FLT_EPSILON was added to the threshold when comparing values,
this caused problems selecting similar small faces since the areas
can be very small in this case.
Also increase the displayed precision so it's easier to use
smaller numbers.
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
- Optionally get the error as a single line.
- Support access the error as an allocated string.
- PyC_ExceptionBuffer_Simple was always printing to the `stdout` while
PyC_ExceptionBuffer didn't, now either print to the output.
Without this, callers are unable to do anything with the error string.
Allow users to undo the effect of the "Generate Preview" operator in the
asset browser (`ED_OT_lib_id_generate_preview`). Without this, the
button is too dangerous.
Without legacy-undo, loading memfile undo only cleared edit-mode data
for mesh and armature object types.
This causes an assertion when loading edit-mode undo steps afterwards
for other object types as the existence of this data made entering
object mode fail.
Resolve this by freeing all objects types undo data from ED_editors_exit
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
It seems generally preferred to have new files be created with C++.
The only reason I didn't do that when I initially created the files is that I
was unsure about some C-API aspect.
Also use nullptr instead of NULL.
While the previous fix for T84920 is correct, the crash could still be
triggered by changing the active object while in edit-mode.
Ensure stale data isn't used by tagging for depsgraph update when
edit-mode data is freed on undo.
While exiting edit-mode normally does this, it's possible to set the
active object to a non edit-mode mesh, skipping the mode-switch
operator and it's depsgraph tagging.
* This way you don't have to look up the function declaration to know what the
boolean value means.
* You can call the function in a loop over the available sizes and pass the
index as size.
* Makes it easier to add a new size in future if needed.
With the new `ed_util_ops.c` introduced in 2250b5cefe, existing code can be
cleaned up to use it.
* Move new ID preview operators to `ed_util_ops.c`
* Move ED operator registration to `ed_util_ops.c`
* Use doxygen sections in `ed_util_ops.c`
* Rename ID related ED operators to use `ED_OT_lib_id_` prefix.
* Remove unused `#include`s
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
This makes it possible to trigger a refresh of the data-block preview,
available next to the preview in the Asset Browser sidebar. The previews get
easily outdated and automatically refreshing it all the time is not an option
because it would be a consistently running, quite expensive process. So a
button to cause a refresh should be reasonable.
This button can also be used to switch back from a custom preview to a
generated one. Although that may not be clear, and we should probably think of
a way to explain that better.
Addresses T82719.
* Support defining (not necessarily rendering) icons in threads. Needed so the
File Browser can expose file previews with an icon-id to scripts.
** For that, ported `icons.c` to C++, to be able to use scope based mutex locks
(cleaner & safer code). Had to do some cleanups and minor refactoring for
that.
* Added support for ImBuf icons, as a decent way for icons to hold the file
preview buffers.
* Tag previews as "unfinished" while they render in a thread, for the File
Browser to dynamically load previews as they get finished.
* Better handle cases where threaded preview generation is requested, but the
ID type doesn't support it (fallback to single threaded). This is for general
sanity of the code (as in, safety and cleanness)
* Enabled asset notifier for custom preview loading operator, was just disabled
because `NC_ASSET` wasn't defined in master yet.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9719
Reviewed by: Bastien Montagne, Brecht Van Lommel
This makes it possible to turn data-blocks into assets and back into normal
data-blocks. A core design decision made for the asset system is that not every
data-block should be an asset, because not every data-block is made for reuse.
Users have to explicitly mark data-blocks as assets.
Exposes "Mark Asset" and "Clear Asset" in Outliner context menus (currently ID
Data submenu) and button context menus. We are still not too happy with the
names, they may change.
This uses the new context members to pass data-blocks to operators, added in
af008f5532 and 0c1d476923.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9717
Reviewed by: Brecht Van Lommel
No automatic preview generation will ever be good enough to cover all cases
well. So custom preview images are a must for a preview driven data-block
selection - like for asset browsing.
The operator simply allows selecting an image file, which will then be read and
copied into the data-blocks preview (resized if necessary).
There's no UI for this currently and the operator won't be available in the
search menu yet. It will later once the Asset Browser UI is merged.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
Replace BKE_sequencer wirh SEQ_render or SEQ_proxy prefixes.
In cases where function is very generic, only SEQ prefix is used.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9439
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
Those two functions had `BKE_` prefix, were defined in BKE headers, but
implemented in ED code, yuck.
Moved everything to ED area for now, since those do not look fondamental
enough to belong to BKE, and none of their usages requires it currently.
Based on the original patch by Vaishnav S (@padthai), this adds
support for temperature units. Initially supported units are Celsius,
Kelvin, and Fahrenheit.
The units aren't used anywhere with this commit. Those changes should
happen in separate patches by adding PROP_TEMPERATURE to RNA property
definitions. But it should be ensured that the various solvers and
simulations actually properly use real units.
The complexity of some of the changes comes from the fact that these
units have offsets from each other as well as coefficients. This also
makes the implementation in the current unit system troublesome.
For example, entering 0C evaluates correctly to 273K, but 0C + 0C
doubles that result, because each unit value is evaluated separately.
This is quite hard to solve in the general case with Blender's current
unit system, though, so it is not handled in this commit.
Differential Revision: https://developer.blender.org/D4401
This was caused by a double lock of the DRW context mutex.
This changes the logic a bit by releasing the DRW context before rendering
with BKE_sequencer_give_ibuf and restoring it after.
Critical fix for 2.91
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D8657
This commit renames 'execute' to 'run' because:
- This follows Python's "PyRun" which these functions wrap.
- Execution functions can use either exec/eval modes,
making naming awkward (for future API refactoring).
Showing the Python error without any explanation is often
not enough information and doesn't hint that the error was in the
user input.
The error report from a invalid expression such as '..1' used to be:
('invalid syntax', ('<string>', 1, 1, '..1'))
Now reads:
Error evaluating number, see Info editor for details: invalid syntax
Address issue raised by T78913.
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
