
Add a new normal mode called "Custom" which directly interpolates
a "custom_normal" attribute to the evaluated points for the final
normal. Extend the "Set Curve Normal" node with this mode and
give it the ability to set the custom normal value.
This is intentionally a very basic implementation of custom normals.
In particular, the storage is not rotation invariant. So the normals
are expected to be set procedurally at the end of the modifier stack.
On the other hand, it is very easy to understand and explain.
Pull Request: https://projects.blender.org/blender/blender/pulls/116066
Except for vertex groups and a few older color types, these
are generally replaced by newer generic attribute types.
Also remove some includes of DNA_mesh_types.h, since it's
included indirectly by BKE_mesh.hh currently.
This is the initial implementation for the volume grid sockets that has been
discussed during the November 2023 geometry nodes workshop.
It adds initial support for passing volume grids around in sockets. Furthermore,
it adds two new nodes. Both are initially hidden under the "New Volume Nodes"
experimental option until we have a few mode nodes.
* **Get Named Grid**: Gets or extracts a volume grid from a volume geometry
based on the grid's name.
* **Store Named Grid**: Puts a volume grid back into a volume with a name.
`SocketValueVariant` is extended to support grids besides single values and fields.
Next steps:
* Implement grid socket shape and inferencing (currently, they just look like
single values).
* Add implicit conversions between grid types.
* Implement nodes that operate on the grids (#116021).
* Improved spreadsheet and viewer support.
Links:
* https://devtalk.blender.org/t/volumes-in-geometry-nodes-proposal/31917
* https://devtalk.blender.org/t/2023-11-06-geometry-nodes-workshop-notes/32007#volumes-3
Co-authored-by: Jacques Lucke <jacques@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/115270
Remove most includes of this header inside other headers, to remove unnecessary
indirect includes which can have a impact on compile times. In the future we may
want more dedicated "_fwd.hh" headers, but until then, this sticks with the
solution in existing code.
Unfortunately it isn't yet possible to remove the include from `BKE_geometry_set.hh`.
Each value is now out of the global namespace, so they can be shorter
and easier to read. Most of this commit just adds the necessary casting
and namespace specification. `enum class` can be forward declared since
it has a specified size. We will make use of that in the next commit.
This refactors how volume grids are stored with the following new goals in mind:
* Get a **stand-alone volume grid** data structure that can be used by geometry nodes.
Previously, the `VolumeGrid` data structure was tightly coupled with the `Volume` data block.
* Support **implicit sharing of grids and trees**. Previously, it was possible to share data
when multiple `Volume` data blocks loaded grids from the same `.vdb` files but this was
not flexible enough.
* Get a safe API for **lazy-loading and unloading** of grids without requiring explicit calls
to some "load" function all the time.
* Get a safe API for **caching grids from files** that is not coupled to the `Volume` data block.
* Get a **tiered API** for different levels of `openvdb` involvement:
* No `OpenVDB`: Since `WITH_OPENVDB` is optional, it's helpful to have parts of the API that
still work in this case. This makes it possible to write high level code for volumes that does
not require `#ifdef WITH_OPENVDB` checks everywhere. This is in `BKE_volume_grid_fwd.hh`.
* Shallow `OpenVDB`: Code using this API requires `WITH_OPENVDB` checks. However, care
is taken to not include the expensive parts of `OpenVDB` and to use forward declarations as
much as possible. This is in `BKE_volume_grid.hh` and uses `openvdb_fwd.hh`.
* "Full" `OpenVDB`: This API requires more heavy `OpenVDB` includes. Fortunately, it turned
out to be not necessary for the common API. So this is only used for task specific APIs.
At the core of the new API is the `VolumeGridData` type. It's a wrapper around an
`openvdb::Grid` and adds some features on top like implicit sharing, lazy-loading and unloading.
Then there are `GVolumeGrid` and `VolumeGrid` which are containers for a volume grid.
Semantically, each `VolumeGrid` has its own independent grid, but this is cheap due to implicit
sharing. At highest level we currently have the `Volume` data-block which contains a list of
`VolumeGrid`.
```mermaid
flowchart LR
Volume --> VolumeGrid --> VolumeGridData --> openvdb::Grid
```
The loading of `.vdb` files is abstracted away behind the volume file cache API. This API makes
it easy to load and reuse entire files and individual grids from disk. It also supports caching
simplify levels for grids on disk.
An important new concept are the "tree access tokens". Whenever some code wants to work
with an openvdb tree, it has to retrieve an access token from the corresponding `VolumeGridData`.
This access token has to be kept alive for as long as the code works with the grid data. The same
token is valid for read and write access. The purpose of these access tokens is to make it possible
to detect when some code is currently working with the openvdb tree. This allows freeing it if it's
possible to reload it later on (e.g. from disk). It's possible to free a tree that is referenced by
multiple owners, but only no one is actively working with. In some sense, this is similar to the
existing `ImageUser` concept.
The most important new files to read are `BKE_volume_grid.hh` and `BKE_volume_grid_file_cache.hh`.
Most other changes are updates to existing code to use the new API.
Pull Request: https://projects.blender.org/blender/blender/pulls/116315
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
Extract:
- Compositor error messages.
- `bUnitDef`s were broken after cleanup commit 2b77cd726d. Since each
unit's "display name" is now preceded by a consistent "name_display"
comment, the regex which extracts the unit is greatly simplified.
It now relies on the presence of the comment instead of the struct
order.
- "Preset" menu and "Apply Preset" button from the curveprofile
template.
- Operator labels from the catalog context menu.
Disambiguate:
- "Bake Data": can mean "Which data to bake" (verb), or "The data that
were baked" (noun).
- "Cache" in the Simulation Nodes panel is a verb, not a noun.
- "Mix" in the snapping menu is a noun, not a verb.
- "Top" and "Bottom" can mean the upper part of an object or the
highest point or element of something like a menu or list.
Pull Request: https://projects.blender.org/blender/blender/pulls/115963
A similar issue was fixed in the commit below for inserting implicit
conversions for links, but it wasn't corrected for conversions in
muted nodes.
Caused by e1d0d70911
Make the naming consistent with the recent change from "loop" to
"corner". Avoid the need for a special type for these triangles by
conveying the semantics in the naming instead.
- `looptris` -> `corner_tris`
- `lt` -> `tri` (or `corner_tri` when there is less context)
- `looptri_index` -> `tri_index` (or `corner_tri_index`)
- `lt->tri[0]` -> `tri[0]`
- `Span<MLoopTri>` -> `Span<int3>`
- `looptri_faces` -> `tri_faces` (or `corner_tri_faces`)
If we followed the naming pattern of "corner_verts" and "edge_verts"
exactly, we'd probably use "tri_corners" instead. But that sounds much
worse and less intuitive to me.
I've found that by using standard vector types for this sort of data,
the commonalities with other areas become much clearer, and code ends
up being naturally more data oriented. Besides that, the consistency
is nice, and we get to mostly remove use of `DNA_meshdata_types.h`.
Pull Request: https://projects.blender.org/blender/blender/pulls/116238
Speedup of node Shortest Edge Paths node by creating an array for
other_edge_vert's and computing them in parallel separate loop.
This also provides better CPU cache by avoiding reading edges in main
loop to find other vertex (which happen multiple time for each vertex).
For cuboid with `700`x`700`x`700` points and `0.066667%` random
selection of `Edge Vertex` this will change `1012.4 ms` -> `618.9 ms`
the in `shortest_paths` function.
Co-authored-by: Hans Goudey <hans@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/114707
This adds a new `Bake` node which allows saving and loading intermediate geometries.
Typical use cases we want address with this currently are:
* Bake some data for use with a render engine.
* Bake parts of the node tree explicitly for better performance.
For now, the format that is written to disk is not considered to be an import/export format.
It's not guaranteed that data written with one Blender version can be read by another
Blender version. For that it's better to use proper interchange formats. Better support for
those will be added eventually as well. We also plan an `Import Bake` node that allows
reading the blender-specific baked data independent of the Bake node and at different frames.
The baking works very similar to the baking in the simulation zone (UI and implementation
wise). Major differences are:
* The Bake node has a `Bake Still` and `Bake Animation` mode.
* The Bake node doesn't do automatic caching.
Implementation details:
* Refactored how we create the Python operators for moving socket items so that it also
makes sense for non-zones.
* The `ModifierCache` stores an independent map of `SimulationNodeCache` and
`BakeNodeCache`, but both share a common data structure for the actually baked data.
* For baking, the `Bake` node is added as a side-effect-node in the modifier. This will make
sure that the node is baked even if it's currently not connected to the output.
* Had to add a new `DEG_id_tag_update_for_side_effect_request` function that is used
during baking. It's necessary because I want to evaluate the object again even though none
of its inputs changed. The reevaluation is necessary to create the baked data. Using
`DEG_id_tag_update` technically works as well, but has the problem that it also uses the
`DEG_UPDATE_SOURCE_USER_EDIT` flag which (rightly) invalidates simulation caches
which shouldn't happen here.
* Slightly refactored the timeline drawing so that it can also show the baked ranges of
Bake nodes. It does not show anything for baked nodes with a in Still mode though.
* The bake operator is refactored to bake a list of `NodeBakeRequest` which makes the
code easier to follow compared to the previous nested
`ObjectBakeData > ModifierBakeData > NodeBakeData` data structure.
* The bake operators are disabled when the .blend file is not yet saved. This is technically
only necessary when the bake path depends on the .blend file path but seems ok to force
the user anyway (otherwise the bake path may be lost as well if it's set explicitly).
* The same operators are used to bake and delete single bakes in `Bake` nodes and
`Simulation Zones`. On top of that, there are separate operators of baking and deleting all
simulation bakes (those ignore bake nodes).
* The `Bake` node remembers which inputs have been fields and thus may be baked as attributes.
For that it uses an `Is Attribute` flag on the socket item. This is needed because the baked data
may still contain attribute data, even if the inputs to the bake node are disconnected.
* Similar to simulation zones, the behavior of `Bake` nodes is passed into the geometry nodes
evaluation from the outside (from the modifier only currently). This is done by providing the
new `GeoNodesBakeParams` in `GeoNodesCallData` when executing geometry nodes.
Next Steps (mostly because they also involve simulations):
* Visualize nodes that have not been evaluated in the last evaluation.
* Fix issue with seemingly loosing baked data after undo.
* Improve error handling when baked data is not found.
* Show bake node in link drag search.
* Higher level tools for managing bakes.
Pull Request: https://projects.blender.org/blender/blender/pulls/115466
This refactors `SocketValueVariant` with the following goals in mind:
* Support type erasure so that not all users of `SocketValueVariant` have
to know about all the types sockets can have.
* Move towards supporting "rainbow sockets" which are sockets whoose
type is only known at run-time.
* Reduce complexity when dealing with socket values in general. Previously,
one had to use `SocketValueVariantCPPType` a lot to manage uninitialized
memory. This is better abstracted away now.
One related change that I had to do that I didn't see coming at first was that
I had to refactor `set_default_remaining_outputs` because now the default value
of a `SocketValueVariant` would not contain any value. Previously, it was
initialized the zero-value of the template parameter. Similarly, I had to change
how implicit conversions are created, because comparing the `CPPType` of linked
sockets was not enough anymore to determine if a conversion is necessary.
We could potentially use `SocketValueVariant` for the remaining socket types in the
future as well. Not entirely sure if that helps yet. `SocketValueVariant` can easily be
adapted to make that work though. That would also justify the name
"SocketValueVariant" better.
Pull Request: https://projects.blender.org/blender/blender/pulls/116231
Fix error of wrong parameter for `compare_exchange_weak`. Second
one parameter is used for write new value, but a mistake occurred and
the wrong parameter (for read) was used. Default param is enough for
this, so just delete last one.
Pull Request: https://projects.blender.org/blender/blender/pulls/116010
The term `looptri` was used ambiguously for both single & arrays.
The term `tri` was also used, causing `tri->tri`.
Use terms:
- `looptris` for an array or when dealing with multiple items.
- `looptri` is used when dealing with a single item.
- `lt` for a single MLoopTri variables & arguments.
This was already a convention but not followed closely.
Doing this in preparation for also supporting volume
grids in the same type (#115270).
At some point we could also actually use an `std::variant` in this
type, but that would change behavior without futher changes.
